Atdec A-HDA-0818 Handleiding

Atdec Niet gecategoriseerd A-HDA-0818

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec A-HDA-0818 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

A-HDA-0818 Page 1 of 4

Installation Guide

A-HDA-0818

Heavy Duty Monitor Arm

COMPONENT CHECKLIST

REQUIRED TOOLS

Lower Arm

(x1)

Upper Arm

(x1)

VESA Plate

(x1)

Screw

M4x12mm

(x4)

6mm Allen Key

(x1)

4mm Allen Key

(x1)

Screw

M8x160mm

(x1)

Bolt Through

Plate

(x1)

Desk Clamp

(x1)

• Phillips Head Screwdriver

WEIGHT RANGE

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

! Curved monitors, deep devices (such as all-in-one PCs) and oset VESA locations exert additional leverage that can exceed the

capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like

further information.

Flat Monitors

8 - 18kg

(17.6 - 40lbs)

Curved Monitors

8 - 10kg

(17.6 - 22lbs)

A-HDA-0818 Page 2 of 4

1A Base Installation - Desk Clamp

2 Assemble Arm

3 Assemble Monitor to Arm and Adjust Tilt Tension

Desk thickness

10 - 50mm

(0.4 - 2”)

Hole size

≥ 8.5mm

(0.33”)

(2”)

Desk thickness

range ≤ 50mm

1B Base Installation - Bolt Through

2.1

3.1

2.2 2.2

3.2 3.3

Adjust Tilt according

to monitor weight

Adjust pivot

tension according

to desired freedom

of movement.

A-HDA-0818 Page 3 of 4

4 Adjust Arm Spring Tension

6 Removing Monitor from Arm

5 Cable management

Arm must be in horizontal

position while adjusting

Ⅰ

Ⅱ

Ⅲ

Ⅰ Ⅱ

Ⅲ

Do not force or

over stress cable

covers when

removing and

assembling!

Allow an extra cable

length through the joints

for movemet of arm

4.1

6.1

5.1

Adjust tension until

the arm holds the

monitor in top and

bottom positions.

Pull tab back and

lift monitor o end

of arm

Remove Cable Covers

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	A-HDA-0818
Kleur van het product:	Zwart
Gewicht:	3800 g
Breedte:	200 mm
Hoogte:	140 mm
In hoogte verstelbaar:	Ja
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	17.6 kg
Paneelmontage-interface:	75 x 75, 100 x 100 mm
Lengte:	480 mm
Draaihoek:	360 °
Pan bereik:	-45 - 45 °
Montage:	Klem/doorvoer
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	1
Verbeterd kabelbeheer:	Ja
Bereik kantelhoek:	-45 - 75 °
Maximale schermgrootte:	- "
Minimale schermgrootte:	- "