Fluke 718Ex Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 718Ex (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
718Ex 30G/100G/300G
Pressure Calibrator
Users Manual
May 200 Rev. 4 3, 5 9 /1
© 200 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.4-2019
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is
three years (one year for pump assembly) and begins on the date of shipment. Parts, product repairs, and services are warranted for 90
days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, dis-
posable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident
or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional spec-
ifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or
operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to ex-
tend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized
sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of re-
pair/replacement parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective
product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the
product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk
for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling,
including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components,
Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be
returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping
Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THE ORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequen-
tial damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any
other provision.
11/99
Fluke Corporation
P.O. Box 9090
Ev - erett, WA 98206 9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
i
Table of Contents
Title Page
Introduction..................................................................................................................... 1
C ontact Fluke ................................................................................................................. 2
Safety Information .......................................................................................................... 2
Faults and Damage ................................................................................................... 7
Safety Regulations..................................................................................................... 8
Getting Acquainted with the Calibrator ........................................................................... 8
Power Saver .............................................................................................................. 11
Zeroing with Absolute Pressure Modules ....................................................................... 11
Calibrating a P/I Transmitter ........................................................................................... 13
Using the Internal Pump ............................................................................................ 13
Using an Ex ernal Pumpt ............................................................................................ 17
External Fluke Pressure Module Compatibility ............................................................... 19
Switch Test ..................................................................................................................... 20
Maintenance ................................................................................................................... 20
In Case of Difficulty .................................................................................................... 21
Cleaning .................................................................................................................... 21
Cleaning the Pump Valve Assembly .......................................................................... 21
Calibration ................................................................................................................. 22


Product specificaties

Merk: Fluke
Categorie: Niet gecategoriseerd
Model: 718Ex
Ingebouwd display: Ja
Gewicht: 992 g
Breedte: 66 mm
Diepte: 94 mm
Hoogte: 216 mm
Nauwkeurigheid: 0.05 procent
Ondersteund aantal accu's/batterijen: 1
Temperatuur bij opslag: -40 - 60 °C
Levensduur batterij: 20 uur
Bedrijfstemperatuur (T-T): -10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 95 procent
Batterijtechnologie: Alkaline
Resolutie drukmeting: 0.1 bar
Meetbereik voor druk: -0.83 - 2 bar

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke 718Ex stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Fluke

Fluke

Fluke TiX885 Handleiding

7 December 2023
Fluke

Fluke TiX875 Handleiding

7 December 2023
Fluke

Fluke TiX880 Handleiding

7 December 2023
Fluke

Fluke TiX870 Handleiding

7 December 2023
Fluke

Fluke EI-162BN Handleiding

9 Augustus 2023
Fluke

Fluke CNX C3003 Handleiding

8 Augustus 2023
Fluke

Fluke 80i-2010s Handleiding

8 Augustus 2023
Fluke

Fluke TiS20+ Handleiding

8 Augustus 2023
Fluke

Fluke i1010 Handleiding

8 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd