Atdec A-STSWW Handleiding

Bekijk gratis de handleiding van Atdec A-STSWW (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Atdec A-STSWW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Instructions

Wall Mounted

Sit-to-Stand Workstation

Component Checklist

Step 1. Check Components

AB CDE

Lower ArmUpper ArmVertical Screen

Slider Keyboard TrayTilt Head

A-STSWW

• 8mm wrench

• Drill

• 10mm masonry bit

• 4.5mm drill bit

• Ratchet

• Spirit Level

• Stud Finder

• Pencil

5mm Allen6mm Allen2.5mm Allen

M6X8 (x1)M4x10 (x4)M6X12 (x4)M8X20 (x1)

8mm

¼” Drive

Velcro

Strip (x2)

HJKL MN

POQR ST

Tools Required

Plastic

Washer (x1)

Coach

Screw (x6)Nylon

Anchor (x6)

Metal

Washer (x1)

M6X10 (x3)

Hardware

F G

Wall Mounting Hardware

Check that you have received all parts against the Component Checklist.

! IMPORTANT - Install as per Installation Instructions

! The manufacturer accepts no responsibility for incorrect installation.

! This product supports a maximum load 8Kg (17.6lbs.)

! The wall mount can be installed on vertical, flat, solid concrete or brick walls, or timber stud walls only.

! The wall should be strong enough to sustain a weight of at least four times that of the display and wall mount bracket combined.

If in doubt, consult a structural engineer.

! Check wall anchors and screws every 3 months from the time of installation to ensure the workstation is firmly fixed to the wall.

! Tighten all screws (do not exert excessive force to avoid breaking the screws or damaging their thread)

IMPORTANT INFORMATION

Product specificaties