Azden SGM-3500L Handleiding

Azden Microfoon SGM-3500L

Lees hieronder de đź“– handleiding in het Nederlandse voor Azden SGM-3500L (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
REGISTER FOR YOUR
10 YEAR WARRANTY
Congratulations on your purchase of the Azden SGM-3500 or
SGM-3500L Broadcast Spec Shotgun Microphone.
All Azden products come with a two (2) year limited warranty. The
warranty for the this microphone may be extended to ten (10)
years.
To obtain your 10 year warranty, please register your microphone
online at www.azden.com/warranty* within 90 days from the date of
purchase.
*Azden’s 10 year warranty is not available in all countries and not
all Azden products are eligible. See www.azden.com for details.
Azden Two Year Limited Warranty
Azden Corporation warrants, to the first purchaser, that the Azden brand
product purchased is free from defects in material and workmanship.
Azden’s sole obligation under this warranty shall be to provide, without
charge, repair or replacement (at Azden’s sole discretion), within two years
from the date of purchase. A dated receipt is required to establish the date of
purchase and no registration is necessary to receive warranty service under
this two year limited warranty. The cost to ship a failed product to and from
Azden or to its dealer shall not be covered by this warranty.
This warranty is the sole and exclusive express warranty given with respect
to the product and all other warranties, expressed or implied, are herby
excluded. Neither Azden, nor the dealer who sells this product, is responsible
for indirect, incidental or consequential damages.
This warranty does not extend to any defect, malfunction or failure caused by
misuse, abuse, accident, act of God, faulty hookup, unauthorized
modification, connecting this product to equipment for which this product is
not intended or defective associated equipment.
Customers in the Asia and Oceania markets contact:
Azden Corp., 1-12-17 Kamirenjaku Mitaka-shi, Tokyo, 181-8533 Japan
Tel: +81-422-55-5115 (Japan) • Fax: +81-422-55-0131 (Japan)
www.azden.co.jp • email: sales@azden.co.jp
Customers in the North/South America and European markets contact:
Azden Corp., 200 Valley Road, Suite 101, Mt. Arlington, NJ 07856
Tel: +1-973-810-3070 • Fax: +1-973-810-3076
www.azden.com • email: sales@azden.com
Thank you for purchasing the SGM-3500 or SGM-3500L Broadcast
Spec Shotgun Microphone. Designed for video and audio
professionals, the SGM-3500 and 3500L microphones are
condenser microphones with supercardioid and hypercardioid polar
patterns, respectively, a wide frequency response and ultra-low
noise levels. Each microphone is tested before leaving the factory
and is accompanied by its own unique frequency response chart.
Microphone Output
The SGM-3500 and SGM-3500L microphones have a balanced
3-pin XLR output that is designed to work with a standard XLR
microphone input. The contacts of this output are gold plated for
optimal connectivity and resistance to corrosion. Any standard,
balanced XLR microphone cable can be used for connecting this
microphone to other equipment (sold separately).
Phantom Power
The SGM-3500 and SGM-3500L microphones require phantom
power in order to work. Phantom power is a DC voltage supplied
through a balanced microphone cable and used to power the
electronics of the connected microphone. Most professional
cameras, mixers and audio interfaces with microphone XLR
preamps have the ability to supply phantom power. If the equipment
you use does not, you will have to utilize a separate external
phantom power supply.
Most commonly, phantom power is supplied at 48 V. This is the
optimal voltage for the SGM-3500 and SGM-3500L microphones. It
is possible that your connected equipment supplies a different
voltage. This microphone is rated to work on a voltage between 44
and 52 V, however, performance will degrade with lower voltages
and damage to the electronics could result when using voltages in
excess of this range. It is recommended that you consult the
manuals of any equipment you intend to use with this microphone
beforehand. Please note that the warranty does not cover damage
caused by using phantom power beyond what the microphone is
rated for.
Microphone Clip
The included microphone clip is designed to fit either the
SGM-3500 or SGM-3500L snuggly, and has a 5/8” threaded hole
on the bottom which will fit USA standard microphone boom poles.
Also included is a thread adapter for fitting to boom poles with a 3/8”
thread European standard pole. The clip can articulate to adjust for
the proper angle when booming.
Accessories
Specifications
Mic Element: Condenser
Freq. Response: 40 Hz – 20 kHz
Polar Pattern: 3500: Supercardioid
3500L: Hypercardioid
Sensitivity: 3500: -31 dB
3500L: -28 dB
at 1 kHz (0 dB = 1 V/Pa)
Dynamic Range: 118 dB
Impedance: 120 Ω (at 1 kHz)
Max Input SPL: 130 dB SPL (1 kHz at 1% T.H.D.)
S/N Ratio: 82 dB (1 kHz at 1 Pa)
Power Requirement: 48 V DC Phantom (±4 V )
Connector: 3-pin XLR
Dimensions: 3500: 180 mm x φ19 mm (7.08” x φ0.75”)
3500L: 247 mm x φ19 mm (9.72” x φ0.75”)
Weight: 3500: 140 g (5.0 oz)
3500L: 170 g (6.0 oz)
Accessories: hard shell case, mic clip, windscreen
Frequency Response
Polar Pattern
SGM-3500 SGM-3500L
Features
The SGM-3500 and SGM-3500L microphones adhere to Azden’s highest
engineering and performance standards to satisfy the needs of even the
most fastidious audio and video professionals.
• SGM-3500: supercardioid polar pattern offers directional sound pickup
with side noise rejection, achieved with short length interference tube for
increased mobility
• SGM-3500L: longer interference tube creates hypercardioid polar pattern
for more extreme directional sound pickup and side noise rejection, better
isolation and distance performance
• Condenser microphone element utilizes Azden’s latest in engineering
techniques to achieve the highest possible performance
• Wide dynamic range and frequency response
• Boosted response in high frequencies for speech articulation
• Extremely low self-noise levels for crystal clear audio
• All metal, brass body provides optimal RF rejection and durability
• Gold-plated XLR connector for optimal connection and resistance to
corrosion
• Comes with hard shell plastic case with custom foam, mic clip and
high-density foam windscreen
shield hot
cold
1 2
3
XLR pin assignments
CAUTION
Do not attempt to open the casing or make any modification to the internal
electrical components. Electric shock or injury may result. Any unauthorized
modification to this product will void all applicable warranties.
Do not store or operate this product near a heat source or in an environment of
extreme temperatures. Avoid exposure to rain or any other source of moisture. Do
not submerge in water. If exterior is exposed to water, wipe dry before use.
Please take the time to read this manual carefully and keep it for your reference.
Windshield (SGM-3500) Windshield (SGM-3500L)
Hard shell case Microphone Clip


Product specificaties

Merk: Azden
Categorie: Microfoon
Model: SGM-3500L

Heb je hulp nodig?

Als je hulp nodig hebt met Azden SGM-3500L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Azden

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon