Hama X20 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hama X20 (54 pagina's) in de categorie powerbank. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/54
20000 mAh
00
178985
“X20”
Po Pawer ck
E
F
D
GB
NL
PL
CZ
RUS
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Руководство по эксплуатации
Gebruiksaanwijzing
Instrukcja obs ugił
Használati útmutató
Návod k použití
Návod na použitie
Manual de instruçõe
Manual de utilizare
Работна инструкция
SK
P
RO
BG
H
2
Thank you for choosing a Hama product.
Take your time and ad the following instructions and information completelyre . Please keep these
instructions in a safe place for future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specic hazards
and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
Power ck “X20”, 20000 mAhPa
Micro-USB charging/connecting cable
These operating instructions
3. Safety Notes
The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Keep this product, as all electrical products, out of the ach of children!re
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the speci cations.
Do not open the device or continue to operate it if it becomes damaged.
Dispose of packaging material immediately according to locally applicable gulations.re
Since the battery is integrated and cannot be moved, you will need to dispose of the product asre
a whole. Do this in compliance with the legal quirements.re
Do not modify the product in any way. Doing so voids the warranty.
4. Operation
4.1 Charging the Power Pack
Begin charging the power pack by connecting the included Micro-USB charging/connecting cable
to the power pack’s Micro-USB (IN 5 V/2 A) input and to a suitable USB charger. Please fer tore
the operating instructions for the USB charger used. Alternatively, you can also charge the power
pack using the power pack’s USB pe-C socket (Ty IN 5V/2.6A) and a suitable cable.
Charging begins and ends automatically.
Charge the wer ck fully beforPo Pa e using it for the rst time.
G Operating instruction
3
Note – Capacity
The capacity is always shown when the wer ck is charging.Po Pa
Each status LED corresponds to 25% of the capacity. When an LED is permanently illuminated,
this indicates that this capacity level has already been ached. The wer ck is charged tore Po Pa
at least 75% if three LEDs are illuminated, and the fourth is ashing.
If all four status LEDs light up, the full capacity is available.
Press the button of the wer ck to switch it on and to check its current capacity.Po Pa
To switch the power pack off, press the button twice until the status LEDs go out.
Warnung – Battery
Do not charge the power pack using your PC or the notebook. The charging currents can
damage the USB port of the PC/notebook.
Only use suitable charging devices or USB connections for charging.
As a rule, do not charge devices or USB connections that are defective and do not try to pairre
them yourself.
Do not overcharge the product or allow the battery to completely discharge.
Avoid storing, charging or using batteries in extreme temperatures.
When stored over a long period of time, batteries should be charged gularly (at least everyre
three months).
4.2 Charging terminal devices
Connect the included Micro-USB charging/connecting cable to the USB port on the power pack
(OUT 5V/3A) and to the Micro-USB port on your terminal device (mobile phone, smartphone,
etc.).
The Micro-USB charging/connecting cable included may not be suitable for the USB connection on
your terminal device. In this case, use the USB cable that was included with your terminal device.
When using the USB pe-C output for charging, please connectTy a suitable USB pe-C chargingTy
cable to the power pack’s (OUT 5V/3A) USB pe-C output and to the port of your terminal device.Ty
Charging begins automatically. The status LEDs show the maining capacity when the wer ckre Po Pa
is charging.
The current battery status of your terminal device will appear on this device.
Press the button on the power pack twice to stop charging and switch it off. The status LEDs
should switch off.
The wer ck will automatically switch off if it is not connected toPo Pa a terminal device.
Warning – Connecting terminal devices
Before connecting a terminal device, check whether the power output of the charger can
supply su cient power for the device.
Ensure that the total power consumption of the connected terminal device does not exceed
3000
mA.
Please fer to the instructions in the operating manual of your terminal device.re
It is essential that you observe these speci cations and the safety instructions garding there
power supply of your devices.
The power pack must not be charged and discharged at the same time!


Product specificaties

Merk: Hama
Categorie: powerbank
Model: X20

Heb je hulp nodig?

Als je hulp nodig hebt met Hama X20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding powerbank Hama

Handleiding powerbank

Nieuwste handleidingen voor powerbank