AMX NT-SD-701 Handleiding

Bekijk gratis de handleiding van AMX NT-SD-701 (10 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 75 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over AMX NT-SD-701 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

N-Touch Panel Builder Tutorial1

SVSI N-Touch Panel Builder

Tutorial

The goal of this tutorial is to introduce the JavaScript interface of the N-Touch controller. Throughout the

tutorial, programming terminology is used, but little to no knowledge of JavaScript is assumed. Instead,

you are encouraged to copy/paste the examples and modify them to suit your needs.

NOTE: For links to more detailed information outside the scope of this tutorial, see the section Additional

Resources on page7.

For this tutorial, we are going to build a control panel which allows the following control at the touch of a

button:

Switching multiple sources (a Media Player and a Laptop) to multiple displays (two TVs).

Turning a TV on and off using serial commands to enable and disable the video port.

Toggle a display’s source back and forth based on feedback.

NOTE: The system example used for this document is shown in FIG. 1 and is built using N2000 Encoders

and Decoders. However, the procedure given would be applicable whether the device is controlling an

N1000, N2000, or N3000 based system. When using N-Command, ports 80 and 3001 cannot be blocked

for the N-Command device’s IP addresses (in order for Panel Builder to work correctly).

FIG. 1 Example Setup

Product specificaties