Aruba Instant IAP-134 Handleiding

Aruba Access point Instant IAP-134

Lees hieronder de 📖 handleiding in het Nederlandse voor Aruba Instant IAP-134 (16 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Aruba IAP-130 Series Instant Access Point
Installation Guide
0511013-02 | November 2011 1
The Aruba IAP-134 and IAP-135 Instant access points support the IEEE 802.11n standard for high-
performance WLAN. These access points use MIMO (Multiple-in, Multiple-out) technology and support
existing 802.11a/b/g/n wireless services.
The Aruba IAP-130 Series access points provide the following capabilities:
Wireless transceiver
Protocol-independent networking functionality
IEEE 802.11a/b/g/n operation as a wireless access point
IEEE 802.11a/b/g/n operation as a wireless air monitor
Compatibility with IEEE 802.3at PoE
Minimum Software Requirements
The IAP-130 Series access point requires Aruba Instant 2.0 or later.
Package Contents
IAP-134 or IAP-135 access point
Installation guide (this document)
Aruba Instant Quick Start Guide
9/16” Ceiling Rail Adapter
15/16” Ceiling Rail Adapter
N O T E
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
N O T E
Additional mounting kits for use with the IAP-130 Series access points are sold separately. Contact your Aruba
sales representative for details.
2 Aruba IAP-130 Series Instant Access Point | Installation Guide
Device Overview
Figure 1 IAP-130 Series Access Points (IAP-134 Shown)
LEDs
The IAP-130 Series access point is equipped with five LEDs that indicate the status of various components
of the device.
PWR: Indicates the whether or not the IAP-130 is powered on and its status.
ENET 0: Indicates the status and activity of Ethernet port 0
ENET 1: Indicates the status and activity of Ethernet port 1
11b/g/n: Indicates the status of the 2.4 GHz radio
11a/n: Indicates the status of the 5.0 GHz radio
For more information about the LEDs and their behavior, see Table 3 on page 9.
External Antenna Connectors
The IAP-134 is designed for use with external antennas. The IAP-135 is equipped with internal antennas. For
more information about antenna types and configurations, visit www.arubanetworks.com.
AP-134_003
134
Antenna Connectors (IAP-134 Only)
LED Status Indicators
Aruba IAP-130 Series Instant Access Point | Installation Guide 3
Figure 2 IAP-130 Series Rear
Console Port
Use the console port to connect to a terminal for direct local management.
Ethernet Ports
IAP-130 Series is equipped with two 10/100/1000Base-T (RJ-45) auto-sensing, MDI/MDX wired-network
connectivity ports. These ports support IEEE 802.3at Power over Ethernet (PoE) compliance, accepting 56
VDC as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE
midspan injector, or network infrastructure that supports PoE.
DC Power Socket
If PoE is not available, an optional Aruba AP AC-DC adapter kit (sold separately) can be used to power the
IAP-130 Series.
Reset Button
The reset button can be used to return the IAP-130 Series to factory default settings. To reset the IAP-130
Series:
1. Power off the IAP-130 Series by removing the Ethernet cable (POE) or power adapter cable.
2. Press and hold the reset button using a small, narrow object, such as a paperclip.
3. Power-on the IAP-130 Series without releasing the reset button. The power LED will flash within 5
seconds.
AP-134_002
CONSOLE ENET 1 ENET 0
Reset Button
DC Power Socket
Kensington Security Slot
N O T E
Use the ENET 0 port for uplink connections to a switch or router. The ENET 1 port does not provide wired
connectivity.


Product specificaties

Merk: Aruba
Categorie: Access point
Model: Instant IAP-134

Heb je hulp nodig?

Als je hulp nodig hebt met Aruba Instant IAP-134 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Aruba

Handleiding Access point

Nieuwste handleidingen voor Access point