AMX MXT-1000 Handleiding

Bekijk gratis de handleiding van AMX MXT-1000 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 728 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over AMX MXT-1000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

QUICK START GUIDE

MXT-1000 10.1" Modero X

®

Series Tabletop Touch Panel

Overview

The MXT-1000 10.1" Modero X Series

®

Tabletop Touch Panel (FG5968-03)

features edge-to-edge capacitive touch glass with multi-touch capabilities. It

features advanced technology empowering users to operate AV equipment

seamlessly, while providing the ultimate in audio and video quality. The distinctive

appearance will complement even the most sophisticated meeting facilities and

homes.

Product Specifications

Note: The MXT-1000-NC (FG5968-24) No Comm touch panel does not have

camera, microphone, or NFC capability. It otherwise has all of the functionality of

the MXT-1000 panel

Connector Locations

USB peripherals (mouse, keyboard, etc.) may be connected to either of the two

USB ports on the rear of the device. Updates to the device’s firmware can also

made via the USB ports (FIG.2).

Power via PoE

Power for the MXT-1000 is supplied via PoE (Power Over Ethernet ), utilizing an

AMX-certified, capacitive touch-compliant PoE injector such as the PS-POE-AT

High Power PoE Injector (FG423-81) or other approved AMX PoE power source

Connect the incoming Ethernet cable to the RJ45 port on the cable attached to

the device.

Ethernet Cable Installation and Modification

In installations where you wish to conceal the Ethernet cable, a hole at least 1.00”

(2.54 cm) in diameter is required in the surface to allow passage of the female

RJ45 connector (FIG.3).

If using a smaller hole is unavoidable, you will need to disconnect the Ethernet

cable (ECA5968-05) from the device, to feed the male end of the cable through.

Note: The minimum diameter hole through which the Ethernet cable may pass is

0.50" (1.27 cm).

To disconnect and reconnect the MXT-1000’s Ethernet cable:

1.On a soft surface, turn the MXT-1000 face-down to access the bottom of the

device.

2.Remove the clamp holding the Ethernet cable (FIG.3).

3.Remove the Ethernet cable connector and pull the cable out of the clamp.

4.Pass the Ethernet cable (ECA5968-05) through the hole, with the RJ45

connector on the other side of the installation surface from the device.

5.Press the Ethernet cable back into the clamp.

Do NOT tighten the clamp at this time.

6.Using a non-conductive item such as a wooden stick, reinsert the Ethernet

cable connector into the device. Ensure that the connector is properly

seated.

7.Tighten the clamp to secure the Ethernet cable.

Make sure the clamp is around the bundled black cable, not the individual

wires.

8.Connect the RJ45 connector to its incoming Ethernet cable and apply power.

FIG. 1 MXT-1000

MXT-1000 SPECIFICATIONS

Dimensions (HWD) 6 7/8" x 9 7/8" x 4 7/8" (174mm x 252mm x 124mm)

Weight3.0 lbs (1.36 Kg)

Power

Consumption

•Full-On: 8W

•Standby: 3.2W

•Shutdown: 1W

•Start-Up Inrush Current: Not applicable due to PoE standard

External Power

Supply Required

Optimal performance requires use of one of the following AMX

PoE power supplies (not included):

•PS-POE-AF-TC, PoE Injector, 802.3AF Compliant (FG423-83)

•NXA-ENET8-2POE, Gigabit PoE Ethernet Switch (FG2178-63)

Certifications•UL 60950-1

•FCC Part 15 Class B

•C-Tick CISPR 22 Class B

•CE EN 55022, EN 55024 and EN 60950-1

•IEC 60950-1

•IC

•IEC/EN-60950

•RoHS/WEEE compliant

Environmental•Temperature (Operating): 32°F to 104°F (0°C to 40°C)

•Temperature (Storage): 4°F to 140°F (-20°C to 60°C)

•Humidity (Operating): 20% to 85% RH

•Humidity (Storage): 5% to 85% RH

•Power ("Heat") Dissipation:

On: 21.3 BTU/hr

Standby: 10.6 BTU/hr

Included

Accessories

•MXA-USB-C, USB Port Cover Kit, Modero X/S Series Touch

Panel (FG5968-18)

•3/4" Mini-Grommet (FG570-01)

•MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)

Sleep Button

NFC Sensor

USB Ports (2)

Sleep Button

FIG. 2 MXT-1000 - REAR VIEW

FIG. 3 BOTTOM OF THE MXT-1000

USB PortsEntry for RJ45/PoE Cable

Speaker

Sleep button

Ethernet Cable

Connector

Clamp

Product specificaties