IFM E20754 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E20754 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Anwendungshinweise für 90°-Aufschraublinsen
Operating instructions for 90° attachments
Notice de montage pour des lentilles à renvoi d'angle 90°
Sach-Nr. 701351 / 00 01/99
Die 90°-Aufschraublinse lenkt den Lichtstrahl mittels eines Umlenkprismas, welches
eine zylindrische Austrittsfläche hat, um.
Durch den seitlichen Lichtaustritt/Lichteintritt können auch schwer zugängliche
Abtastbereiche erreicht werden.
Die zylindrische Austrittsfläche wirkt wie eine Linse, so daß eine
Reichweitenerhöhung erzielt werden kann.
R
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
Schrauben Sie die Aufschraublinse (A) bis zum Anschlag
auf den Tastkopf (B) des Lichtleiters, da sonst nicht die
maximale Reichweite / Betriebsreserve erreicht wird.
Die Linsenwirkung der zylindrischen Austrittsfläche bei zu
großem Abstand zwischen Tastkopfende und Austritts-
fläche führt zur Defokussierung des Lichtstrahls.
The attachment turns the light beam through 90° by means of a prism with a
cylindrical light exit.
The lateral light exit/entrance allows detection in areas with difficult access.
The cylindrical light exit behaves as a lens thus increasing available sensing range.
La lentille à renvoi d'angle 90° renvoie le faisceau à l'aide d'un prisme déviateur qui
a une sortie de lumière cylindrique.
La sortie/l'entrée latérale de la lumière permet la détection de zones d'accès difficile.
La sortie de lumière à travers une lentille permet d'augmenter la portée.
Screw the attachment (A) until you feel the end of the
fibre optic sensing head (B), otherwise the maximum
sensing range/excess gain will not be achieved. If the
distance between the end of the sensing head and the
light exit is too great, the lens effect of the cylindrical
light exit brings the light beam out of focus.
Visser la lentille à renvoi d'angle (A) jusqu'à la butée de
la tête de détection (B) de la fibre optique. Si cela n'est
pas fait, la portée/capacité de réserve maximale n'est pas
assurée. En cas de distance trop grande entre la fin de la
tête de détection et la sortie de lumière, l'effet de lentille
de la sortie de lumière cylindrique défocalise le faisceau.
A
B


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E20754

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E20754 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd