Hikmicro Eco-Lite Handleiding
Pagina's 26 Meetapparatuur
Bekijk de handleiding van Hikmicro Eco-Lite gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Contact Us
Handheld
Thermal
Camera
User Manual
ECO Lite
Eco Lite User Manual
Safety Instruction
i
SAFETY INSTRUCTION
These instructions are intended to ensure that user can use the product correctly to avoid
danger or property loss. Please read all the safety information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure occurred,
you need to return the device to the factory with the original wrapper. Transportation
without the original wrapper may result in damage on the device and the company shall
not take any responsibilities.
DO NOT drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
ESD WARNING
The camera lens is electrostatic-sensitive. Proper ESD protection required. Avoid
touching the camera lens. Unauthorized contact may result in damage.
Power Supply
Input voltage should meet the Limited Power Source (5 VDC, 2 A) according to the
IEC62368 standard. Please refer to technical specifications for detailed information.
If a power adapter is provided in the device package, use the provided adapter only. If
no power adapter is provided, ensure the power adapter or other power supply
complies with Limited Power Source. Refer to the product label for the power supply
output parameters.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire
hazards caused by overload.
Use the power adapter provided by a qualified manufacturer. Refer to the product
specification for detailed power requirements.
Battery
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Replace with
the same or equivalent type only. Dispose of used batteries in conformance with the
instructions provided by the battery manufacturer.
Improper replacement of the battery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the
battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding environment,
which may result in an explosion or the leakage of flammable liquid or gas.
Eco Lite User Manual
Safety Instruction
ii
Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
Dispose of used batteries in conformance with the instructions provided by the battery
manufacturer.
The built-in battery cannot be dismantled. Please contact the manufacture for repair if
necessary.
For long-term storage of the battery, make sure it is fully charged every 3 months to
ensure the battery quality. Otherwise, damage may occur.
Use the battery provided by a qualified manufacturer. Refer to the product specification
for detailed battery requirements.
DO NOT charge other battery types with the supplied charger. Confirm there is no
flammable material within 2 m of the charger during charging.
DO NOT place the battery near heating or fire source. Avoid direct sunlight.
DO NOT swallow the battery to avoid chemical burns.
DO NOT place the battery in the reach of children.
When the device is powered off and the battery is full, the time settings can be kept for
60 days.
The standard adapter power supply is 5 V.
Maintenance
DO NOT maintain the camera when it is powered on, or it may cause electric shock! If
the product does not work properly, please contact your dealer or the nearest service
center. We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
Using Environment
Make sure the running environment meets the requirement of the device. The operating
temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and the operating humidity shall
be 95% or less.
This device can only be safely used in the region below 2000 meters above the sea
level.
Place the device in a dry and well-ventilated environment.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other bright light.
DO NOT aim the lens at the sun or any other bright light.
The device is suitable for indoor and outdoor uses, but do not expose it in wet
conditions.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug
Product specificaties
| Merk: | Hikmicro |
| Categorie: | Meetapparatuur |
| Model: | Eco-Lite |
Heb je hulp nodig?
Als je hulp nodig hebt met Hikmicro Eco-Lite stel dan hieronder een vraag en andere gebruikers zullen je antwoorden