Atdec AF-M Handleiding

Atdec Niet gecategoriseerd AF-M

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AF-M (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

AF-M Page 1 of 4

COMPONENT CHECKLIST

Cable Clip

(x1)

Pole

Top Cap

(x1)

Bolt Through

Base

(x1)

2mm

Allen key

(x1)

5mm

Allen key

(x1)

Security Screw

M4 x 16mm

(x1)

Mounting

screws

M4 x 10mm

(x4)

Mounting

screws

M4 x 12mm

(x4)

Mounting

screws

M4 x 16mm

(x4)

Desk clamp

assembly

(x1)

Screw

M8 x 60mm

(x1)

Screw

M8 x 30mm

(x1)

Steel

Washer

(x1)

Cable

Stops

(x2)

Pole

Assembly

(x1)

VESA

head

(x1)

Installation Guide

AF-M

Micro Desktop Monitor Mount

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

REQUIRED TOOLS

WEIGHT RANGE

• Power Drill

• Drill Bit

• Phillips Head Screwdriver

0 - 8kg

(0 - 17.6lbs)

AF-M Page 2 of 4

1. Desk overview

The desk clamp bracket

can be repositioned to

suit different mounting

surface thicknesses.

1.1 1.2 Default Inverted

2. How to reconfigure desk clamp

2.1 Remove screws

(M8 x 16mm Countersunk screw)

2.2 Remove clamp plate Invert bracket Replace clamp plate Reattach bracket2.3 2.4 2.5

Pressure Plate

M10 Desk Clamp Screw

5mm Allen Key

M8 x 30mm

Countersunk

screw Tighten

firmly

3.2 Place in desired location Screw pressure plates in and .3.3 tighten firmly3.1 Attach clamp to post

Drill 9mm hole in

desired post position

on work surface.

3. Post mount configuration

4. Bolt through

9mm

(3/8”)

25mm

offset

MIN THICKNESS - 0mm (0”)

MAX THICKNESS - 39mm (1.5”)

MIN THICKNESS - 35mm (1.4”)

MAX THICKNESS - 76mm (3”)

5. Installing bolt through

5.1 Attach plate to post

Align rear hole with

hole on desk

5mm

Allen Key

M8x60mm

Screw

Bolt

Through

Plate

AF-M Page 3 of 4

6. Install VESA monitor head

Optional Spacers (may be

required for recessed and

uneven surfaces)

VESA monitor

head

Screen

M4x10/12/16mm

Phillips Head Mounting

Screws

6.1 Install VESA monitor head as shown. 100mm

100mm

7. Mounting Monitor

8. Unlock/Lock Arm Rotation (Note: Focus Micro comes assembled in the “Locked” Position.)

Pole

2mm Allen Key

Grub ScrewMicro Arm

2mm Allen Key

Grub Screw

Grub Screw Hole

Slot in Pole

VESA monitor head

Arm Assembly

7.2 OPTIONAL SECURITY SCREW

Ensure the Monitor is supported, then loosen the Monitor head

screw with the 5mm Allen Key and tilt screen up before installing

the M4 x 16mm Security Screw into the Security Screw hole

Note: Support Screen

when adjusting tilt.

7.1 Insert VESA monitor head into the

receptacle in the Arm Assembly

Unlock

If you wish your Focus Micro Arm to have 360º rotation

about the Pole you will need to unlock the arm’s rotation

Step 1: Unlock the arm by turning the Grub Screw

anti-clockwise removing the Grub Screw completely

Note: Store the Grub Screw in a safe place if you are to

return the arm to the Locked position

Lock

If you have unlocked your Focus Micro Arm, but wish to

fix rotation around the Pole, you will need to lock the arm

Step 1: Ensure the hole for the Grub Screw in the Micro

Arm is lined up with the centre of the Slot in the Pole

Step 2: Re-insert the Grub Screw

previously removed. Turn the Grub

Screw clockwise until it is tight.

Do not over-tighten

5mm Allen Key

Phillips Head

Screwdriver

Loosen

Tighten

Security Screw

Hole

M4 x 16mm

Security Screw

Monitor head

screw

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AF-M
Kleur van het product:	Zwart, zilver
Breedte:	124 mm
Hoogte:	440 mm
Gewicht verpakking:	2300 g
Breedte verpakking:	195 mm
Diepte verpakking:	500 mm
Hoogte verpakking:	96 mm
Materiaal behuizing:	Aluminium, Plastic
In hoogte verstelbaar:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	8 kg
Aantal per verpakking:	1 stuk(s)
Draaihoek:	360 °
Pan bereik:	0 - 140 °
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	1
(Buitenste) hoofdverpakking hoogte:	230 mm
(Buitenste) hoofdverpakking breedte:	510 mm
(Buitenste) hoofdverpakking brutogewicht:	14900 g
(Buitenste) hoofdverpakking lengte:	630 mm
Hoeveelheid per (buitenste) hoofdverpakking:	6 stuk(s)
Bereik kantelhoek:	-70 - 70 °
Maximale schermgrootte:	- "
Minimale schermgrootte:	- "