EtherWAN EX29000 Handleiding

Bekijk gratis de handleiding van EtherWAN EX29000 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over EtherWAN EX29000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright

©

2014 EtherWAN Systems, Inc. Page 1

All Rights Reserved

EX29000 rev. 1.0

12/29/2014

1 Unpacking

Unpack the items. Your package should include:

One EX29000 Series switch

Rack-mounting hardware brackets

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. Keep the cartonand

packing material.

2 What Else You Need

Appropriate cables for dataports

Personal computer or laptop

3 Selecta Location

Desktop installations: Mount ona flat table

or shelf surface.

Rack installations: Use a 19-inch (48.3-

centimeter) EIA standard equipment rack

that is grounded and physically secure.

Identifya power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -10 and 60ºC (14 and 140ºF).

Keep away from heat sources, sunlight, warm

air exhausts, hot-air vents, and heaters.

Be sure there is adequate airflow.

Keep the switch at least 6 ft (1.83 m) away

from the nearest source of electromagnetic

noise, such as a photocopy machine.

4 Connect to the DataPorts

Depending on the model, your switch can have

the following ports:

0, 8, 16, or 24 10/100Base-TX ports

0, 4, 8, 12, 16, 20, or 24 100Base-FX ports

0, 2, or 4 Gigabit ports

10/100Base-TX and 100Base-FXPorts

Theseports can connect todevices such as an IP

surveillance camera or a Voice Over Internet

Protocol (VoIP) phone.

A.Insert one end of a Category 5 or better

Ethernet cable into a switch port.

B.Connect the other end into the Ethernet port

of the device.

C.Repeat steps A and B for each additional

device you want to connect to the switch.

Gigabit Ports

Gigabit ports come as 4-port 10/100/1000Base-

TX with Gigabit SFP socket combo, 4-port

1000Base-SX/LX/BX, or 2-port 10/100/1000Base-

TX with 2-port 1000Base-SX/LX/BX. These ports

can connect to network devices such as a

computer, printer, network video recorder

(NVR), network storage, or they can connect to

the network itself.

Wear an ESD-preventive wrist strap before

connecting to these ports.

Gigabit-SFP combo ports operate in “either/or”

fashion. This means that attaching to a 1 Gbps

SFP port renders the equivalent partner combo

port unavailable.

5 Apply AC Power

A.Connect the female end of the supplied AC

power adapter to the power receptacle on

the switch rear panel.

B.Connect the other end to a grounded 3-

pronged AC outlet.

Power-Up Sequence

When you apply AC power:

All

Link/ACTLEDs blink momentarily.

The

SystemLED goes ON.

LEDs for every port connected to a device

flash.

EX29000 SwitchInstallation Guide

Continued on next

page

Product specificaties