VTech SN5307 Handleiding

VTech Telefoon SN5307

Lees hieronder de 📖 handleiding in het Nederlandse voor VTech SN5307 (4 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

SN5307

Ampliﬁed Accessory Handset

with Picture Dial Buttons

for use with

VTech SN5127/SN5147

telephone system

User’s manual

Go to www.vtechphones.com

to register your product for enhanced

warranty support and latest VTech

product news.

Telephones identified with this

logo have reduced noise and

interference when used with most

T-coil equipped hearing aids and

cochlear implants. The TIA-1083

Compliant Logo is a trademark of

the Telecommunications Industry

Association. Used under license.

Compatible with

Hearing d T-CoilAi

TIA-1083

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This user’s manual provides you with

installation and operation instructions.

Please read this manual thoroughly to

ensure proper installation and operation of

this VTech product.

For support, shopping, and everything new

at VTech, visit our website at

www.vtechphones.com. In Canada, please

visit www.vtechcanada.com.

User’s manual

What’s in the box

Your product package contains the

following items. Save your sales receipt and

original packaging in the event warranty

service is necessary.

Install the battery

Install the battery as shown below.

• Use only supplied battery.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

Handset overview

1 – Visual ringer indicator

2 – Earpiece

3 – CHARGE light

4 – Photo speed dial keys

• Press to dial a preset number.

5 –

• Make or answer a call.

• During a call, press to answer an

incoming call when you receive a

call waiting alert.

6 –

• Hang up a call.

• Silence the ringer temporarily while

the phone is ringing.

• Mute the paging tone.

7 –

• Make or answer a call using the

speakerphone.

• Switch between the speakerphone

and the earpiece.

8 – Microphone

9 – Charging pole

10 – Speakerphone

11 – Battery compartment cover

12 – VOL+

• Increase the ringer volume and the

listening volume.

13 – VOL-

• Decrease the ringer volume and the

listening volume.

• Silence the ringer temporarily while

the phone is ringing.

• Mute the paging tone.

Charger overview

1 – Charging pole

Photo speed dial

Your handset has four photo speed dial

keys. It retrieves the four direct memory

entries set in your SN5127 telephone base,

or retrieves the ﬁrst four direct memory

entries set in your SN5147 telephone base.

Make sure you store the direct memory

M1, M2, M3 and M4 on your telephone

system respectively. For details, see the

Set photo speed dial section in the Quick

start guide or online Complete user’s

manual of the telephone base.

Insert photos for speed dial

keys

You can insert photos into the photo speed

dial compartments, or write the contact

names on cards and insert them into the

compartments.

To add a photo, crop your desired photo

into the size speciﬁed below, and then

insert the photo into the photo speed dial

compartment, as shown below.

• The handset is shipped with protective

stickers covering the photo speed dial

compartments. Remove the protective sticker

before use.

Settings

Adjust ringer volume

You can adjust the ringer volume level, or

turn the ringer off.

• When the handset is not in use, press

VOL- or VOL+.

• When the ringer volume is set to off,

the handset still rings when you press

PAGE/INTERCOM at the telephone base.

Caller ID announce

The voice announce caller ID feature lets

you know who the caller is. When you have

an incoming call, the handset speaks “Call

from...” and the name of the caller based

on the phonebook in your telephone base

or the caller ID information.

If the caller’s name is private or unknown,

the phone number up to the last 11 digits

will be announced. If the caller’s phone

number is also private or unknown, no

information will be announced.

To turn on or off this feature, refer to the

Caller ID announce section in the Quick

start guide or the online Complete user’s

manual of the telephone base.

• To use the caller ID announce feature, you

must subscribe to caller ID service from your

telephone service provider.

For SN5127/SN5147 telephone

1. Press and hold at the telephone PAGE

base for about ﬁve seconds until the

visual ringer indicator light turns on.

Keep holding PAGE until the visual

ringer indicator light begins to ﬂash.

Release PAGE.

2. Immediately press PAGE again while the

light is still ﬂashing.

You hear a conﬁrmation tone and the

CHARGE light on the handset ﬂashes when

the deregistration process completes. It

takes about 10 seconds to complete the

deregistration.

If deregistration fails, you need to reset the

system and try again. To reset, unplug the

power and the telephone line cord from

the telephone base. Then, plug the cords

back in again.

ECO mode

This power conserving technology reduces

power consumption for optimal battery

performance. The ECO mode activates

automatically whenever the handset is

synchronized with the telephone base.

General product care

Taking care of your telephone

Your cordless telephone contains sophisticated

electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the

original packing materials to protect your

telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet.

Do not use the handset outdoors in the rain,

or handle it with wet hands. Do not install the

telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power

surges harmful to electronic equipment. For

your own safety, take caution when using

electrical appliances during storms.

Using the photo speed dial

handset

Make a call

• Press a photo speed dial key to dial.

-OR-

• or , and then a photo Press

speed dial key to dial.

Answer a call

• or .Press

End a call

• or place the handset back in Press

the charger.

Speakerphone

• During a call, press to switch

between the speakerphone and the

earpiece.

Adjust listening Volume

• During a call, press or .VOL- VOL+

Call waiting

When you subscribe to call waiting service

from your telephone service provider, you

hear an alert tone if there is an incoming

call while you are already on a call.

• to put the current call on hold Press

and take the new call.

• at any time to switch back and Press

forth between calls.

Temporary ringer silencing

When the telephone is ringing, you can

temporarily silence the handset ringer

without disconnecting the call. The next

call rings normally at the preset volume.

• or .Press VOL-

Join a call in progress

You can use a maximum of two devices at a

time on an outside call.

• or to join the call.Press

• To exit the call, press or place the

handset back in the charger. The call

continues until all devices hang up.

Find handset

You can use the PAGE/INTERCOM feature

on the telephone base to ﬁnd misplaced

handsets.

To stop the paging tone:

• Press a photo speed dial key, , or

to take the intercom call.

• or to mute the paging Press VOL-

tone.

Deregister handset

Your telephone system supports a

maximum of four cordless handsets.

If you have registered four handsets and

you want to register another SN5307

handset, you have to deregister all

handsets ﬁrst. Then, register your desired

handsets individually.

• Deregister with caution! Once done, all

handsets will be deregistered from your

telephone system.

• You cannot deregister all handsets if any

other system device is in use.

• Even if your handsets have run out of battery,

you can still deregister them by following the

instructions in this section.

• To register any cordless handset back to the

telephone base, refer to the user’s manual of

your SN5127/SN5147 telephone for details.

THIS SIDE UP

Connect and charge the battery

• Use only the adapter provided.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations speciﬁed in this

manual.

• The adapter’s prongs are not designed to

hold the weight of the handset. Make sure

you connect the adapter to a wall outlet that

is in vertical or ﬂoor mount position. Do not

connect it to undermount and ceiling outlet.

Otherwise, your handset would fall out of the

outlet.

Connect the charger

Charge the battery

Once you have installed the battery and

placed the handset in the charger, the

CHARGE light indicates the battery status

(see the table below).

• For best performance, keep the handset in

the charger when not in use.

• The battery is fully charged after 12 hours of

continuous charging.

CHARGE

light

Battery status Action

Flashes

red every

10 seconds

The battery

has very little

charge and the

handset is not

in charger. The

handset cannot

dial out.

Charge without

interruption

(at least

30 minutes).

Red The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(at least

30 minutes).

Green The battery is

fully charged.

To keep

the battery

charged, place

it in the charger

when not in

use.

Before use

Add and register a photo speed dial

handset

SN5127/SN5147 telephone base before

use. Your telephone system supports a

maximum of four handsets.

• Charge the new handset without interruption

for at least 30 minutes before registering it to

the telephone base.

To register a photo speed dial

handset to the SN5127 telephone

base

1. Press and hold at the telephone PAGE

base for about ﬁve seconds until the

visual ringer indicator light turns on.

Release PAGE.

Lights overview

The following table summarizes the lights

patterns on the handset under various

conditions.

Light Pattern

CHARGE

light

• Red when the handset battery is

charging.

• Flashes red every 10 seconds

when the handset battery is low

and not charging.

• Green when the handset battery

is fully charged.

• Alternates red and green quickly

when handset registration is in

progress.

• Alternates red and green

slowly when the handset is not

registered and not in charger.

Visual

ringer

indicator

• Flashes orange slowly when the

handset is receiving an incoming

call.

• Green when the handset is on

earpiece mode.

• Flashes green slowly when the

handset received an incoming

call.

• Flashes green twice every 3

seconds when the line is in use

while the handset is idle.

• Orange when the handset is on

speakerphone mode.

Voice prompts

The following table summarizes voice

prompts you hear under certain conditions.

Voice Prompt Condition

“ ” Any key is pressed when the Not registered

handset is not registered.

“ ” Any key is pressed when the Out of range

handset is out of range.

“ ”Low battery A photo speed dial key, , or

is pressed when the

handset battery is low.

2. Put the handset in the charger. The

handset CHARGE light alternates red and

green quickly to indicate the registration

is in progress.

3. You hear a conﬁrmation tone when

the registration process completes. It

takes up to 60 seconds to complete the

registration.

4. If registration fails, you hear an error

tone, and the CHARGE light alternates

red and green slowly when it is taken

out of the charger. Start again from Step

1 above.

• You cannot register a handset if any other

system device is in use.

• When you already have four registered

handsets, and you try to register another

handset to the telephone base, you hear four

beeps from the telephone base.

To register a photo speed dial

handset to the SN5147 telephone

base

1. Press and hold at the telephone

base for about ﬁve seconds until the

visual ringer indicator light turns on.

Release .

2. Put the handset in the charger. The

handset CHARGE light alternates red and

green quickly to indicate the registration

is in progress.

3. You hear a conﬁrmation tone when

the registration process completes. It

takes up to 60 seconds to complete the

registration.

4. If registration fails, you hear an error

tone, and the CHARGE light alternates

red and green slowly when it is taken

out of the charger. Start again from Step

1 above.

• You cannot register a handset if any other

system device is in use.

• When you already have four registered

handsets, and you try to register another

handset to the telephone base, you hear four

beeps from the telephone base.

Operating range

This cordless handset operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over a certain distance -

which can vary with the locations of the

telephone base and handset, the weather,

and the layout of your home or ofﬁce.

When the handset is out of range, the

handset plays the voice prompt “Out of

range” if any key is pressed. If there is a call

while the handset is out of range, it may

not ring, or if it does ring, the call may not

connect well when you press . Move

closer to the telephone base, then press

to answer the call.

During a call, if the handset is moved out of

range, the call will end automatically, and

you will hear a notiﬁcation tone.

26.8 mm

14.5 mm

Cleaning your telephone

Your telephone has a durable plastic casing that

should retain its luster for many years. Clean it

only with a soft cloth slightly dampened with

water or mild soap. Do not use excess water or

cleaning solvents of any kind.

Storage

When you are not going to use the handset for

some time, remove the rechargeable battery

from the handset. Store the handset, the

charger and the adapter in a cool and dry place.

Frequently asked questions

Below are the questions most frequently asked

about the cordless telephone. If you cannot ﬁnd

the answer to your question in the below table,

visit our website at www.vtechphones.com or

call for customer service. In 1 (800) 595-9511

Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

My handset

does not work

at all.

Make sure the charger is

installed properly, and battery

is installed and charged

correctly. For optimum daily

performance, return the

handset to the charger after

use.

Make sure the handset has

registered to a /SN5127 SN5147

telephone base.

I cannot dial

out.

Make sure you have set the

photo speed dial entries in the

telephone base as instructed.

For details, see the Set photo

speed dial section in the

Quick start guide or online

Complete user’s manual of the

telephone base.

I experience

poor sound

quality when

using the

handset

speakerphone.

For increased sound quality

while using the handset

speakerphone, place the

handset on a ﬂat surface with

the keys facing up.

The handset

does not ring

when there is

an incoming

call.

Press to increase the VOL+

ringer volume when the

handset is not in use.

The handset may be too

far from the telephone

base. Move it closer to the

telephone base.

SN5127 base SN5147 base

VTech Communications, Inc.

A member of THE VTECH GROUP OF COMPANIES.

VTech is a registered trademark of VTech Holdings Limited.

Speciﬁcations are subject to change without notice.

Document order number: 91-010997-010-100

Designed to ﬁt your home.

And your life.

other than speciﬁed access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling can

cause electric shock when the product is

subsequently used.

12. Do not overload wall outlets and extension

cords.

13. Unplug this product from the wall outlet

and refer servicing to an authorized service

facility under the following conditions:

• When the power supply cord or plug is

damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed to rain

or water.

• If the product does not operate normally

by following the operating instructions.

Adjust only those controls that are

covered by the operation instructions.

Improper adjustment of other controls

may result in damage and often requires

extensive work by an authorized

technician to restore the product to

normal operation.

• If the product has been dropped and

the charger and/or handset has been

damaged.

• If the product exhibits a distinct change in

performance.

14. Avoid using a telephone (other than

cordless) during an electrical storm. There

is a remote risk of electric shock from

lightning.

15. Do not use the telephone to report a gas

leak in the vicinity of the leak. Under certain

circumstances, a spark may be created when

the adapter is plugged into the power

outlet, or when the handset is replaced in

its cradle. This is a common event associated

with the closing of any electrical circuit.

The user should not plug the phone into a

power outlet, and should not put a charged

handset into the cradle, if the phone is

located in an environment containing

concentrations of ﬂammable or ﬂame-

supporting gases, unless there is adequate

ventilation. A spark in such an environment

could create a ﬁre or explosion. Such

environments might include: medical use

of oxygen without adequate ventilation;

industrial gases (cleaning solvents; gasoline

vapors; etc.); a leak of natural gas; etc.

16. Only put the handset next to your ear when

it is in normal talk mode.

17. The power adapter is intended to be

correctly oriented in a vertical or ﬂoor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

18. For pluggable equipment, the socket-outlet

shall be installed near the equipment and

shall be easily accessible.

19. CAUTION: Use only the batteries indicated in

this manual. There may be a risk of explosion

if a wrong type of battery is used for the

handset. Use only the supplied rechargeable

battery or replacement battery pack

(BT183342/BT283342) for the handset. Do

not dispose of batteries in a ﬁre. They may

explode. Dispose of used battery according

to the information in The RBRC® seal.

20. Use only the adapter included with this

product. Incorrect adapter polarity or

voltage can seriously damage the product.

Charger power adapter: Output:

6V AC @ 300mA.

SAVE THESE INSTRUCTIONS

Battery

• Use only the battery provided or equivalent.

To order a replacement, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

• Do not dispose of the battery in a ﬁre. Check

with local waste management codes for

special disposal instructions.

• Do not open or mutilate the battery. Released

electrolyte is corrosive and may cause burns

or injury to the eyes or skin. The electrolyte

may be toxic if swallowed.

• Exercise care in handling batteries in order

not to create a short circuit with conductive

materials.

• Charge the battery provided with this product

only in accordance with the instructions and

limitations speciﬁed in this manual.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital

cordless telephones):

Wireless Technology Research, LLC (WTR),

an independent research entity, led a

multidisciplinary evaluation of the interference

between portable wireless telephones and

implanted cardiac pacemakers. Supported by

the U.S. Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at least six

inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

• Should use the wireless telephone at the ear

opposite the pacemaker.

WTR’s evaluation did not identify any risk

to bystanders with pacemakers from other

persons using wireless telephones.

About cordless telephones

• Privacy: The same features that make a

cordless telephone convenient create some

limitations. Telephone calls are transmitted

between the telephone base and the

cordless handset by radio waves, so there

is a possibility that the cordless telephone

conversations could be intercepted by radio

receiving equipment within range of the

cordless handset. For this reason, you should

not think of cordless telephone conversations

as being as private as those on corded

telephones.

• Electrical power: The telephone base of this

cordless telephone must be connected to a

working electrical outlet. The electrical outlet

should not be controlled by a wall switch.

Calls cannot be made from the cordless

handset if the telephone base is unplugged,

switched off or if the electrical power is

interrupted.

• Potential TV interference: Some cordless

telephones operate at frequencies that may

cause interference to televisions and VCRs.

To minimize or prevent such interference, do

not place the telephone base of the cordless

telephone near or on top of a TV or VCR.

If interference is experienced, moving the

cordless telephone farther away from the

TV or VCR often reduces or eliminates the

interference.

• Rechargeable batteries: Exercise care in

handling batteries in order not to create a

short circuit with conducting material such

as rings, bracelets and keys. The battery or

conductor may overheat and cause harm.

Observe proper polarity between the battery

and the battery charger.

• Nickel-metal hydride rechargeable batteries:

Dispose of these batteries in a safe manner.

Do not burn or puncture the battery. Like

other batteries of this type, if burned or

punctured, they could release caustic material

which could cause injury.

The RBRC® seal

The RBRC® seal on the nickel-metal hydride

battery indicates that VTech Communications,

Inc. is voluntarily participating in an industry

program to collect and recycle these batteries

at the end of their useful lives, when taken out

of service within the United States and Canada.

The RBRC® program provides a convenient

alternative to placing used nickel-metal hydride

batteries into the trash or municipal waste,

which may be illegal in your area.

VTech’s participation in RBRC® makes it easy

for you to drop off the spent battery at local

retailers participating in the RBRC® program or

at authorized VTech product service centers.

Please call ® for information 1 (800) 8 BATTERY

on Ni-MH battery recycling and disposal bans/

restrictions in your area. VTech’s involvement

in this program is part of its commitment to

protecting our environment and conserving

natural resources.

RBRC® and 1 (800) 8 BATTERY® are registered

trademarks of Rechargeable Battery Recycling

Corporation.

FCC and IC regulations

FCC Part 15

NOTE: This equipment has been tested and

found to comply with the requirements for

a Class B digital device under Part 15 of the

Federal Communications Commission (FCC)

rules. These requirements are intended to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

WARNING: Changes or modiﬁcations to this

equipment not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference

that may cause undesired operation. Privacy

of communications may not be ensured when

using this telephone.

To ensure safety of users, the FCC has

established criteria for the amount of radio

frequency energy that can be safely absorbed

by a user or bystander according to the

intended usage of the product. This product

has been tested and found to comply with

the FCC criteria. The telephone base shall be

installed and used such that parts of the user’s

body other than the hands are maintained at a

distance of approximately 20 cm (8 inches) or

more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

FCC Part 68 and ACTA

This equipment complies with Part 68 of the

FCC rules and with technical requirements

adopted by the Administrative Council for

Terminal Attachments (ACTA). The label on the

back or bottom of this equipment contains,

among other things, a product identiﬁer in

the format US:AAAEQ##TXXXX. This identiﬁer

must be provided to your telephone service

provider upon request.

The plug and jack used to connect this

equipment to premises wiring and the

telephone network must comply with

applicable Part 68 rules and technical

requirements adopted by ACTA. A compliant

telephone cord and modular plug is provided

with this product. It is designed to be

connected to a compatible modular jack that

is also compliant. An RJ11 jack should normally

be used for connecting to a single line and

an RJ14 jack for two lines. See the installation

instructions in the user’s manual.

The Ringer Equivalence Number (REN) is

used to determine how many devices you

may connect to your telephone line and still

have them ring when you are called. The

REN for this product is encoded as the 6th

and 7th characters following the US: in the

product identiﬁer (e.g., if ## is 03, the REN

is 0.3). In most, but not all areas, the sum of

all RENs should be ﬁve (5.0) or less. For more

information, please contact your telephone

service provider.

This equipment must not be used with Party

Lines. If you have specially wired alarm dialing

equipment connected to your telephone

line, ensure the connection of this equipment

does not disable your alarm equipment. If you

have questions about what will disable alarm

equipment, consult your telephone service

provider or a qualiﬁed installer.

If this equipment is malfunctioning, it must be

unplugged from the modular jack until the

problem has been corrected. Repairs to this

telephone equipment can only be made by the

manufacturer or its authorized agents. For repair

procedures, follow the instructions outlined

under the .Limited warranty

If this equipment is causing harm to the

telephone network, the telephone service

provider may temporarily discontinue your

telephone service. The telephone service

provider is required to notify you before

interrupting service. If advance notice is

not practical, you will be notiﬁed as soon as

possible. You will be given the opportunity to

correct the problem and the telephone service

provider is required to inform you of your right

to ﬁle a complaint with the FCC. Your telephone

service provider may make changes in its

facilities, equipment, operation, or procedures

that could affect the proper functioning of

this product. The telephone service provider

is required to notify you if such changes are

planned.

If this product is equipped with a corded or

cordless handset, it is hearing aid compatible.

If this product has memory dialing locations,

you may choose to store emergency telephone

numbers (e.g., police, ﬁre, medical) in these

locations. If you do store or test emergency

numbers, please: Remain on the line and brieﬂy

explain the reason for the call before hanging

up.

Perform such activities in off-peak hours, such

as early morning or late evening.

Industry Canada

This device complies with Industry Canada

licence-exempt RSS standard(s).

Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference

that may cause undesired operation.

Privacy of communications may not be ensured

when using this telephone.

The term ‘’IC:‘’ before the certiﬁcation/

registration number only signiﬁes that the

Industry Canada technical speciﬁcations were

met.

The Ringer Equivalence Number (REN) for this

terminal equipment is NAN. The REN indicates

the maximum number of devices allowed to

be connected to a telephone interface. The

termination of an interface may consist of any

combination of devices subject only to the

requirement that the sum of the RENs of all the

devices not exceed ﬁve.

Remark: The word “NAN” means “Not

Applicable”.

This product meets the applicable Innovation,

Science and Economic Development Canada

technical speciﬁcations.

California Energy Commission

battery charging testing instructions

This telephone is set up to comply with the

energy-conserving standards right out of

the box. These instructions are intended for

California Energy Commission (CEC) compliance

testing only. When the CEC battery charging

testing mode is activated, all telephone

functions, except battery charging, will be

disabled.

When ﬁrst purchased and properly installed

for charging (see Install the battery), put the

handset on the charger to charge. The CEC

battery charging testing mode is activated

while charging.

If you have registered the handset to SN5127/

SN5147 telephone base, below are the testing

instructions.

To activate the CEC battery charging testing

mode

1. Unplug the telephone base power

adapter from the power outlet. Make sure

all handsets are plugged with charged

batteries before proceeding.

2. While you press and hold PAGE, plug the

telephone base power adapter back to the

power outlet.

3. After about 20 seconds, the visual ringer

indicator light on the telephone base turns

on. Keep pressing until the visual PAGE

ringer indicator light starts ﬂashing. Release

PAGE and then press it again within 2

seconds.

When the phone successfully enters the CEC

battery charging testing mode, the visual ringer

indicator light turns off.

• When the phone fails to enter this mode,

repeat Step 1 through Step 3 above.

• The telephone base will be powered up

as normal if you fail to press within 2 PAGE

seconds in Step 3.

To deactivate the CEC battery charging testing

mode

1. Unplug the telephone base power adapter

from the power outlet, then plug it back in.

Then the telephone base is powered up as

normal.

2. Register your handsets back to the

telephone base. Refer to the Add and

of this manual.

For C-UL compliance only

Mesures de sécurité importantes

Aﬁn de réduire les risques d’incendie, de

blessures corporelles ou d’électrocution, suivez

toujours ces mesures préventives de base

lorsque vous utilisez votre téléphone :

1. Lisez et comprenez bien toutes les

instructions.

2. Observez toutes les instructions et mises en

garde inscrites sur l’appareil.

3. Débranchez ce téléphone de la prise murale

avant de le nettoyer. N’utilisez pas de

nettoyeurs liquides ni en aérosol. N’utilisez

qu’un chiffon doux et légèrement humecté.

4. N’utilisez pas ce produit près de l’eau, tel

que près d’un bain, d’un lavabo, d’un évier

de cuisine, d’un bac de lavage ou d’une

piscine, ou dans un sous-sol humide ou sous

la douche.

5. Ne déposez pas ce téléphone sur un chariot,

support ou table chancelants. L’appareil

pourrait tomber et être sérieusement

endommagé.

6. Évitez d’installer le système téléphonique

dans les endroits soumis à une température

extrême, à la lumière directe du soleil ou

à proximité immédiate d’autres appareils

électriques ou électroniques. Protégez votre

téléphone contre les sources d’humidité,

la poussière, les vapeurs et les liquides

corrosifs.

7. Le boîtier de l’appareil est doté de fentes

et d’ouvertures d’aération situées à

l’arrière ou en dessous. Aﬁn d’empêcher la

surchauffe, ces ouvertures ne doivent pas

être obstruées en plaçant l’appareil sur un

lit, divan, tapis ou autre surface similaires.

Ne placez pas cet appareil à proximité d’un

élément de chauffage ni d’une plinthe

électrique. De plus, ne l’installez pas dans

une unité murale ou un cabinet fermé qui ne

possède pas d’aération adéquate.

8. Ne faites fonctionner cet appareil

qu’avec le type d’alimentation indiqué

sur les étiquettes de l’appareil. Si vous

ne connaissez pas le voltage de votre

maison, consultez votre marchand ou votre

fournisseur d’électricité.

9. Ne déposez rien sur le cordon

d’alimentation. Installez cet appareil dans un

endroit sécuritaire, là où personne ne pourra

trébucher sur la ligne d’alimentation ni le

cordon téléphonique modulaire.

10. N’insérez jamais d’objets à travers les

fentes et ouvertures de cet appareil, car ils

pourraient toucher à des points de tension

dangereux ou court-circuiter des pièces,

ce qui constituerait un risque d’incendie ou

d’électrocution. N’échappez pas de liquides

dans l’appareil.

11. Aﬁn de réduire les risques d’électrocution,

ne démontez pas l’appareil, mais apportez-le

plutôt à un centre de service qualiﬁé s’il doit

être réparé. En enlevant le couvercle, vous

vous exposez à des tensions dangereuses

ou autres dangers similaires. Un remontage

inadéquat peut être à l’origine d’une

électrocution lors d’une utilisation ultérieure

de l’appareil. Débranchez l’appareil avant de

procéder au nettoyage. Utilisez un chiffon

humide et doux.

12. Ne surchargez pas les prises de courant et

les rallonges.

13. Débranchez cet appareil de la prise

de courant et communiquez avec le

département de service à la clientèle de

VTech dans les cas suivants :

• Lorsque le cordon d’alimentation est

endommagé ou écorché.

• Si du liquide a été échappé dans

l’appareil.

• Si l’appareil a été exposé à une source

d’humidité telle que la pluie ou l’eau.

• Si le produit ne fonctionne pas normale-

ment en respectant les instructions de

fonctionnement. Réglez uniquement les

commandes indiquées dans le les instruc-

tions de fonctionnement. Les réglages

incorrects des autres commandes pour-

raient provoquer un dommage qui pour-

rait exiger un travail exhaustif de la part

d’un technicien autorisé aﬁn de rétablir le

fonctionnement normal de l’appareil.

• Si le produit a été échappé et que le so-

cle et/ou le combiné a été endommagé.

• Si le produit afﬁche une nette diminution

de sa performance.

14. Évitez d’utiliser un téléphone (autre qu’un

sans ﬁl) pendant un orage. Les éclairs

peuvent être à l’origine d’une électrocution.

15. N’utilisez pas le téléphone pour rapporter

une fuite de gaz à proximité de la fuite. En

certaines circonstances, une ﬂammèche

pourrait être provoquée lorsque

l’adaptateur est branché à une prise de

courant, ou lorsque le combiné est déposé

sur le socle. Ceci est un événement commun

associé à la fermeture d’un circuit électrique.

L’utilisateur ne devrait pas brancher le

téléphone à une prise de courant, et ne

devrait pas déposer le combiné chargé sur

le socle, si le téléphone se trouve à proximité

d’un endroit comportant des concentrations

de gaz inﬂammables, à moins que la

ventilation soit adéquate. Une ﬂammèche

dans un tel endroit pourrait provoquer

un incendie ou une explosion. De tels

environnements peuvent comprendre: des

endroits où l’on utilise de l’oxygène médical

sans ventilation adéquate; des gaz industriels

(dissolvants de nettoyage, des vapeurs

d’essence, etc.); une fuite de gaz naturel, etc.

16. Ne placez que le combiné de votre

téléphone près de votre oreille lorsqu’en

mode de conversation.

17. Ces adaptateurs ont été conçus pour être

orientés en position verticale ou montés au

sol. Les broches ne sont pas conçues pour

maintenir l’adaptateur en place si celui-ci est

barnché dans une prise au plafond ou sous

une table/ armoire.

18. Pour les PRODUITS À BRANCHER À UNE

PRISE DE COURANT, la prise de courant doit

être installée près du produit, aﬁn d’assurer

une accessibilité sécuritaire à la prise de

courant.

19. MISE EN GARDE: Il peut y avoir un risque

d’explosion si vous utilisez le mauvais

type de piles pour le téléphone. N’utilisez

que le bloc-piles rechargeable inclus ou

le bloc-piles de rechange (BT183342/

BT283342). N’incinérez pas les piles. Celles-ci

risqueraient d’exploser. Jetez les piles usées

selon les renseignements suivant le sceau du

RBRCMD.

20. N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont

la polarité ou la tension serait inadéquate

risque d’endommager sérieusement le

produit et mettre votre sécurité en péril.

Adaptateur:

Sortie : 6 V CA 300 mA

CONSERVEZ CES INSTRUCTIONS

Pile

• N’utilisez que la pile incluse ou l’équivalent.

Pour commander une pile de recharge,

visitez notre site Web au

www.vtechphones.com ou composez le

1-800-595-9511. Au Canada, visitez le

www.vtechcanada.com ou composez le

1-800-267-7377.

• Ne jetez pas la pile au feu. Vériﬁez les

instructions spéciﬁques de mise aux rebus

auprès des autorités locales.

• N’ouvrez pas et ne mutilez pas la pile.

L’électrolyte qui s’en échapperait est corrosif

et pourrait causer des brûlures ou des

blessures aux yeux ou à la peau. L’électrolyte

est toxique si avalé.

• Soyez prudents lorsque vous manipulez

les piles aﬁn d’éviter les courts-circuits

provoqués par des matériaux conducteurs.

• Rechargez la pile incluse avec cet appareil,

selon les instructions et limites spéciﬁées dans

ce guide d’utilisation.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (s’applique

uniquement aux téléphones numériques sans

ﬁl) :

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une ﬁrme de recherche indépendante,

a mené une évaluation pluridisciplinaire

des interférences entre les téléphones sans

ﬁl portatifs et les stimulateurs cardiaques

implantés dans l’organisme. Appuyée par

l’Administration des aliments et drogues (FDA)

des États-Unis, la ﬁrme WTR recommande aux

médecins :

Avis aux détenteurs de stimulateurs cardiaques

• Ils doivent tenir le téléphone sans ﬁl à une

distance d’au moins six pouces du stimulateur

cardiaque.

• Ils ne doivent PAS placer le téléphone sans

ﬁl directement sur le stimulateur cardiaque,

tel que dans une poche de chemise, lorsque

celui-ci est en marche.

• Ils doivent utiliser le téléphone sans ﬁl en

l’appuyant sur l’oreille qui se trouve dans la

direction opposée au stimulateur cardiaque.

L’étude effectuée par l’organisme WRS n’a

pas identiﬁé de risque pour les détenteurs de

simulateurs cardiaques causés par les gens qui

utilisent un téléphone sans ﬁl à proximité de

ceux-ci.

À propos des téléphones sans ﬁl

• Conﬁdentialité : Les mêmes caractéristiques

qui constituent des avantages pour les

téléphones sans ﬁl afﬁchent également

des restrictions. Les appels téléphoniques

sont transmis entre le combiné sans ﬁl et

le socle par le biais d’ondes radio ; il y a

donc la possibilité que vos conversations

téléphoniques sans ﬁl soient interceptées

par des équipements de réception radio

se trouvant dans la portée du combiné sans

ﬁl. Pour cette raison, vous ne devez pas

percevoir les communications téléphoniques

sans ﬁl comme étant aussi conﬁdentielles que

celles des téléphones à cordons.

• Alimentation électrique : Le socle de ce

téléphone sans ﬁl doit être branché à une

prise électrique fonctionnelle. La prise

électrique ne doit pas être contrôlée par un

interrupteur mural. Les appels ne pourront

pas être effectués du combiné sans ﬁl si le

socle est débranché ou mis hors tension ou si

le courant est coupé.

• Possibilité d’interférences aux téléviseurs :

Certains téléphones sans ﬁl fonctionnent

sur des fréquences pouvant causer des

interférences aux téléviseurs et aux

magnétoscopes. Pour réduire ou prévenir de

telles interférences, ne placez pas le socle du

téléphone sans ﬁl près ou sur un téléviseur ou

magnétoscope. S’il y a présence de parasites,

il est conseillé d’éloigner le téléphone sans

ﬁl du téléviseur ou du magnétoscope aﬁn de

réduire possiblement les interférences.

• Piles rechargeables : Manipulez les piles avec

soin aﬁn de ne pas les court-circuiter avec

des bagues, bracelets ou clés. Les piles ou le

conducteur peut surchauffer et causer des

blessures. Respectez la polarité adéquate

entre la pile et le chargeur.

• Les bloc-piles rechargeables à l’hydrure

métallique de nickel : Jetez ces blocs-piles

de manière écologique et sécuritaire. Ne les

incinérez pas et ne les percez pas. Tel que

les autres piles de ce type, elles pourraient

dégager une matière toxique qui peut causer

des blessures corporelles si elles sont brûlées

ou percées.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product

warrants to the holder of a valid proof of

purchase (“Consumer” or “you”) that the

Product and all accessories provided in the

sales package (“Product”) are free from defects

in material and workmanship, pursuant to the

following terms and conditions, when installed

and used normally and in accordance with the

Product operating instructions. This limited

warranty extends only to the Consumer for

Products purchased and used in the United

States of America and Canada.

What will VTech do if the Product is not free

from defects in materials and workmanship

during the limited warranty period (“Materially

Defective Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair

or replace at VTech’s option, without charge,

a Materially Defective Product. If we repair

the Product, we may use new or refurbished

replacement parts. If we choose to replace

the Product, we may replace it with a new or

refurbished Product of the same or similar

design. We will retain defective parts, modules,

or equipment. Repair or replacement of the

Product, at VTech’s option, is your exclusive

remedy. VTech will return the repaired or

replacement Products to you in working

condition. You should expect the repair or

replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product

extends for ONE (1) YEAR from the date

of purchase. If VTech repairs or replaces a

Materially Defective Product under the terms of

this limited warranty, this limited warranty also

applies to the repaired or replacement Product

for a period of either (a) 90 days from the date

the repaired or replacement Product is shipped

to you or

(b) the time remaining on the original

one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse,

accident, shipping or other physical

damage, improper installation, abnormal

operation or handling, neglect, inundation,

ﬁre, water or other liquid intrusion; or

2. Product that has been damaged due

to repair, alteration or modiﬁcation by

anyone other than an authorized service

representative of VTech; or

3. Product to the extent that the problem

experienced is caused by signal conditions,

network reliability, or cable or antenna

systems; or

4. Product to the extent that the problem is

caused by use with non-VTech accessories;

5. Product whose warranty/quality stickers,

product serial number plates or electronic

serial numbers have been removed, altered

or rendered illegible; or

6. Product purchased, used, serviced, or

shipped for repair from outside the United

States of America or Canada, or used

for commercial or institutional purposes

(including but not limited to Products used

for rental purposes); or

7. Product returned without a valid proof of

purchase (see item 2 on the next page); or

8. Charges for installation or set up, adjustment

of customer controls, and installation or

repair of systems outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please

visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review

the user’s manual - a check of the Product’s

controls and features may save you a service

call.

Except as provided by applicable law, you

assume the risk of loss or damage during

transit and transportation and are responsible

for delivery or handling charges incurred in

the transport of the Product(s) to the service

location. VTech will return repaired or

replaced Product under this limited warranty.

Transportation, delivery or handling charges

are prepaid. VTech assumes no risk for damage

or loss of the Product in transit. If the Product

failure is not covered by this limited warranty, or

proof of purchase does not meet the terms of

this limited warranty, VTech will notify you and

will request that you authorize the cost of repair

prior to any further repair activity. You must pay

for the cost of repair and return shipping costs

for the repair of Products that are not covered

by this limited warranty.

Important safety instructions

When using your telephone equipment, basic

safety precautions should always be followed to

reduce the risk of ﬁre, electric shock and injury,

including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked

on the product.

3. Unplug this product from the wall outlet

before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning

4. Do not use this product near water such as

near a bath tub, wash bowl, kitchen sink,

laundry tub or a swimming pool, or in a wet

basement or shower.

5. Do not place this product on an unstable

table, shelf, stand or other unstable surfaces.

6. Avoid placing the telephone system in

places with extreme temperature, direct

sunlight, or other electrical devices. Protect

your phone from moisture, dust, corrosive

liquids and fumes.

7. Slots and openings in the back or bottom

of the charger and handset are provided

for ventilation. To protect them from

overheating, these openings must not be

blocked by placing the product on a soft

surface such as a bed, sofa or rug. This

product should never be placed near or

over a radiator or heat register. This product

should not be placed in any area where

proper ventilation is not provided.

8. This product should be operated only from

the type of power source indicated on the

marking label. If you are not sure of the type

of power supply in your home or ofﬁce,

consult your dealer or local power company.

9. Do not allow anything to rest on the power

cord. Do not install this product where the

cord may be walked on.

10. Never push objects of any kind into this

product through the slots in the charger or

handset because they may touch dangerous

voltage points or create a short circuit. Never

spill liquid of any kind on the product.

11. To reduce the risk of electric shock, do not

disassemble this product, but take it to

an authorized service facility. Opening or

removing parts of the charger or handset

What must you return with the Product to get

warranty service?

1. Return the entire original package and

contents including the Product to the VTech

service location along with a description of

the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales

receipt) identifying the Product purchased

(Product model) and the date of purchase or

receipt; and

3. Provide your name, complete and correct

mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech.

It supersedes all other written or oral

communications related to this Product. VTech

provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s

responsibilities regarding the Product. There

are no other express warranties. No one is

authorized to make modiﬁcations to this limited

warranty and you should not rely on any such

modiﬁcation.

State/Provincial Law Rights: This warranty gives

you speciﬁc legal rights, and you may also have

other rights, which vary from state to state or

province to province.

Limitations: Implied warranties, including

those of ﬁtness for a particular purpose and

merchantability (an unwritten warranty that

the Product is ﬁt for ordinary use) are limited

to one year from the date of purchase. Some

states/provinces do not allow limitations on how

long an implied warranty lasts, so the above

limitation may not apply to you. In no event

shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages

(including, but not limited to lost proﬁts or

revenue, inability to use the Product or other

associated equipment, the cost of substitute

equipment, and claims by third parties)

resulting from the use of this Product. Some

states/provinces do not allow the exclusion

or limitation of incidental or consequential

damages, so the above limitation or exclusion

may not apply to you.

Please retain your original sales receipt as

proof of purchase.

Technical speciﬁcations

Frequency

control

Crystal controlled PLL

synthesizer

Transmit

frequency

1921.536-1928.448 MHz

Channels 5

Nominal

effective

range

Maximum power allowed by

FCC and IC. Actual operating

range may vary according to

environmental conditions at the

time of use.

Power

requirements

Battery:

2.4V 400mAh,

Ni-MH battery pack

Power adapter:

6V AC @ 300mA

Product specificaties

Merk:	VTech
Categorie:	Telefoon
Model:	SN5307

Heb je hulp nodig?

Als je hulp nodig hebt met VTech SN5307 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon VTech

VTech CS5119-16 Handleiding

27 Februari 2024

VTech DS6101 Handleiding

27 Februari 2024

VTech CS6649-2 Handleiding

25 Juli 2023

VTech CS6419 Handleiding

17 Juni 2023

VTech CareLine SN6307 Handleiding

15 Juni 2023

VTech DS6071 Handleiding

2 Juni 2023

VTech CareLine SN6147 Handleiding

9 Mei 2023

VTech LS6405 Handleiding

8 Mei 2023

VTech VC7151 Handleiding

2 Mei 2023

VTech SN5307 Handleiding

30 April 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

Samsung SGH-E490 Handleiding

16 April 2024

Gamdias Pheme M1 Handleiding

16 April 2024

Tador KX-T927-MT Handleiding

13 April 2024

Essentiel B Nivalis 15.1 Handleiding

9 April 2024

Essentiel B Nivalis 15.2 Handleiding

9 April 2024

Geemarc PhotoPHONE 110 Handleiding

9 April 2024

Lindy 42980 Handleiding

9 April 2024

Geemarc SOS-PRO 595 Handleiding

9 April 2024

Geemarc ClearSound CL60 Handleiding

8 April 2024

Geemarc DALLAS10 Handleiding

8 April 2024