Joy-it ARD-CNC-Kit2 Handleiding
Joy-it
Niet gecategoriseerd
ARD-CNC-Kit2
Bekijk gratis de handleiding van Joy-it ARD-CNC-Kit2 (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Joy-it ARD-CNC-Kit2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
CONTROLLER BOARD CNC
4x DRV8825 motor driver for Arduino Uno
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
. GENERAL INFORMATION & SAFETY INSTRUCTIONS
. SAFETY INSTRUCTIONS
Dear customer
thank you for choosing our product. In the following
we will show you what you need to bear in mind when commissioning and
using.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This set lays the foundation for installing a customised CNC router. The
controller board is suitable for use with the Arduino Uno or Arduino Uno
compatible boards and can be operated with 12 to 35 V as required.
Up to 4 axes can be controlled with the supplied DRV8825 motor drivers.
The expansion board is easy to control as it is 100% 0.9
GRBL
compatible.
As this expansion board can be used to control potentially dangerous machi-
nes, please observe the following safety instructions:
Never reach into the machining area while the machine is running.
Do not remove any chips by hand. Use tools such as
brushes, hand brushes or compressed air for this purpose. Tools and
workpieces must never be changed while the tool spindle
is running. Ensure that the workpieces are suiciently
secured so that the workpiece can never be moved out
of position due to the resulting load, e.g. when drilling or
milling. Never leave the machine running unattended! Always
keep a safe distance from the running machine.
Only use the ARD-CNC-Kit2 in dry environments.
When using components from other manufacturers, please find out about
their safety regulations and observe them.
We are not liable for damage caused by improper use.
3. PIN ASSIGNMENT
Control unit 1
Control unit 1
• RST (reset button top le):
Resets the board.
• E-STOP (emergency stop)
Stops all movements immediately by resetting the controller.
The E-Stop integrated on the CNC shield is suicient for many cases, but
is not a fully-fledged safety solution. An external emergency stop switch
that directly interrupts the power supply is the safest option for machi-
ne operation.
• EN (Enable)
Activates or deactivates all 4 stepper motor drivers.
• X.STEP/DIR, Y.STEP/DIR, Z.STEP/DIR, A.STEP/DIR
These signals control the step and direction movements of the stepper
motors for the respective axis. The le pin is for the step signal and the
right pin for the direction signal of the respective axis.
• 5V/GND
Supply voltage for the control logic.
Axis cloning
Power supply
Motor connec-
tions
Communication
End Stops
Control unit 2
Product specificaties
| Merk: | Joy-it |
| Categorie: | Niet gecategoriseerd |
| Model: | ARD-CNC-Kit2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Joy-it ARD-CNC-Kit2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Joy-it
15 Juni 2025
7 April 2025
7 April 2025
30 Januari 2025
28 Januari 2025
28 Januari 2025
14 Januari 2025
4 December 2024
4 December 2024
18 November 2024
Handleiding Niet gecategoriseerd
- SmartAVI
- SAUTVS
- Brandson
- Kogan
- Proficare
- Benning
- Asrock
- Neunaber
- OSEE
- Hilti
- Newstar
- Varad
- Balam Rush
- Fortinet
- SmartGyro
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025