AMX MXA-FMK-10 Handleiding

AMX Niet gecategoriseerd MXA-FMK-10

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX MXA-FMK-10 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

QUICK START GUIDE

MSA-RMK-10 10.1” Modero S Series® Rack Mount Kit

Overview

The MSA-RMK-10 Modero S Series ® Rack Mount Kit (FG2265-14) is an optional

accessory for the MSD-1001 10.1” Modero S Series Wall Mount Touch Panel (FIG. 1).

The kit allows the touch panel to be mounted directly on an equipment rack, and

includes a rack mount frame, screws and washers.

Product Specif ications

Installation of the MSA-RMK-10

The MSA-RMK-10 offers a stable installation mount for the MSD-1001 through the

panel’s Back Box.

NOTE: All doors, covers, and other obstacles preventing installation of the Rack Mount Kit

should be removed before installation is attempted. Due to the size of the Modero S Series

panel, it may not be possible to close racks that contain a rack door, once installation is

complete.

To install the MSA-RMK-10:

1. Secure the Rack Mount Panel to the rack with #10-32 screws. Make sure that the

installation flanges face away from the front of the rack (FIG. 2).

2. Insert the Back Box into the Rack Mount Panel, making sure that the Back Box is

in the correct orientation. The stand-offs on the installation flanges will pass

through the Back Box and help anchor it in place.

3. Use the #8-32 screws to attach the Back Box to the stand-offs. Note that the

Rack Mount Panel has four stand-offs.

WARNING: The maximum recommended torque to be used on the Back Box

installation screws is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening

the screws, such as with powered screwdrivers, can strip out the screw holes or

damage the plastic back box..

4. With the Back Box anchored in the Rack Mount Panel (FIG. 3), you may now install

the MSD-1001 into the Back Box.

NOTE: For more information on installing the MSD-1001 into its back box, please refer to

the MSD/T-1001 Operation Reference Guide, available from www.amx.com.

FIG. 1 MSA-RMK-10

MSA-RMK-10 (FG2265-14) SPECIF ICATIONS

Dimensions (HWD): 6.97” x 19.00” x 2.15” (17.70 cm x 48.26 cm x 5.45 cm)

Weight: 2.60 lbs (1.47 kg)

Included Accessories: • Screws (4), #8-32 X 1.00, PPH (80-0140)

• Screws (4), #10-32 X .625, PH.TRUSS, BLK (80-0186)

• Washers (4), #10, BLACK NYLON (80-0342)

19.00” (48.26 cm)

6.97”

(17.70 cm)

2.15”

(5.45 cm)

Front View

Top View

Side View

6.97”

(17.70 cm)

2.15” (5.45 cm)

Installation

Flanges

Stand-offs

FIG. 2 INSTALLATION OF THE BACK BOX INTO THE MSA-RMK-10, FRONT VIEW

FIG. 3 FINAL ASSEMBLY OF THE MSA-RMK-10 WITH BACK BOX

#10-32 Screws

#10-32 Washers

Attach the Rack-Mount

Kit to the equipment rack

Back Box

Rack Mount Panel

Installation Flanges

# 8-32 Screws (x4)

Attach the Back Box

to the Rack-Mount Kit

(with 4 Stand-offs)

Back Box

Rack Mount Kit

trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their

respective companies.

AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

93-2265-14 REV: C

Last Revised: 11/05/2015

A Note About Wall and Rack Installation

Some products are installed in areas of differing temperature and cooling

methodologies. These include products installed in walls, racks, cabinets, etc. Those

areas may have different temperatures and/or cooling approaches that must be

taken into consideration to maintain the product within the specified operating

temperature.

FIG. 4 shows an AMX device installed in a wall with a filled volume (such as with

insulation or concrete), as well as with a closed volume (such as between studs in an

otherwise finished wall). The diagram shows how heat generated by the device or

other devices may have no way to escape, and may build up to levels that may affect

device operation.

In FIG. 5, the diagram displays an AMX device in a typical rack mounting, with full air

circulation around the front and back of the device. In this case, the main concern is

with heat building up between components, possibly to levels that may affect device

operation.

Installation Recommendations

During any installation, a lack of ventilation may produce conditions that may

adversely affect the device’s operation. In these circumstances, special care must be

made to make sure that temperatures within enclosed areas do no t exceed the

device’s maximum rated temperature.

Additional Documentation

For additional mounting options, accessories, or touch panel information, refer to

the documentation available at www.amx.com.

FIG. 4 HEAT CONVECTION IN FILLED OR CLOSED VOLUME, LIMITED OR NO CONVECTION

FIG. 5 HEAT CONVECTION IN RACK-MOUNTED DEVICES

Product specificaties

Merk:	AMX
Categorie:	Niet gecategoriseerd
Model:	MXA-FMK-10
Kleur van het product:	Zwart
Montagewijze:	Muur
Compatibiliteit:	MXD-1001-P (FG5968-48), MXD-1001-L (FG5968-49), MXD-1000-P (FG5968-07), MXD-1000-L (FG5968-13), MXD-1000-P-NC (FG5968-25), MXD-1000-L-NC (FG5968-26)
Aantal displays ondersteund:	1