Joy-it RB-CASE+12 Handleiding

Joy-it Niet gecategoriseerd RB-CASE+12

Bekijk gratis de handleiding van Joy-it RB-CASE+12 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.7 sterren uit 23 reviews. Heb je een vraag over Joy-it RB-CASE+12 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/3

RASPBERRY PI CASE

RB-Case+12

1. GENERAL INFORMATION

Dear customer,

thank you for choosing our product. In the following, we will show you how

to use your product.

Should you encounter any unexpected problems during use, please do not

hesitate to contact us.

This case is perfect for all maker and handicra enthusiasts because it

protects the Raspberry during experiments and test setups.

2. ASSEMBLY

First of all, you should remove the protective lm from both sides gently.

Aer that four synthetic spacers must be pinned and attached with synthetic

nuts.

Now you can put the Raspberry Pi onto the spacers and screw it tight with

four synthetic screws.

3. SUPPORT

If any questions remain open or problems arise aer your purchase, we are

available by email, telephone and ticket support system to answer these.

E-Mail: service@joy-it.net

Ticket-System: http://support.joy-it.net

Telephone: +49 (0)2845 98469 – 66 (10 - 17 o‘clock)

For more information visit our website:

www.joy-it.net

Simac Electronics Handel GmbH

Pascalstr. 8 47506 Neukirchen-Vluyn

Published: 01.08.2019

Finally, screw the brass spacer tight at the bottom and the top.

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	RB-CASE+12
Kleur van het product:	Transparant
Gewicht:	52 g
Breedte:	75 mm
Diepte:	104 mm
Hoogte:	31 mm
Materiaal:	Acrylic, Brass
Merkcompatibiliteit:	Raspberry Pi
Compatibiliteit:	Raspberry Pi
Type product:	Behuizing