Eliminator Lighting Katana LED Handleiding

Bekijk gratis de handleiding van Eliminator Lighting Katana LED (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.3 sterren uit 8 reviews. Heb je een vraag over Eliminator Lighting Katana LED of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Katana LED

SPECIFICATIONS:

Model: Katana LED

Supply Voltage: 100V~230V / 50~60Hz

LEDs: 4 x 3W (1 Red, 1 Blue, 1

Green & 1 White)

Power Consumption: 36W

Beam Angle: 123 Degrees

Weight: 5 lbs./ 2.0 kgs

Size: 9.5”L x 6.75”W x 6.5”H

Fuse: 1 Amp

Working Position: Any Safe position

Duty Cycle: None

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and understand these instructions before installing or operating this unit.

Introduction:

The Katana LED is a powerful effect for clubs and dj’s. The Katana LED is bright, colorful, moonflow-

er effect. This unit features an internal microphone that allows the beams to be triggered by sound.

The Katana LED’s beams rotate and strobe to the beat of the music. The Katana LED is ready to

be hung or set on the ground in a safe position. When mounting this unit to truss be sure to use a

clamp.

Fuse Replacement:

Caution! Never open unit when in use. Always disconnect main power before servcing. Remember to

always replace with the exact same type fuse. Locate and remove the unit’s power cord. Once the cord

has been removed located the fuse holder located inside the power socket. Insert a flat-head screw

driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with

a new one. The fuse holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse

with active fuse.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

1 Year Limited Warranty:Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Product specificaties