Eliminator Lighting Electro Disc LED Handleiding

Bekijk gratis de handleiding van Eliminator Lighting Electro Disc LED (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over Eliminator Lighting Electro Disc LED of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Electro

Disc LED

SPECIFICATIONS:

Model: Electro Disc LED

Voltage: 100V-240V 50/60Hz

LEDs: 107 x 10mm LEDs (36

Red, 36 Green, & 35 Blue)

Beam Angle: 30 Degrees

Power Consumption: 14W

Weight: 3lbs./ 1.2kgs.

Size: 10.25”(L) x 9.5”(W) x 4”(H)

Fuse: 1 Amp

Power Cord Daisy Chain: 40 Fixtures Max.

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4 DMX Channels

Colors: Multiple Colors

Warranty: 1 Year

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

The Electro Disc LED has been tested at the factory, there is no assembly required. The unit is ready

to be plugged into a power outlet. This unit is a 4 channel DMX intelligent LED wash. It has 6 oper-

ating modes; Static Color mode, Color Change mode, Color Fade mode, Auto Run mode, Sound

Active mode, or DMX mode. The Electro Disc LED can be used as a stand alone unit or in a master-

slave conguration.

Power Cord Daisy Chaining: With this feature you can connect the xtures to one another using the

IEC input and output sockets. The quantity that can be connected is 40 xtures maximum. After 40

xtures you will need to use a new power outlet. They must be the same xtures. DO NOT mix xtures.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always

disconnect main power before replacing fuse.

Remember to always replace with the exact same

type fuse.

1 Year Limited Warranty:Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Product specificaties