IDIS DA-EC1101T Handleiding

IDIS Niet gecategoriseerd DA-EC1101T

Lees hieronder de 📖 handleiding in het Nederlandse voor IDIS DA-EC1101T (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Ethernet

over Coax

Transceiver

DA-EC1101R

DA-EC1101T

Operation Manual

Before Using the Product

FCC Compliance Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at

his own expense.

User’s Caution Statement

Caution: Any changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Product Overview

DA-EC1101R / DA-EC1101T is a networking device(EOC: Ethernet Over Coax) that uses

coaxial cables. It makes it possible to supply Power over Ethernet and transmit data

between a network camera that uses RJ45 port and a DVR using coaxial cables.

Product Features

●Makes it possible to install Full-HD network cameras using existing coaxial cables.

●10/100Base-T two-way communication allows use of the product as a transmitter or

a receiver.

●Supports PoE (IEEE 802.3af, IEEE 802.3at)

●Supports Plug & Play without setting up special IP addresses.

●Supports up to 800 meters in distance.

Accessories

The product consists of the following components.

BNC

48VDC

RJ45

Power

PoE

Mac Address

Main unit

(DA-EC1101R /

DA-EC1101T)

48V DC adapter &

220V power cable

(DA-EC1101R only)

Operation Manual MAC address

sticker

MAC Address is required for warranty services. Please keep the sticker attached on the product.

First, connect the adapter to the product. Then, turn the device On. If the adapter is connected while the

switch is turned On, it may cause an electric spark. Be careful when using the product at a gas station or

near combustible substances.

Product specificaties

Merk:	IDIS
Categorie:	Niet gecategoriseerd
Model:	DA-EC1101T
Kleur van het product:	Zwart
Gewicht:	145 g
Breedte:	43 mm
Diepte:	100 mm
Hoogte:	39 mm
Certificering:	FCC, CE, KC
Plug and play:	Ja
Ingangsspanning:	48 V
Netwerkstandaard:	IEEE 802.3af, IEEE 802.3at
Soort aansluiting:	BNC
Maximale overdrachtssnelheid van gegevens:	85 Mbit/s
Auto MDI/MDI-X:	Ja
Maximaal bereik:	800 m
Stroomverbruik (typisch):	60 W
Bedrijfstemperatuur (T-T):	-10 - 85 °C
SFP transceiver type:	Koper
Duplex systeem:	Full, Half