Eliminator Lighting Flash 192 Handleiding

Bekijk gratis de handleiding van Eliminator Lighting Flash 192 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Eliminator Lighting Flash 192 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Flash 192

SPECIFICATIONS:

Model: Flash 192

Voltage: 100V-230V 50/60Hz

LEDs: 192 x 0.06W

Beam Angle: 60 Degrees

Power Consumption: 15W

Weight: 3.59lbs./ 1.63kgs.

Size: 11”(L) x 7.87”(W) x

2.36”(H) (w/o Bracket)

11”(L) x 7.87”(W) x

7.87”(H) (w/ Bracket)

Fuse: 1 Amp

Power Cord Daisy Chain: 25 Fixtures Max.

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4 DMX Channels

Colors: White

Warranty: 1 Year

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

The Flash 192 has been tested at the factory, there is no assembly required. The unit is ready to be

plugged into a power outlet. This unit is a 4 channel DMX intelligent strobe. It has 3 operating mode;

Manual mode, Sound Active, or DMX mode. The Flash 192 can be used as a stand alone unit or in a

master-slave conguration.

Fuse Replacement:Disconnect the unit from its power source. Remove the power cord from the

unit. Once the cord has been removed, you will nd that the fuse holder is located inside the power

socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder.

Remove the bad fuse and replace with a new one. The fuse holder also has a holder for a spare fuse.

Power Cord Daisy Chaining: With this feature you can connect the xtures to one another using the

IEC input and output sockets. The quantity that can be connected is 25 xtures maximum. After 25

xtures you will need to use a new power outlet. They must be the same xtures. DO NOT mix xtures.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always

disconnect main power before replacing fuse.

Remember to always replace with the exact same

type fuse.

Product specificaties