Watts MILUX RF Chrono-Thermostat Handleiding

Bekijk gratis de handleiding van Watts MILUX RF Chrono-Thermostat (18 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 417 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over Watts MILUX RF Chrono-Thermostat of wil je andere gebruikers van dit product iets vragen? Stel een vraag

USER GUIDE GB

RF basic thermostat WFHTRF 01 (20033)

TECHNICAL CHARACTERISTICS

MODES DESCRIPTION

LED INDICATOR

Red: - Heating indication (During consign adjustment)

Red Blinking: - 1 second cycle => Low batteries indication.

Green blinking:- Radio transmission (1 flash by transmission)

Room

setting.

Select

mode.

LED Indicator.

PPL IMP 1134A

Measured temperature

precision0.1°C (or 0.2°F)

Operating temperature0°C - 50°C (or 32°F – 122°F)

Setting temperature range5°C – 30°C (or 41°F - 86°F)

Regulation

characteristics Proportional band 15min for 2°K

Electrical ProtectionClass II - IP30

Power Supply

Battery operated life 2 x 3V (CR2430)

~ 2 years

Radio frequency 433.92 MHz, <10mW.

certifications CE. EN 301489-1, EN 300220-1

(Radio frequency certifications)

Soft version V 2.0x

RADIO CONFIGURATION MODE

Batteries

- Turn the thermostat in Off position.

- To assign (*) the RF thermostat with the receiver you must put the

receiver in “RF init” mode (please refer to the receiver leaflet).

- After you have just made the thermostat in or mode.

The thermostat sends its configuration address by radio signal. (The

thermostat LED blinks green)

*

(

In this mode the thermostat should be near the receiver

)

- Radio frequency RF thermostat (433.92 Mhz) specially designed for water floor

heating.

- Personal code on each product.

- Equipped with a switch to select 3 different operating modes:

-Comfort (The thermostat follow the setting temperature)

- Off

-

Night reduction (The thermostat follow the setting temperature – 4°C)

- To be used only with ours receivers.

Product specificaties