EtherWAN ER58000 Handleiding

Bekijk gratis de handleiding van EtherWAN ER58000 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 4.3 sterren uit 3 reviews. Heb je een vraag over EtherWAN ER58000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright 2014 EtherWAN Systems, Inc. Page 1

All Rights Reserved

ER58000 rev. 1.0

12/2/2014

1 Unpacking

Unpack the items. Your package should include:

One ER58000 Series hardened managed

switch

Rack-mounting hardware brackets

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton and

packing material.

2 What Else You Need

Appropriate cables for data ports

Personal computer or laptop

3 Select a Location

Desktop installations: Mount on a flat table

or shelf surface.

Rack installations: Use a 19-inch (48.3-

centimeter) EIA standard equipment rack

that is grounded and physically secure.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Be sure there is adequate airflow.

4 Connect to the Data Ports

Your switch has the following ports:

8 10/100Base-M12 D-Code 4-pin female ports

2 Gigabit-M12 A-Code 8-pin female/LC ports

10/100Base-M12 Ports

These ports support Power over Ethernet (PoE).

They conform to IEEE802.3at and provide up to

30W per port, with a total power budget of

120W. Use these ports to connect to devices such

as an IP surveillance camera or a Voice Over

Internet Protocol (VoIP) phone.

Gigabit-M12 Ports

These ports come as 10/100/1000Base-TX,

1000Base-SX, or 1000Base-LX interfaces.

These ports can connect to network devices such

as a computer, printer, network video recorder

(NVR), network storage, or they can connect to

the network itself. Wear an ESD-preventive wrist

strap before connecting to these ports.

5 Apply DC Power

The switch supports two sets of power supplies —

power input 1 and power input 2.The M23 6-pin

male connector on the front panel is used for the

dual power inputs. Use a power cord with an M23

6-pin female connector to connect the power

inputs to the switch.

Pin

Description

Power 2



24-48VDC



Power Ground

Power 1



24-48VDC



Power Ground

Earth Ground

Relay Output Rating

1A @ 250VAC

Pin

Description

1

PWR1 Live / DC + (24-48VDC)

2

PWR1 Neutral / DC -

3

Chassis Ground

4

PWR2 Neutral / DC -

5

PWR2 Live / DC + (24-48VDC)

ER58000 Series Hardened Managed Ethernet Switch

Installation Guide

Continued on next page

Product specificaties