Azden 1201XT Handleiding

Bekijk gratis de handleiding van Azden 1201XT (8 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 49 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Azden 1201XT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User’s Guide

1201URX/AB • 1201URX/VM • 1201URX/Si/Si-S

1201BT • 1201XT

ENHANCED BROADCAST PERFORMANCE

UHF WIRELESS SYSTEM

1201URX/AB - 1201URX/Si - 1201URX/VM/Si-S

RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz

MicroComputer Controlled PLL Synth.

Noise Reduction Expander (THAT)

Effective Operating Range 200 - 300 ft ~ 60 - 100m

Frequency Response 50 - 15kHz (± 1.5dB)

RF Sensitivity (12dB SINAD) 1.2μV

Adjacent Channel Selectivity > 70dB (± 250kHz)

Image Rejection > 93dB

IF Rejection > 93dB

Audio THD < 0.8%

Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1201URX\Si)

Output Impedance 600Ω (300Ω for 1201URX\Si)

Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted

Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1201URX\Si)

Dimensions 68W x 84H x 18D mm- 1201URX/Si insertion

93W x 119H x 49D mm - 1201URX/AB

82W x 150H x 60D mm - 1201URX/VM

Operating Temperature Range -500 - +1220 F ~ -100 - +500 C

Weight 8.8 ounces ~ 250g for 1201URX/Si

15.87ounces ~ 450g for 1201URX/AB

26.45ounces ~ 750g for 1201URX/VM

1201BT

Output Power 30mW

Max Modulation Sensitivity -4dBm

MIC Level / Imped. -56dBm (± 5kHz Deviation)

Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA

Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches

63 (W) x 98 (H) x 28.5 (D) mm

Weight w/Battery 6.35 ounces ~ 180g

1201XT

Output Power 30mW

Max Modulation Sensitivity +20dBM ~ 0dBm

MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ (± 5kHz Dev.)

Phantom Power 48V ±2V @ 2mA

Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON

Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches

40 (W) x 114 (H) x 40 (D) mm

Weight w/Battery 6.35 ounces ~ 180g

Due to constant improvements, specications are subject to change without notice.

Licensing

Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classication, applica-

tion and frequency. Contact the appropriate agency (FCC in the USA) for further information.

SPECIFICATIONS

Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010

tel - 516.328.7500 • fax - 516.328.7506 • email - sales@azdencorp.com

© 2010 Azden Corporation Printed in USA P1030-02

Product specificaties