Fluke ITP120 Handleiding

Bekijk gratis de handleiding van Fluke ITP120 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Fluke ITP120 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

®

ITP 120

Isolated Trigger Probe

Instruction Sheet

Introduction

The ITP 120 is an optically isolated trigger probe for

isolated trigger purposes with the Fluke 120 series

ScopeMeter test tool.

Specifications

Probe Characteristics

Maximum floating voltage to ground: 600V

Maximum input voltage: 600V (with 600V Mini

Testhook)

Maximum non-destructive input voltage times

frequency: 109

Input resistance: 10 MΩ ± 1%

Input capacitance: 15 pF ± 10%

Probe length: 1.2 m (48 inch)

Trigger Characteristics

Trigger level: TTL compatible (High ≥ 2V, Low ≤ 0.8V)

Minimum pulsewidth: 7 µs

Frequency range: DC to 50 kHz

Trigger slope selectable on the ScopeMeter test tool.

Battery Type: Alkaline 9 volt, NEDA, IEC6LR61

Battery Life: 60 hour operation

June 1996, Rev. 3, 4/10

© 1996, 1997, 2010 Fluke

Corporation.

All rights reserved.

Printed in The Netherlands.

All product names are trademarks of their respective companies

Environmental Specifications

Meet requirements of:

•MIL-T-28800E, Type III, Class 3

•EN 50081-1, Electromagnetic Compatibility

Generic Emission Standard: EN55022 and

EN60555-2

•EN 50082-1, Electromagnetic Compatibility

Generic Immunity Standard: IEC1000-4 -2, -3, -4,

-5

This product is in conformity with Electromagnetic

Compatibility Directive 2004/108/EC, and Low Voltage

Directive 2006/95/EC.

This conformity is indicated by the symbol , i.e.

“Conformité européenne”

Temperature:

Operating: 0 °C to +50 °C (32 °F to +122 °F)

Non-operating: -40 °C to +70 °C (-40 °F to +158 °F)

Safety

Meets requirements of:

•UL 3111

•IEC1010-2-031 CAT II 600V ( Double Insulation)

Unpacking

Check that the following items are included with the ITP

120:

•Trigger Probe

•Mini Testhook (with ground lead)

•9V Battery (installed)

Using the ITP 120

Limited Warranty &

Limitation of Liability

This Fluke product will be free from defects in material

and workmanship for one year from the date of

purchase. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect,

misuse or abnormal conditions of operation or handling.

Resellers are not authorized to extend any other

warranty on Fluke’s behalf. To obtain service during the

warranty period, send your defective product to the

nearest Fluke Authorized Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO

OTHER WARRANTIES, SUCH AS FITNESS FOR A

PARTICULAR PURPOSE, ARE EXPRESSED OR

IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY.

Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation Fluke Industrial B.V.

P.O. Box 9090 P.O. Box 90

Everett WA 98206-9090 7600 AB Almelo

USA. The Netherlands

Service Centers

To locate an authorized service center, visit us on the

World Wide Web:

http://www.fluke.com

or call Fluke using any of the phone numbers listed

below:

+1-888-993-5853 in USA and Canada

+31-40-2675200 in Europe

+1-425-446-5500 from other countries

Product specificaties