Joranalogue Route 4 Handleiding

Joranalogue Niet gecategoriseerd Route 4

Lees hieronder de 📖 handleiding in het Nederlandse voor Joranalogue Route 4 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
ROUTE 4
LATCHING SIGNAL ROUTER
1
INTRODUC TION
Flexible Eurorack signal paths under gate or
trigger control: that is the basic principle behind
Route 4. Consisting of a pair of complementary
routing sections, it grants access to a new level of
signal routing options.
The module's top section is a 4-to-1 router. Any of
the four signal inputs may be selected to be
mixed into the section's output, as determined
by the control inputs.
Control can either be gate or latch driven—in the
latter case, the signal inputs are toggled on and
off by received trigger pulses. Meanwhile, the
solo/multi switch determines whether the inputs
are exclusive, or if multiple may be active at the
same time.
With each input socket biased by a +1 V precision
voltage source when left unused, gate or trigger
controlled transposition of pitch sequences
becomes a breeze.
On the bottom, the 1- -to 4 router provides the
same feature set, with a single input being
routed to up to four outputs and normalisation
between the sections adding some patching
convenience.
All signal paths are designed for use with any
Eurorack signals, whether they be control
voltages, audio or gate streams. Visual feedback
is provided by 10 responsive LEDs, continually
displaying the status of the routers.
With Route 4, a n 8 -HP super flexible analogue
mixing and routing powerhouse has arrived to
fuel your patching imagination. The ability to
redirect signals within a modular system on the
fly, with an unparalleled level of control, is sure to
excite even the most seasoned patcher.
CONTENTS
In the Route ’ll 4 box, you find:
 Product card, stating serial number and
production batch.
 16- - -to 10 pin Eurorack power cable.
 Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
 T 4 he Route module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
ROUTE 4
LATCHING SIGNAL ROUTER
2
CONTROLS & CONNECTIONS
1 GATE/LATCH SWITCH
The Routegate/latch switch determines how 4
will respond to its control inputs. In gate mode,
signal routing channels are only enabled as long
as the corresponding control input is high.
When switched to latch mode, a rising edge on a
control input will toggle the state of the
corresponding routing channel between
enabled and disabled.
Each section has its own gate/latch switch,
allowing different behaviour to be selected for
the module’s top and bottom routers.
2 SOLO/MULTI SWITCH
When this switch is in solo mode, only one signal
routing channel may be active at a time. A rising
edge on any control input will disable all other
routing channels.
In this mode, applying simultaneous rising edges
to two or more inputs will trigger a global reset,
disabling all channels.
When the switch is set to multi mode, any
number of channels may be enabled
simultaneously.
Each section has its own solo/multi switch,
allowing different behaviour to be selected for
the module’s top and bottom routers.
ROUTE 4
LATCHING SIGNAL ROUTER
3
3 TOP SECTION ROUTING INPUTS
The top section of Route -4 is a 4 to-1 router. Up to
four channels of audio, CV or gates may be
added together, as determined by the control
inputs and mode switches.
Each input socket is equipped with a precision
+1 V normalisation. This means that it is possible
to create 1 , V, V voltage steps up to +4 when all
sockets are left unused. It also allows pitch CV
information, applied to one of the sockets, to be
transposed in octave steps, from 0 up to 3
octaves.
4 C ONTROL LEDS
The status of each routing channel is displayed
on the corresponding LED in real time, providing
valuable visual feedback.
5 CONTROL INPUTS
The control inputs are used to enable and disable
routing channels. They function as either gate or
trigger inputs, depending on the state of the
gate/latch switch.
All of Route 4’s control inputs are uniquely
designed to be driven reliably even from weak,
slow, bipolar signals. They feature Schmitt action,
with a +2 V high logic threshold. V low and +3
6 TOP SECTION ROUTING OUTPUT
This impedance compensated output provides -
the mix of the currently enabled routing inputs,
with high accuracy, suitable for pitch CV use.
7 BOTTOM SECTION ROUTING INPUT
The bottom section of Route -4 is a 1 to-4 router.
Any signal applied to this input socket may be
sent to up to four destinations.
When nothing is plugged into th socket, the e
output of the top section is sent to this input by
default.
8 BOTTOM SECTION ROUTING OUTPUTS
When enabled, these impedance-compensated
outputs provide identical copies of the section’s
input signal. Their high accuracy makes them
suitable for pitch CV use.

Product specificaties

Merk: Joranalogue
Categorie: Niet gecategoriseerd
Model: Route 4

Heb je hulp nodig?

Als je hulp nodig hebt met Joranalogue Route 4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Joranalogue

Joranalogue

Joranalogue Contour 1 Handleiding

29 Juni 2023
Joranalogue

Joranalogue Route 4 Handleiding

21 Juni 2023
Joranalogue

Joranalogue Generate 3 Handleiding

20 Juni 2023
Joranalogue

Joranalogue Step 8 Handleiding

19 Juni 2023
Joranalogue

Joranalogue Select 2 Handleiding

19 Juni 2023
Joranalogue

Joranalogue Compare 2 Handleiding

16 Juni 2023
Joranalogue

Joranalogue Orbit 3 Handleiding

15 Juni 2023
Joranalogue

Joranalogue Enhance 2 Handleiding

15 Juni 2023
Joranalogue

Joranalogue Morph 4 Handleiding

14 Juni 2023
Joranalogue

Joranalogue Dim 2 Handleiding

13 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024