Tenda TEM2008D Handleiding

Bekijk gratis de handleiding van Tenda TEM2008D (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over Tenda TEM2008D of wil je andere gebruikers van dit product iets vragen? Stel een vraag

5/8-Port 2.5G Ethernet Switch

TEM2005D/TEM2008D

Quick Installation Guide

• Switch × 1

• Power adapter × 1

• Rubber feet pad × 4

• Screw

(thread diameter: 3 mm, length: 14 mm, head diameter: 5.2 mm) × 2

• Plastic anchor

(height: 6.6 mm, inner diameter: 2.4 mm, length: 26.4mm) × 2

• Quick installation guide

Package contents

The switch supports auto MDI/MDIX. You can use either a straight through cable or

a crossover cable to connect the switch to Ethernet devices.

Tips:

Preparations

Installation

− Desktop mounting: ESD bracelet or gloves

− Wall mounting: ESD bracelet or gloves, ladder, screwdriver,

marker, hammer drill, rubber hammer, spirit level

For technical specifications, user guides, Symbols on Products and

Materials and more information, please visit the product page or

service page on www.tendacn.com. Multiple languages are available.

You can see the product name and model on the product label.

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications to this equipment. (2) To avoid unnecessary

radiation interference, it is recommended to use a shielded RJ45 cable.

Before operating, read the operation instructions and precautions to

be taken, and follow them to prevent accidents. The warning and

danger items in other documents do not cover all the safety

precautions that must be followed. They are only supplementary

information, and the installation and maintenance personnel need to

understand the basic safety precautions to be taken.

− For wall mounting, the device is only suitable for mounting at

heights ≤ 2 m.

− Operating environment: Temperature: 0°C - 40°C (32°F - 104°F);

Humidity: (10% - 90%) RH, non-condensing; Storage environ-

ment: Temperature: -40°C - 70°C (-40°F - 158°F); Humidity: (5%

- 90%) RH, non-condensing.

− The mains plug is used as the disconnect device and shall remain

readily operable.

− The power socket shall be installed near the device and easily

accessible.

− Only use attachments/accessories specified by the manufacturer.

− Do not block any ventilation openings.

− Keep the device away from water, heat sources, high electric field,

high magnetic field, and inflammable and explosive items.

− Keep the operating environment clean. Remove dust from the

device regularly. Cut power before cleaning.

− Ensure proper grounding before device operation. Refer to the

Lightning Protection Guide on the official website for guidance.

− During installation, do not wear conductive items (such as a watch,

or hand chain).

− Disassembling or modifying the device or its accessories without

authorization voids the warranty, and might cause safety hazards.

− If such phenomena as smoke, abnormal sound or smell appear

when you use the device, immediately stop using it and disconnect

its power supply, unplug all connected cables, and contact the

after-sales service personnel.

− Disconnect the power source during servicing.

− Refer all servicing to qualified service personnel.

− The device’s marking information can be found on its surface.

For the latest safety precautions, see Safety and Regulatory

Informationwww.tendacn.com on

This is a Class A product.

Warning: Operation of this equipment in a residential environment could cause

radio interference. In which case the user may be required to take adequate

measures.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications to this equipment. (2) To avoid

unnecessary radiation interference, it is recommended to use a shielded RJ45

cable.

Declaration of Conformity

Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the device

(Switch) is in compliance with directives 2014/35/EU and 2014/30/EU.

The full text of the EU Declaration of Conformity is available at the following

internet address: https://www.tendacn.com/download/list-9.html

This product bears the selective sorting symbol for Waste Electrical and

Electronic Equipment (WEEE). This means that this product must be handled

pursuant to European directive 2012/19/EU in order to be recycled or

dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or

to the retailer when he buys a new electrical or electronic equipment.

Shenzhen Tenda Technology Co., Ltd.

Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,

Shenzhen, China. 518052

Website: www.tendacn.com

E-mail: support@tenda.cn

support.usa@tenda.cn (North America)

support.uk@tenda.cn (United Kingdom)

Copyright© 2026 Shenzhen Tenda Technology Co., Ltd. All rights reserved.

Tenda is a registered trademark legally held by Shenzhen Tenda Technology

Co., Ltd. Other brand and product names mentioned herein are trademarks or

registered trademarks of their respective holders. Specifications are subject to

change without notice.

https://www.tendacn.com/service/default.html

Paste the four rubber feet pads to the four recesses on the

bottom of the switch. Horizontally place the switch right-side up

on a big enough, clean, stable and flat desktop.

Example: TEM2005D

Example: TEM2005D

Q1. The power indicator (Power) does not light up. What

should I do?

− Ensure that the power adapter is connected to the switch and the

power socket properly.

− Ensure that the power socket is supplying power normally.

− Ensure that the input voltage matches the value required by the

switch.

Q2: The Link/Act indicator of the switch is off. What should I do?

− Ensure that the switch is powered on.

− Ensure the connected device is powered on and working properly.

− Ensure that the Ethernet cable between the switch and the

attached device is connected properly.

− Ensure that the Ethernet cable is not damaged, and meets the

specification requirements.

- This switch can only be installed on non-flammable walls, such as a concrete wall.

- Do install the switch with its air vents facing downward. Otherwise, there will NOT

be potential safety hazards.

Desktop mounting

1. Mark your wall for the wall-mounting slots on the bottom of the

switch (distance between two holes: 70 mm for TEM2005D,

130 mm for TEM2008D) and drill two holes (diameter: 6 mm)

horizontally.

2. Hammer plastic anchors into the holes.

3. Insert screws into the plastic anchors, leaving a gap (at least

2.5 mm) between the screw heads and plastic anchors.

4. Place the switch on the screws and slide it down until it locks

into place.

Wall mounting

TEM2005D is used for illustrations here unless otherwise specified.

The actual product prevails.

Rubber feet pad

Install the device

Typical network topology

Get support and services

FCC statement

Safety precautions

RECYCLING

CE mark warning

Technical support

V1.0 Keep for future reference.

Indicators and ports

FAQ

Note:

Indicatot/SlotDescription

Solid on: The switch is powered on.

Off: The switch is powered off.

➊ Indicator

➋ RJ45 port

➌ Anti-theft slot

➍ Power jack

➎ Ground terminal

Power

1G/100M

2.5G

Tips :

➊

Solid on: The port is connected.

Blinking: Data is being transmitted over the port.

Off: The port is disconnected.

Used with a lock (not provided) to secure the switch to a

fixed object.

1G/100M: Yellow light indicates a negotiation rate of

1Gbps or 100Mbps.

2.5G: Green light indicates a negotiation rate of 2.5Gbps.

Distance between two holes

Diameter 6 mm

Plastic anchor

Screw

Wall-mounting

slot

2.5mm

➋

➍

➌➎

12

345

Internet

Power socket

Switch

(Example: TEM2005D)

LAN portWAN

port

Router

ComputerNAS

IP camera

Example: TEM2005D

Product specificaties