Azden SGM-3416L Handleiding

Azden Microfoon SGM-3416L

Lees hieronder de 📖 handleiding in het Nederlandse voor Azden SGM-3416L (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

SGM 3416/3416L-

BROADCAST SPEC SHOTGUN MICROPHONE-

OPERATING MANUAL

Thank you for purchasing the Azden SGM 3416/3416L broadcast spec shotgun microphone. Designed for - -

video and audio professionals, the SGM 3416/3416L is a super direconal electret condenser microphone - -

with a wide frequency response and ultra low noise levels. Each SGM 3416/3416L is tested before leav-- -

ing the factory and accompanied by its own frequency response chart.

POWER

The SGM 3416/3416L is powered by external Phantom Power. To power the unit, connect an XLR cable -

(not included) to the microphone with a voltage source that supplies between 11 and 52 VDC.

MIC OUTPUT

The SGM 3416/3416L has a balanced 3 pin XLR output and will work in any impedance microphone input - -

of 1K ohm or less. Due to the wide variety of possible connecons and equipment used with the SGM-

3416/3416L, an output cable is not supplied.

WIRELESS OPTION

The SGM 3416/3416L can be turned into a wireless microphone by purchasing one of Azden’s unique XLR -

plug in transmiers and matching receiver. For more details, contact your Azden dealer or visit our web--

site at www.azdencorp.com

SHOCK MOUNT HOLDER-

The SGM 3416/3416L is supplied with a shock mount holder and a replacement boom plate for boom - -

pole/tripod. Push the barrel into the clips unl it is secured. To secure the holder to a camera shoe, slide

the older into the camera shoe and ghten the thumb wheel by turning it clockwise unl it is ght. To

mount the SGM 3416/3416L onto a boom pole or tripod, replace the boom plate of the shock mount - -

holder with the supplied boom plate with a 3/8” threaded hole and screw the holder to a boom pole/

tripod by turning it clockwise.

Balanced 3 pin XLR output-

Shield

Cold

Hot

180/247mm

SPECIFICATIONS

SGM-3416

Type: Electret condenser

Frequency response: —20,000Hz 40

Sensivity: Uni direconal, 33dB at 1kHz (0dB=1V/Pa) - -

Impedance: 120Ω at 1kHz

Max SPL input level: 115dB SPL (1kHz at 1% T.H.D)

Signal to noise rao: 78dB (1kHz at 1Pa)

Power source: Phantom DC 11 -52V

Weight: 125g (4.4oz)

Dimensions: ɸ19mm x 180mm (ɸ3/4” x 7”)

Connector: Balanced 3 pin XLR -

SGM-3416L

Type: Electret condenser

Frequency response: —20,000Hz 40

Sensivity: Uni direconal, 33dB at 1kHz (0dB=1V/Pa) - -

Impedance: 120Ω at 1kHz

Max SPL input level: 115dB SPL (1kHz at 1% T.H.D)

Signal to noise rao: 78dB (1kHz at 1Pa)

Power source: Phantom DC 11 -52V

Weight: 160g (5.64oz)

Dimensions: ɸ19mm x 247mm (ɸ3/4” x 9 3/4”)

Connector: Balanced 3 pin XLR -

FREQUENCY RESPONSE

POLAR PATTERN

FREQUENCY RESPONSE

POLAR PATTERN

Product specificaties

Merk:	Azden
Categorie:	Microfoon
Model:	SGM-3416L
Kleur van het product:	Zwart
Soort:	Microfoon voor interviews
Connectiviteitstechnologie:	Bedraad
Diameter:	19 mm
Aansluiting:	mini XLR (3-pin)
Stroomverbruik:	2.5 mA
Signaal/ruis-verhouding:	82 dB
Gevoeligheid microfoon:	-33 dB
Operating voltage:	52 V
Frequentie microfoon:	30 - 20000 Hz
Microphone input impedance:	130 Ohm
Gewicht microfoon:	170 g
Afmetingen microfoon (DxH):	19 x 247 mm