Extech EC505 Handleiding

Bekijk gratis de handleiding van Extech EC505 (1 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.5 sterren uit 8 reviews. Heb je een vraag over Extech EC505 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EC505 pH Electrode

Installation Instructions

1. Turn meter power “off.”

2. Remove retaining collar holding probe on meter.

3. Pull, with a gentle “rocking” motion, to remove old probe.

4. Reverse order to install new probe. Do not touch contacts.

5. Before rst use or after extended storage, soak the electrode (with its cap removed) in a pH 4 solution for about

10 minutes. Rinse briey in deionized water.

Electrode Storage Instructions

Store in storage cap with sponge moistened with 4 buer or KCl solution.

Rinse in deionized water briey before use.

For further instructions, see instrument instruction manual.

This probe is compatible with: EC500 ExStik

®

Conductivity Meter

Contact Customer Support

Customer Support Telephone List: https://support.flir.com/contact

Calibration, Repair, and Returns: repair@extech.com

Technical Support: https://support.flir.com

Copyright © 2021 Teledyne FLIR LLC

All rights reserved including the right of reproduction in whole or in part in any form

www.extech.com

Product specificaties