Optogate PB-09 Handleiding


Pagina's 1 Microfoon

Bekijk de handleiding van Optogate PB-09 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag

User manual for the Optogate models PB-09
No time for manuals? No problem, this will take only 3 minutes of your time to read it and you will have more fun and
success with your new Optogate device.
The PB-09 is a mic table stand with an implemented „Mic on“ button and the Optogate function. It works with 48V
Phantom power. The Phantom power passes the mic. The current consumption is 3,8 mA
Optogate function: You can see the 2 lenses on the frontside. These are the infrared transmitter and the receiver. You
can enable the optical function when you switch on the dip switch 1 (mode 1) on the right side under the face plate. The
Optogate will switch on the mic if somebody is in front of it and will switch off the mic if nobody is present anymore. The
potentiometer inside. The distance will increase by turning the pot to the right until the maximum distance of about 4
feet. When you start to turn the pot clockwise, you will find that the distance range will change very slowly in the first few
turns. After a few turns, the distance will change more rapidly until you reach the maximum range. If you turn the
potentiometer clockwise (right) out of the useable area, the mic will be switched on completely. If this happens,
just turn the pot slightly to the left until the Optogate works again. The maximum distance depends from the
following circumstances:
1.) Please aware that some dark materials are not able to The color and material of the reflection surface.
reflect infrared signals very well, which might decrease the distance. As a rule the closer the
speaker is on to the mic, the better the results. The usuable angle in front of the PB-09 is 15 degree.
2.) Like every other infrared device on the market the Optogate units doesn´t workChanging of ambient light.
correctly if direct sunlight or other very high power infrared signals hits the sensor. That is in the "nature"
of the infrared technology due to the high power random infrared spectrum in the sunlight. You can try it
with your remote control of your home sound system. No infrared sensor of CD-players, TV’s etc. will
work in direct sunlight. If direct sunlight hits the Optogate sensor, the trigger distance will change until
the mic will be switched on. The unit will work again if somebody moves between the sun and the
sensor. Normally you can use the Optogates on almost every open-air stage without any problems. It is
always a good idea to check the range of your Optogates together with the performer when changing
venues, especially outdoors with direct sunlight.
Button functions: The button will be enabled by switching on the dip switch 3. Two different modes are possible: The
„Push To Talk“ mode is active when the dip switch 2 is in the „off“ position and the mic is switched on only when the
button is pressed. The other mode is the „Mic Latch“ function and is enabled when the dip switch 2 is on. One push on
the button will switch on the mic and the next push will switch off the mic. Dip switches 4 a 5 need to be in „on“ position if
implemented.
The Optogate devices were developed for use with professional equipment and should be used by professional trained
system engineers and operators only . Please be aware that we are not responsible for any hazards, damages or
disadvantages due to the use of the Optogate devices. The Optogate devices are registered under the number
DE54933725 WEEE as B2B devices. We also declare that they conform to the CE and ROHS for the European market.
Please don’t hesitate to contact us atif you have further questions: [email protected]

Beoordeel deze handleiding


Product specificaties

Merk: Optogate
Categorie: Microfoon
Model: PB-09

Heb je hulp nodig?

Als je hulp nodig hebt met Optogate PB-09 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden