Ikan Mylo MSB8 Handleiding
Bekijk gratis de handleiding van Ikan Mylo MSB8 (4 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.8 sterren uit 3.5 reviews. Heb je een vraag over Ikan Mylo MSB8 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
support@ikancorp.com © 2017 ikan Corporation. All rights Reserved
www.ikancorp.com
713.272.8822
CHECKED BY
What’s Included
1 x Mylo Soft Half x 1 Light Fixture
1 x Dual Battery Charger
1 x Power Supply for Dual Charger
1 x Power Supply with Cable
1 x Yoke
2 x Sony “L” Series Style Batteries
QUICKSTART GUIDE
MSB8
Mylo Soft Bi-Color Half x 1 Field LED Light
Getting to know your Mylo Soft Bi-Color LED Light
Precautions:
Keep the fixture away from water and all flammable gasses or liquids
Use only the recommended batteries
Handle unit with care
DO NOT attempt to disassemble or repair the unit without first contacting the service department at ikancorp.com
Keep the unit clean and free of dust, it can be cleaned with a soft, dry cloth
Use only parts provided by the manufacturer
ALWAYS use caution when plugging in the fixture
Mounting the Mylo Soft to a Stand:
The Mylo Soft comes with pre-installed yoke and combo mount. This allows the fixture to easily sit and adjust on any stand.
The yoke allows the light to move freely without obstruction. The Baby 5/8” and Junior1 1/8” Combo Pin gives the user a wide
range of stand options. The light can be mounted horizontally or vertically.
Power the LEDs:
The Mylo Soft light comes with an AC power supply and 6 foot cable. This allows the user to plug into any standard 120-240V
electronic outlet. The Mylo Soft can be powered from one of two Sony “L” Series Style Batteries that are supplied with the unit.
Adjusting the Color & Brightness of the Light:
The Mylo Soft is controlled by the large yellow knob on the rear of the fixture. The knob was designed with the idea that it could
be reached and adjusted when the light is up on the stand. The knob has two push settings.
1. The default setting is the brightness from 10-100% brightness.
2. By pressing in on the knob, the color temperature can be adjusted from 3200K-5600K.
Mylo Battery Options:
The dual battery charger allows you to charge both batteries at the same time.
Connect the power cable to the AC charger and plug it into a wall.
1. Place one or both battery packs into the charger and slide it towards the indicator lights.
2. The indicator lights will illuminate with how much charge is left on the battery.
3. The charger will begin charging once the battery is fully inserted into the charger. (Note: The battery is fully charged
when all lights are solid red.
Attaching the battery pack to the back of the Mylo Soft can be done by placing the battery against the back of the Mylo battery
port and sliding it forward.
Properly store the batteries when not in use. If the batteries will not be used for an extended period of time, run down the battery
and store it with the Mylo Soft.
Specifications
Optional Accessories
Some other products that work well with the Mylo Soft Lights available from Ikan include:
HD-STND
ROLLR-STND10
CP-STND-V3
SW-04
KCP-703
Heavy Duty Light Stand
2-Stage Roller Stand 10 ft 6 in.
Compact Light Stand Version 3
Safety Wire
Stage Clamp w/ 16mm Stud
Fixture Specifications
Beam Angle 110°
Build Material Heavy Duty Metal Construction
Cooling System Passive Cooling
Dimming Knob Control
Fixture Size 19 x 13 x 3.2 in.
Fixture Weight 8 lbs
Head Type Bi-Color 3200K-5600K
Power Supply Input: 100-240VAC
Output: 12VDC @5.0A
Yoke Baby 5/8 -- Junior 1 1/8" "
Charging Times:
Normal Charging Time Fully Charge Time
NP-F970 ~373 minutes ~450 minutes
Be sure to charge the battery pack before you start using your Mylo Soft
We recommend charging the battery pack in an ambient temperature of between 50°F~86°F until the charge lamps
are fully lit. If you charge the battery pack outside of this temperature range, you may not be able to charge it efficiently.
Battery pack performance decreases when the temperature is 50°F or below, and the length of time you can use the
battery pack becomes shorter. If temperatures are below 50°F we recommend that you put the battery in a pocket to
warm it up, and then insert them into the Mylo Soft right before you turn the light fixture on.
About Battery Life
Battery capacity decreases over time and through repeated use. If you notice problems with the battery keeping a
charge, it is probably time to replace it with a new one. Each battery’s life is governed by storage, operating, and
environmental conditions.
Product specificaties
| Merk: | Ikan |
| Categorie: | Lamp |
| Model: | Mylo MSB8 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ikan Mylo MSB8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamp Ikan
2 Juli 2025
1 Juli 2025
1 Juli 2025
19 Maart 2025
Handleiding Lamp
- Innoliving
- Lightaccents
- Setti+
- Frandsen
- Neewer
- EMOS
- Sunnydaze Decor
- Brennenstuhl
- Paul Neuhaus
- Akasa
- Graypants
- Artemide
- Silvercrest
- Canon
- Osram
Nieuwste handleidingen voor Lamp
1 Juli 2025
1 Juli 2025
1 Juli 2025
29 Juni 2025
29 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025