EtherWAN EX46910F Handleiding

Bekijk gratis de handleiding van EtherWAN EX46910F (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over EtherWAN EX46910F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright 2022 EtherWAN Systems, Inc.Page 1

All Rights Reserved

EX46910F

8/2/2022

EX46910F Hardened PoE Switch

Installation Guide

1 Unpacking

Unpack the items. Your package should

include:

One EX46910F PoE switch

Power input terminal block

Wall and DIN-Rail mounting hardware

brackets

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton

and packing material.

More information available at:

https://www.etherwan.com/us

For warranty information, visit:

https://www.etherwan.com/us/support/war

ranty-policy

2 Equipment Needed

Category 5e or better cable for RJ-45

ports

48VDC power supply with voltage

adjustable up to 56VDC and power output

to handle 240W PoE power budget.

3 Select a Location

DIN-rail installations: Attach the bracket

on the unit using the included screws and

then mount on a DIN-rail.

Wall installations: Attach the brackets on

the unit using the included screws and

then mount on a wall.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient

temperature between -40 and 75ºC (-40

and 167ºF).

Keep away from heat sources, sunlight,

warm air exhausts, hot-air vents, and

heaters.

Make sure there is adequate airflow.

4 Connect to the Ports

The EX46910F has the following ports:

8 10/100/1000 Mbps PoE ports

2 1000 Mbps SFP slots

10/100/1000BASE-T Ports

Ports 1 to 8 are gigabit copper ports that are

compliant with IEEE 802.3af/at PoE protocol,

with up to 30W power output per port.

SFP Slots

Ports 9 and 10 are 1000BASE SFP slots.

5 Connect Power

Terminal Block

Connect the unit to a suitable power supply

using appropriate wire, 18-24 AWG, rated for

105°C or higher.

Redundant power is supported. However,

only one power input is required to operate

the unit.

1.Connect power wires to the

appropriate P1+/- or P2+/- pins on

the terminal block.

2.Connect the grounding wire to the

ground screw.

3.Plug the terminal block into the

socket.

4.Alternatively, connect power 3 to an

external power adapter.

Relay Output Alarm

The switch provides relay output contacts for

redundant power. The relay output can be

connected to an alarm signaling device. The

current capacity is 1A@24VDC.

When dual power sources are connected,

the circuit is open.

When a single power source is connected

the circuit is closed.

The relay works with only power 1 and

power 2. It is not connected to power 3.

Product specificaties