VTech VM5266 Handleiding

Bekijk gratis de handleiding van VTech VM5266 (2 pagina’s), behorend tot de categorie Médialejátszó. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over VTech VM5266 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

For operations and guides to help you use your video monitor,

and for the latest information and support, check out our online

help topics and online FAQs.

Use your smartphone or mobile device to access our online help.

• Go to https://help.vtechphones.com/vm5266 or

https://help.vtechphones.com/vm5266-2; OR

• Scan the QR code on the right. Launch the camera app or QR code scanner app

on your smartphone or tablet. Hold the device’s camera up to the QR code and

frame it. Tap the notification to be redirected to the online help page.

-If the QR code is not clearly displayed, adjust your camera’s focus by moving

your device closer or further away until it is clear.

You can also call our Customer Support at 1 (800) 595-9511 [in US] or

1 (800) 267-7377 [in Canada] for help.

Overview - Baby unit

Need help?

S

m

VM5266

VM5266-2

1Light sensor

2Camera lens

3Microphone

4

Night Light Control Key

• Tap to turn the night light on

or off.

5Infrared LEDs

• Allow you to see clearly in a

dark environment.

6Night light

7Speaker

8Temperature sensor

9PAIR/RESET key

• The parent unit and

baby unit(s) provided are

already paired.

10Power jack

11Slots for wall mounting

Specifications are subject to change without notice.

© 2023 VTech Communications, Inc. All rights reserved. 09/23.

VM5266-X_QSG_US_V1.

VM5266

VM5266-2

Video Baby Monitor

with Night Light

Go to www.vtechphones.com

to register your product for enhanced

warranty support and the latest VTech

product news.

1

Connect the baby monitor

What’s in the box

4

Status check

Once you power on both

your baby unit and parent

unit, your parent unit

displays image from the

baby unit, and the LINK

LED light turns on.

3

Positioning the baby monitor

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

Quick start guide

Technical specications

The applied nameplate is located at the bottom of the baby unit’s

base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and

injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 6.5

feet (2 meters).

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be

used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to a

bath, sink, swimming pool or shower.

7. CAUTION: Use only the battery provided (if applicable). There

may be a risk of explosion if a wrong type of battery is used

for the parent unit. The battery cannot be subjected to high or

low extreme temperature and low air pressure at high altitude

during use, storage or transportation. Disposal of battery in

fire or a hot oven, mechanically crushing or cutting the battery

can result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of flammable liquid of gas. Battery

subjected to extremely low air pressure may result in an ex-

plosion or the leakage of flammable liquid or gas. Dispose of

used battery according to the information in The RBRC seal.

8. Use only the power adapters included with this product.

Incorrect power adapter polarity or voltage can seriously

damage the product.

Power adapter information:

Output: 5V DC 1A

VTech Telecommunications Ltd.

Model: VT05EUS05100

-OR-

Jiangxi Jian Aohai Technology Co.,Ltd

Model: A318-050100W-US2

Rechargeable battery information:

Zhuhai Great Power Energy Co., Ltd.

Li-ion battery, 3.6V, 2600mAh, 9.36Wh;

Model: ICR18650-2.6Ah-3.6V-1S1P

9. The power adapter is intended to be correctly oriented in a

vertical or floor mount position. The prongs are not designed

to hold the plug in place if it is plugged into a ceiling, un-

der-the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power adapter)

should be installed near the equipment and should be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not modify the power adapters or replace with other

adapters, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type of

power source indicated on the marking label. If you are not

sure of the type of power supply in your home, consult your

dealer or electricity supply provider.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

17. This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back

or bottom of this product are provided for ventilation. To

protect them from overheating, these openings must not be

blocked by placing the product on a soft surface such as a

bed, sofa or rug. This product should never be placed near

or over a radiator or heat source.

18. Never push objects of any kind into this product through the

slots because they may touch dangerous voltage points or cre-

ate a short circuit. Never spill liquid of any kind on the product.

19. To reduce the risk of electric shock, do not disassemble this

product, but take it to an authorized service facility. Disas-

sembling or removing parts of the product other than via the

battery door (if applicable) may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

20. You should test the sound reception every time you turn on

the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless tele-

phones, etc. To protect your privacy, make sure the product

has never been used before purchase, reset the baby

monitor periodically by powering off and then powering

on the units, and power off the baby monitor if you are not

intending to use it for some time.

23. Children should be supervised to ensure that they do not

play with the product.

24. The small parts of this monitor can be swallowed by babies or

small children. Keep these parts out of reach of children.

25. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabili-

ties, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 32

o

F

(0

o

C) and 104

o

F (40

o

C).

• Mishandling batteries can cause burn, fire or explosion

hazards.

• Batteries should not be exposed to excessive heat such as

bright sunshine or fire.

• Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

• Warning—Strangulation Hazard—Chil-

dren have STRANGLED in cords. Keep this

cord out of the reach of children (more than

3 ft (0.9m) away). Do not remove warning

label on the adapter cord.

• Never place the camera unit(s) inside the baby’s crib or

playpen. Never cover the camera unit(s) or parent unit with

anything such as a towel or a blanket.

• Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless tele-

phones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic elds (EMF)

This VTech product complies with all standards regarding

electromagnetic fields (EMF). If handled properly and according

to the instructions in this user’s manual, the product is safe to be

used based on scientific evidence available today.

Important safety instructions

1 set for VM5266

2 sets for VM5266-2

Frequency controlCrystal controlled PLL synthesizer

Transmit frequencyBaby unit: 2405 - 2475 MHz

Parent unit: 2405 - 2475 MHz

Channels32

LCD5” Color LCD

(WQVGA 480x272 pixels)

Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range

may vary according to environmental conditions at the time of use.

Power requirementsParent unit: 3.6V, 2600mAh, 9.36Wh Li-ion battery

Baby unit power adapter: Output: 5V DC @ 1A

Parent unit power adapter: Output: 5V DC @ 1A

Caution

• The default volume of your parent unit

is level 4, and the maximum volume

is level 7. If you experience feedback

noise from your baby monitor while

positioning:

-Make sure your baby unit and parent unit

are more than 3 feet (1 meter) apart, OR

-Turn down the volume of your parent unit.

NOTESNOTE

Note

• To avoid interference from other electronic

devices, place your baby monitor at least 3 feet

(1 meter) away from devices such as wireless

routers, microwaves, mobile phones and

computers.

Quick start guide

VM5266

VM5266-2

For more support information

S

m

NOTESNOTE

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to an electronically controlled electric

power outlet.

• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed

to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table, or cabinet

outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby units and the power adapter cords are out of reach of children.

>

3ft (1m)

<

3ft (1m)

Caution

• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the

baby’s crib or playpen.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CONFORMS TO

Charge the parent unit battery

When you have connected and turned the parent unit on, the battery charges automatically.

NOTESNOTE

Notes

• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the

parent unit battery is fully charged, the battery icon segments are solid.

• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn

the parent unit off while charging.

• The standby time varies depending on the sensitivity level you set, your actual use and the age of the

battery.

The battery icon indicates the battery status (see the following table).

Battery indicatorsBattery statusAction

The screen displays .

The light flashes.

The battery has very little

power and can only be used

for a short time.

Charge

without interruption

(about

30 minutes).

The battery icon segments

are solid .

The battery is fully charged.To keep the battery charged, connect

the unit to AC power when in use.

1

Connect the baby monitor (cont’d)

2

Power on or off the baby monitor

Baby unit turns on automatically after

it connects to the power socket.

Disconnect from the power supply to

power off.

Press and hold POWER to power on or off

your parent unit.

Press and hold

Parent unit icons

Main

menu

Sub-menu

Brightness

• Adjust the parent unit’s LCD brightness.

Lullaby

/

Play/Stop lullaby

• Select one of the soothing sounds.

• Select one of the five melodies.

• Play all melodies.

• Set timer to stop playing the selected

melody or soothing sound.

Night Light

/

Turn on/off night light

4

5

6

7

• Select one of the night light colors.

• Change to all seven colors in cycle.

• Set a timer to turn the night light off.

• Set the night light to be always on.

• Set to turn on the night light automatically

when baby unit detects sound. It will

turn off after 15 minutes of no sound

detection. You can set Sound sensitivity

level to detect sounds that exceed set

levels. See Sound sensitivity and sound

activation section.

Main menu icons

Main

menu

Sub-

menu

A

/

• Turn on/off the adaptive night light

feature. When this feature is on, the baby

unit detects the ambience light. If the room

is bright, the night light adjusts itself to be

brighter; if the room is dim, the night light

adjusts itself to be dimmer.

Screen off Timer

Screen off Timer

• The parent unit screen will turn off after the

selected time to save energy. You can still

hear your baby while the screen is turned

off.

Sound Sensitivity

• When AUTO is selected, the parent unit

screen will automatically turn on when

detected sounds exceed a set level. You can

adjust the baby unit microphone sensitivity

level so that the higher the sensitivity

level, the more sensitive the baby unit is

in detecting sounds for transmitting to

the parent unit. For details, see the Sound

sensitivity and sound activation section.

• The parent unit will then turn off again

after 50 seconds if the sound detected is

lower than the set level.

NOTESNOTE

Note

• When the parent unit screen is off, if alerts

are received, for example, no signal received

between the parent unit and baby unit, or a

low battery, the parent unit screen will turn on.

Alert Tone Settings

• Set the parent unit to beep when the

battery is low.

• Set the parent unit to beep when the link

between the parent unit and the baby unit

is lost.

• Set the confirmation tone on or off when

selecting an option in the menus.

• Set the parent unit to beep when the baby

unit detects sounds while in Split mode

(For pairing with VM5266-2 only).

Main

menu

Sub-menu

Temperature

/

• Turn on/off temperature alert tone.

• Set the parent unit to beep whenever the

room temperature detected by the baby

unit falls outside of the set temperature

range.

• Set the minimum temperature.

• Set the maximum temperature.

• Set temperature display in Fahrenheit (

o

F)

or Celsius (

o

C).

Baby Unit Settings

Baby unit speaker volume

• Adjust the baby unit’s speaker

volume.

4X

2X

1X

• Zoom in.

Monitoring Mode (For pairing with VM5266-2 only)

• Single CAM mode

The screen displays images only fromthe

selected baby unit in full screen.

• Split mode

The screen displays images from all the

paired baby units at the same time in split

view.

• Patrol mode

The screen displays a single cam view that

transitions to a different baby unit every

10 seconds.

Basic operation - Parent unit

Overview - Parent unit

1

3

4

6

5

7

9

8

2

10

11

12

1

Antenna

2

3-level sound indicator

light

3

Battery LED light

4

LINK LED light

Adjust parent unit volume

Press VOL

-

/ VOL

+

to adjust your parent

unit speaker volume.

Zoom

1. Press to enter the menu.

2. Press or to select , then press

to confirm.

3. Press or to choose either 1X,

2X

or

4X

, depending on how

many times you want to zoom in, then

press

to confirm.

Talk to your baby unit

Press and hold TALK and speak to your

parent unit. Your voice is transmitted to

the baby unit. Release TALK when finished

talking and hear your baby again.

Press and hold

Turn off the screen

Press /POWER to turn off the parent unit

screen without powering off the parent

unit. You will still hear sounds from the

baby unit.

Tip

• Press any key on the parent unit to turn the

screen on again.

Use the menu

Press to enter the menu, choose a menu item, or save a setting. You

can use the parent unit for advanced settings or operations, such as

to play or stop the baby unit lullaby, or to adjust the baby unit sound

sensitivity.

While in the menu:

• Press or to scroll among the menu options.

• Press to select an item, or to save a setting.

• Press or to scroll among the sub-menus,

or to adjust a setting.

• Press to return to the previous menu options

without changing the current setting.

• Press

/TALK

to return to live video.

Press

5

Arrow keys

6

MENU /SELECT

7

RETURN/TALK

8

LCD off/POWER key

9

VOL

-

/ VOL

+

10

Power jack

11

RESET

12

Speaker

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

Product Recycling

Recycle this product when you are done with it.

For more information, scan the QR code

or visit vtechphones.com/recycle.

The parent unit turns on automatically after connecting the power adapter to the power socket

and the battery LED light illuminates for a few seconds, then turns off.

Strangulatio

n

Hazard

Keep this

cord

out of reach of children.

The co

r

d ne

eds to be at least three

f

ee

t

away fr

o

m the child at all times. Do

not

use with an extension cord. Do not

re

move this ta

g.

Éloignez ce cordon de

s enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’

ut

ilisez

pas

d

e ra

llon

ge.

N

e

ret

ir

ez

pas

cette étiquette.

M

an

tenga este cable f

u

era de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo

u

se

con

u

n

a extensión inalámbrica. N

o

quite

es

t

a etiqueta.

Risque

d’

étr

anglement

Riesgo de

est

ra

ngula

c

ión

> 1m (3ft)

< 1m (3ft)

> 1m (3ft)

5

3

4

2

1

6

7

8

11

10

9

Product specificaties