EtherWAN EX75000 Handleiding

Bekijk gratis de handleiding van EtherWAN EX75000 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.0 sterren uit 4 reviews. Heb je een vraag over EtherWAN EX75000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright

©

2014 EtherWAN Systems, Inc. Page 1

All Rights Reserved

EX75000 rev. 1.0

12/2/2014

1 Unpacking

Unpack the items. Your package should include:

One EX75000 Series hardened managed

switch

Rack-mounting hardware brackets

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. Keep the cartonand

packing material.

2 What Else You Need

Appropriate cables for dataports

Personal computeror laptop

3 Selecta Location

Desktop installations: Mount ona flat table

or shelf surface.

Rack installations: Use a 19-inch (48.3-

centimeter) EIA standard equipment rack

that is grounded and physically secure.

Identifya power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Keep away from heat sources, sunlight, warm

air exhausts, hot-air vents, and heaters.

Be sure there is adequate airflow.

Keep the switch at least 6 ft.(1.83 m) away

from the nearest source of electromagnetic

noise, such as a photocopy machine.

4 Connect to the DataPorts

Your switch has the following ports:

24 10/100Base-TX Power over Ethernet (PoE)

ports

4 Gigabit ports

10/100Base-TXPoEPorts

Theswitch has 24 10/100Base-TX Power over

Ethernet (PoE) portsthatconform to IEEE802.3at

and provide up to 30W per port, with a total

power budget of 420W.

Theseports can connect todevices such as an IP

surveillance camera or a Voice Over Internet

Protocol (VoIP) phone.

A.Insert one end of acategory 5 or bettercable

into a switch port.

B.Connect the other end into the Ethernet port

of the device.

C.Repeat steps A and B for each additional

device you want to connect to the switch.

Gigabit Ports

This switch has 4 10/100/1000Base-TX ports,

1000Base-SX/LX/BX ports, or 1000BaseSFP ports.

You can connect these portsto network devices

such as a computer, printer, network video

recorder (NVR), network storage, or they can

connect to the network itself.

5 ApplyDC Power

The switch has a 48-57VDC terminal block:

+55VDC -55VDC

−0 -55

+ +550

Earth Ground

The switch also has a relay with thefollowing

settings:

SettingRelay Settings

Relay normalb c OPEN, c a CLOSE

Relay alarmb c CLOSE, c a OPEN

EX75000 Managed SwitchInstallation Guide

Continued on next page

Product specificaties