Danfoss SonoSelect 10 Handleiding
Danfoss
Meetapparatuur
SonoSelect 10
Bekijk gratis de handleiding van Danfoss SonoSelect 10 (38 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.6 sterren uit 25.5 reviews. Heb je een vraag over Danfoss SonoSelect 10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/38
2 01.02.00 © Danfoss| Energy Meters| 2018.02|
1 Basic information 4 ....................................................................................................
1.1 The physical layer ............................................................................................. 4
1.2 Wake up process and baud rate changes (IR) ....................................................... 4
1.3 Baud rate changes 4 ............................................................................................
1.3.1 Wait time before reply after correct message reception .................................... 5
1.4 Data Link layer (DLL) ......................................................................................... 5
1.4.1 C field (Control field, Function fiel Field size 1 byte d) – ................................... 5
1.4.2 A Field (Address Field) 1 byte 6 –....................................................................
1.4.3 L Field 2 fields with a size of 1 byte –............................................................ 7
1.4.4 CS field 1 byte –......................................................................................... 7
1.5 Combined Transportation and application layer ..................................................... 8
1.5 CI Field (Control information field) .1 ................................................................ 8
1.5.2 Long header ............................................................................................... 9
1.5.3 Status byte and error handling ................................................................... 10
1.5.4 DIF & VIF configuration of data records ........................................................ 11
1.6 The standard read out ..................................................................................... 13
2 Communication process ......................................................................................... 16
2.1 M-Bus EN 13757 data frames ........................................................................... 16
2.2 Pulse readout . ................................................................................................ 17
2.3 Application reset ............................................................................................. 17
2.4 Send/Confirm procedures available using the Danfoss Meter ................................. 21
2.4.1 SND_NKE ................................................................................................. 21
2.4.2 SND_UD .................................................................................................. 22
2.4.3 REQ_UD2 ................................................................................................. 34
2.4.4 RSP_UD ................................................................................................... 35
Annex A ..................................................................................................................... 36
3 01.02.00 © Danfoss| Energy Meters| 2018.02|
Identify the needed telegrams from the EN13757 standard and determine how to implement
the SonoSelect 10 and SonoSafe 10 communication protocol into an M-Bus telegram. This
document contains the description the M-Bus protocol implemented for SonoSelect 10 and
SonoSafe 10. The M-Bus protocol will follow the EN13757 standard.
According to the software architecture of the SonoSelect 10 and SonoSafe 10 the
communication shall be split into three layers.
Figure 1 - OSI model and architecture of HM
The M-Bus protocol for the IR and Wired communication will be identical and therefore these
two components will share the same data-link and application layer. The M-Bus will only
support physical, data-link and combined transportation and application layer. The other layers
stated in EN13757-3 are optional and will not be part the wired M-Bus implementation of the
SonoSelect 10 and SonoSafe 10. According to the EN13757-1 standard the transportation layer
must be handled in an Application Layer.
Product specificaties
| Merk: | Danfoss |
| Categorie: | Meetapparatuur |
| Model: | SonoSelect 10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Danfoss SonoSelect 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur Danfoss
29 Juni 2023
18 Mei 2023
9 Mei 2023
27 April 2023
24 April 2023
5 April 2023
Handleiding Meetapparatuur
- Innoliving
- BAXTER
- Milesight
- Techno Line
- TFA
- Tru Components
- Aeros
- Motrona
- Johnson Level
- Maximum
- HT Instruments
- Kemo
- Arya
- Vimar
- Kübler
Nieuwste handleidingen voor Meetapparatuur
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025