Zoom TAC-2R Handleiding

Zoom Audio/video-converter TAC-2R

Lees hieronder de 📖 handleiding in het Nederlandse voor Zoom TAC-2R (16 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Copying or reprinting this manual in part or in whole without permission is prohibited.

Operation Manual

Introduction

Introduction ……………………………… 2

Usage and Safety Precautions ……… 3

Part Names ………………………………4

Installing the Driver …………………… 6

Connecting with a Computer ………… 7

Recording ………………………………… 8

Playback ……………………………… 11

Connecting MIDI Devices …………… 13

Restoring Factory Default Settings 13

Troubleshooting ……………………… 14

Speciﬁcations ………………………… 15

Contents

Introduction

2-in/2-out Thunderbolt™ audio converter

The audio converter uses Thunderbolt™, the latest generation of high-speed interface

technology. With this, we have realized a system with low latency that was not possible using USB 2.0.

Since it also supports recording and playback at up to 24-bit/192kHz, it can also be used for the playback

of high-resolution sound sources delivered with superior audio quality over the Internet.

Attention to audio performance

The entire system reproduces the original audio faithfully. An asynchronous transfer system

that is not impacted by computer jitter is used along with the latest AD/DA converter, which

supports 192kHz.

Built-in high-performance mic preamps

The high-performance mic preamps are based on those developed for our H Series. Each

input also supports Hi-Z connections. The gain can be raised by up to 60 dB, and +48V

phantom power can be supplied.

dedicated mixer application

Use this application to make internal mixer and monitoring effect settings. For details about

, see the ZOOM website (http://www.zoom.co.jp/downloads/).

Usage and Safety Precautions

SAFETY PRECAUTIONS

In this operation manual, symbols are used to highlight warnings

and ca utions that you must read to pre vent accidents. The

meanings of these symbols are as follows.

Warning

Something that could cause serious injury or death

Caution

Something that could cause injury or damage to the

equipment

Other symbols used

An action that is mandatory

An action that is prohibited

Warnings

Alterations

Do not open the case or modify the product.

Precautions

Product handling

Do not drop, bump or apply excessive force to the unit.

Be careful not to allow foreign objects or liquids enter the unit.

Operating environment

Do not use in extremely high or low temperatures.

Do not use near heaters, stoves and other heat sources.

Do not use in very high humidity or where it could be splashed by water.

Do not use in places with frequent vibrations.

Do not use in places with much dust or sand.

Connection cables and input/output jacks

Always turn the power OFF for all e quipment be fore connecting any

cables.

Always di sconnect all connection cables and the AC ada pter before

moving the unit.

Volume

Do not use at a loud volume for a long time.

Usage Precautions

Interference with other electrical equipment

In consideration of safety, the has been designed to minimize its

emission of electromagnetic waves and to suppress interference from external

electromagnetic waves. However, equipment that is very susceptible to interference

or that emits powerful electromagnetic waves could result in interference if placed

nearby. If this occurs, place the and the other device farther apart. With

any type of electronic device that uses digital control, including the ,

electromagnetic interference could cause malfunction, corrupt or destroy data and

result in other unexpected trouble. Always use caution.

Cleaning

Use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use

a damp cloth that has been wrung out well. Never use abrasive cleansers, wax or

solvents such as alcohol, benzene or paint thinner.

Temperature considerations

Continuous use of this interface for long periods of time, for example, might cause it

to become warm. This is normal as long as it does not become too hot to touch.

Breakdown and malfunction

If the should malfunction or operate abnormally, disconnect it

immediately. Then, contact the retailer where you purchased it or Zoom support and

provide the following information: product model, serial number and details of the

symptoms of malfunction or abnormal operation, as well as your name, address and

telephone number.

Copyrights

• Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc.

• Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S.

and/or other countries.

•

MIDI is a registered trademark of Association of Musical Electronics Industry (AMEI).

• All other product names, trademarks and company names in this document are

the property of their respective owners.

Note: All trademarks and registered trademarks in this document are for

identiﬁcation purposes only and are not intended to infringe on the copyrights of

their respective owners.

Recording for any purpose other than personal use from copyrighted sources,

including CDs, records, tapes, live performances, video works and broadcasts,

without permission of the copyright holder is prohibited by law.

Zoom Corporation will not assume any responsibility related to infringements of

copyrights.

Product specificaties

Merk:	Zoom
Categorie:	Audio/video-converter
Model:	TAC-2R
Kleur van het product:	Zwart, zilver
Gewicht:	714 g
Breedte:	176 mm
Diepte:	113.9 mm
Hoogte:	46.2 mm
Audio (L,R) out:	1
Compatibele besturingssystemen:	Thunderbolt-equipped Macintosh computers running OS X 10.9.5 or later
Stroomverbruik (typisch):	10 W
RMS ingangsspanning:	48 V