Joy-it RB-AlucaseP4+08 Handleiding

Joy-it Niet gecategoriseerd RB-AlucaseP4+08

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it RB-AlucaseP4+08 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 110 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

www.joy it.net-

Pascalstr. 8 47506 Neukirchen Vluyn-

ALALUMINIUM CASE F

UMINIUM CASE F

UMINIUM CASE FUMINIUM CASE FOR RASPBERRY PI 4

OR RASPBERRY PI 4

OR RASPBERRY PI 4OR RASPBERRY PI 4

RB-AlucaseP4+08

1. GENERAL INFORMATION

1. GENERAL INFORMATION1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you

which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to

contact

us.

www.joy it.net-

Pascalstr. 8 47506 Neukirchen Vluyn-

2. ASSEMBLY

2. ASSEMBLY2. ASSEMBLY

1. -Stick the heat conducting pad on the Raspberry Pi 4 like shown in

the following picture:

2. Next, you have to put your Raspberry Pi 4 into the bottom side of

the case.

Pascalstr. 8 47506 Neukirchen Vluyn-

3. Now put the top onto the bottom part and turn around the Rasp-

berry Pi 4 with the case .

4. The case must be screwed tight now. Do this at the bottom part

of the case. Thereby please note that the shorter screws must be

used on the side with the HDMI ports and the longer ones on the side

-of the GPIO pins. The screws can be tightened with the help of the al

len key included in the scope of delivery.

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	RB-AlucaseP4+08
Kleur van het product:	Zwart
Breedte:	65 mm
Diepte:	91 mm
Hoogte:	34 mm
Materiaal:	Aluminium
Merkcompatibiliteit:	Raspberry Pi
Compatibiliteit:	Raspberry Pi
Type product:	Behuizing