Radial Engineering SGI RX Handleiding
Bekijk gratis de handleiding van Radial Engineering SGI RX (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Radial Engineering SGI RX of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2

www.radialeng.com
Radial Engineering Ltd.
®
USER GUIDE
Radial Engineering Ltd.SGISGI
FEATURES
RADIAL ENGINEERING 3 YEAR
TRANSFERABLE LIMITED WARRANTY
RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free
from defects in material and workmanship and will remedy any such
defects free of charge according to the terms of this warranty. Radial will
repair or replace (at its option) any defective component(s) of this product
(excluding nish and wear and tear on components under normal use) for
a period of three (3) years from the original date of purchase. In the event
that a particular product is no longer available, Radial reserves the right
to replace the product with a similar product of equal or greater value. In
the unlikely event that a defect is uncovered, please call 604-942-1001 or
email [email protected] to obtain a RA number (Return Authorization
number) before the 3 year warranty period expires. The product must be
returned prepaid in the original shipping container (or equivalent) to Radial
or to an authorized Radial repair center and you must assume the risk of
loss or damage. A copy of the original invoice showing date of purchase
and the dealer name must accompany any request for work to be performed
under this limited and transferable warranty. This warranty shall not apply
if the product has been damaged due to abuse, misuse, misapplication,
accident, or as a result of service or modication by any other than an
authorized Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE
ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES,
WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE SHALL EXTEND BEYOND THE
RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE
YEARS. RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSS
ARISING FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU LIVE AND
WHERE THE PRODUCT WAS PURCHASED.
User Guide - Part# R870 1115 20 / 01-2025 • © Copyright 2025 all rights reserved
Specications and appearance are subject to change without notice.
SGI
STUDIO GUITAR INTERFACE
1
23
6
54
1
2
3
4
POWER LED - indicates the
SGI TX is active when power
supply is connected.
DRAG - load correction
allows you to dial in the
proper load for your pickups.
INPUT - ¼" jack for
instrument connection.
8
7
6
5
RECEIVE - locking XLR input
receives balanced signal from
SGI TX unit.
OUTPUT - ¼" jack outputs
guitar signal.
87
TRANSMIT - XLR output
transmits balanced signal to
the SGI RX unit.
POWER - connection for
included 15VDC power
supply. The SGI is also
compatible with pedalboard
power supplies ranging from
9V to 15V.
SGI TX
SGI RX
GROUND LIFT - reduces
ground loop hum by
disconnecting the ground path
from pin-1 on the XLR jack.
Radial Engineering Ltd.
1845 Kingsway Ave. Unit 1165
Port Coquitlam, BC V3C 0H3, Canada
Tel: 604-942-1001
Email: [email protected]
To meet the requirements of California Proposition 65, it is our responsibility to
inform you of the following:
WARNING: This product contains chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm.
Please take proper care when handling and consult local government
regulations before discarding.
®
Product specificaties
| Merk: | Radial Engineering |
| Categorie: | Niet gecategoriseerd |
| Model: | SGI RX |
Heb je hulp nodig?
Als je hulp nodig hebt met Radial Engineering SGI RX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Radial Engineering
10 Maart 2026
2 Maart 2026
27 Februari 2026
27 Februari 2026
27 Februari 2026
28 September 2025
22 September 2025
15 September 2025
2 April 2025
25 Februari 2025
Handleiding Niet gecategoriseerd
Nieuwste handleidingen voor Niet gecategoriseerd
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026
10 Maart 2026