Alesis Q61 Handleiding

Alesis Midi-keyboard Q61

Lees hieronder de 📖 handleiding in het Nederlandse voor Alesis Q61 (24 pagina's) in de categorie Midi-keyboard. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Q61

Q61 Q61

QUICKSTART GUIDE

ENGLISH ( 2 - 5 )

GUÍA DE INICIO RÁPIDO

ESPAÑOL ( 6 - 9 )

GUIDE D'UTILISATION RAPIDE

FRANÇAIS ( 10 - 13 )

GUIDA RAPIDA

ITALIANO ( 14 – 17 )

KURZANLEITUNG

DEUTSCH ( 18 - 21 )

BOX CONTENTS

• Q61

• USB Cable

• Quickstart Guide

• Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM

Please refer to the following scenario for connecting the Q61.

1. Connect a USB cable from your computer to the

Q61. The unit will be powered through the USB

connection. Alternatively, if you do not wish to use

a computer in your setup or if you wish to power the

Q61 externally, please plug in a 9V DC, 500mA

power adapter, center-positive, 5.46mm barrel

diameter.

2. If you would like to use an external sound module,

connect a 5-pin MIDI cable from the KEYBOARD

MIDI OUT of the Q61 to the MIDI IN of the external

device.

REAR PANEL OVERVIEW

1. DC POWER ADAPTER INPUT – Plug

in a 9V DC, 500mA power adapter,

center-positive, 5.46mm barrel

diameter (sold separately) if you do not

wish to power the Q61 through the

USB connection.

2. USB CONNECTION – Plug a standard

USB cable into this outlet and into the

USB port of your computer. The computer's USB port will provide power to the Q61. This connection is

used to send and receive MIDI data to and from your computer and may also be used to send MIDI

data from your computer to a device attached to the MIDI OUT port of the Q61.

3. MIDI OUT – Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an

external device. This jack sends the MIDI data output from the keyboard.

4. SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal (sold separately) to this input.

EXTERNAL

SOUND MODULE

(not included)

COMPUTER

(not included)

POWER ADAPTER

(not included)

SUSTAIN

PEDAL

(not included)

1234

TOP PANEL OVERVIEW

1. KEYBOARD – The KEYBOARD functions as a normal electronic piano keyboard during performance but can also be

used to adjust MIDI settings and send MIDI messages. The labels above the keys indicate their functions. The

numbered keys allow you to enter values for settings. Press the Cancel or Enter key to cancel or confirm your selection,

respectively. See SELECTING & EDITING MIDI COMMANDS for more information.

2. PITCH BEND WHEEL – Transmits MIDI Pitch Bend information to raise or lower the pitch of a note temporarily.

3. MODULATION WHEEL – This wheel can be used to transmit continuous controller data (CC #1 – Modulation).

4. DATA ENTRY SLIDER – This slider lets you send MIDI messages for the currently selected parameter from the

KEYBOARD (e.g., REVERB DEPTH, VOLUME, etc.). You can select a parameter by pressing MIDI / SELECT then the

corresponding key on the KEYBOARD.

5. MIDI / SELECT – Pressing this button allows you to adjust MIDI settings and send MIDI messages by pressing labeled

keys on the KEYBOARD. See SELECTING & EDITING MIDI COMMANDS for more information.

6. OCTAVE UP / DOWN – These buttons can be used to shift the keyboard's range up and down.

SELECTING & EDITING MIDI COMMANDS

The MIDI / SELECT button and the keys on the KEYBOARD allow you to adjust MIDI parameters and send precise MIDI

messages and information quickly and easily:

1. Press MIDI / SELECT.

2. Press the key on the KEYBOARD whose MIDI setting (printed above the key) you want to adjust or send.

3. Enter a value with the numbered keys on the KEYBOARD.

4. Press the Enter or Cancel key on the KEYBOARD to confirm or cancel your choice, respectively.

MIDI CHANNELS – Selects the MIDI channel (1-16) over which the Q61 will transmit MIDI messages. The default is Channel

ASSIGNMENT DATA ENTRY GROUP

These parameters change the MIDI command sent by the Data Entry Slider. To change the Values, press the

MIDI/SELECT button, then press the corresponding Key. Press the MIDI/Select Button to exit.

VELOCITY – Press this key to set the DATA ENTRY SLIDER to adjust the note velocity. Increasing this value increases the

MIDI velocity value generated by a light key press.

REVERB DEPTH – Press this key to set the DATA ENTRY SLIDER to CC #91 (Reverb Send Level). The default value for this

setting is 64.

CHORUS DEPTH – Press this key to set the DATA ENTRY SLIDER to CC #93 (Chorus Send Level). The default value for this

setting is 64.

PAN POT – Press this key to set the DATA ENTRY SLIDER to CC #10 (Pan). The default value is 64 (center).

VOLUME – Press this key to set the DATA ENTRY SLIDER to CC #7 (Channel Volume).

CC DATA – Press this key to set the DATA ENTRY SLIDER to the CC# designated by the CC NO. control.

OCTAVE GROUP -

These parameters change the octave range of the keyboard.

-1 – Lowers the octave range of the keyboard by one octave.

STANDARD- Sets the octave range to the default value with the first key being C0.

+1 – Raises the octave range of the keyboard by one octave.

Product specificaties

Merk:	Alesis
Categorie:	Midi-keyboard
Model:	Q61
Kleur van het product:	Zwart
Type stroombron:	DC
MIDI out:	Ja
Interface:	USB
MIDI-toetsenbord aantal toetsen:	61 toetsen
Ingangsspanning:	9 V