VTech DS6071 Handleiding

VTech Telefoon DS6071

Lees hieronder de 📖 handleiding in het Nederlandse voor VTech DS6071 (9 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
DS6071/DS6071-17/
DS607V-1F/DS607V-1G/
DS607V-1H/DS607V-1J
DECT 6.0 accessory handset
for use with VTech models
DS6670/DS6671/DS6672/
DS667V
User’s manual
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.
Congratulations
on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 5 of this manual.
This manual has instructions on how to set up and register your new handset.
For abridged instructions on using the handset, see the Abridged user’s manual
that came with your telephone base.
You may also view or download the online Complete user’s manual for a full
set of installation and operation instructions at www.vtechphones.com.
In Canada, visit www.vtechcanada.com.
BC
Register online to get an additional 3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for enhanced warranty support.
Product news
Learn about the latest VTech products.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
2
Parts checklist
Your telephone package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
User’s manualHandset battery
Handset battery
compartment cover
Handset charger and
charger adapter
Handset
Ba tte ry Pa c k / Bl o c-p i le s :
(2. 4V Ni -MH )
WARN IN G / AVERT I S SEM ENT :
DO N O T BU RN O R P UN CT U RE BAT T ER IES .
NE P AS IN CI NÉR ER O U P ERCER LES P ILES .
Ma d e in Ch in a / Fab r iq u é en ch in e
T HIS SIDE UP / CE CÔ T É VERS LE HAUT
User’s manual
ECO mode
This power conserving technology reduces power
consumption for optimal battery performance.
The ECO mode activates automatically during calls.
When this mode is on, the handset displays .ECO
ECO
Home 0:00:01
10:15 PM
12/18
ECO
Battery installation
Install the battery as shown below.
Ba tte ry Pa ck / Bl oc -pi le s :
(2. 4V Ni- MH)
WARNIN G / AVER TI S S EM ENT :
DO NO T B UR N O R PUN CT URE B ATT ER IE S .
NE P AS IN CINÉ RE R O U P ER CE R LE S PI LES .
Ma de i n Ch in a / Fab riq u é e n ch in e
TH IS SID E UP / CE CÔT É VERS LE HAU T
CR1232
Ba tte ry Pa ck / Bl oc -pi le s :
(2. 4V Ni- MH)
WARNIN G / AVER TI S S EM ENT :
DO NO T B UR N O R PUN CT URE B ATT ER IE S .
NE P AS IN CINÉ RE R O U P ER CE R LE S PI LES .
Ma de i n Ch in a / Fab riq u é e n ch in e
TH IS SID E UP / CE CÔT É VERS LE HAU T
CR1232
Plug the battery connector securely
into the socket.
1. Place the battery with the label
THIS SIDE UP facing up and
the wires inside the battery
compartment.
2.
Slide the battery compartment cover
towards the center of the handset until
it clicks into place.
3. Place the handset in the telephone
base or charger to charge.
4.
CHARGE light
remains on when
charging.
If the handset will not be used for a long time, disconnect and remove the battery
to prevent possible leakage.
To purchase a replacement battery, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
3
Battery charging
Once you have installed the battery, the screen indicates the battery status
(see the table below). For best performance, keep the handset in the telephone
base or charger when not in use. The battery is fully charged after 12 hours of
continuous charging.
Battery indicators Battery status Action
The screen is blank, or
displays Put in charger
and flashes.
The battery has no or very little
charge. The handset cannot
be used.
Charge without interruption
(at least 30 minutes).
The screen displays
Low battery and flashes.
The battery has enough charge
to be used for a short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X.
The battery is charged. To keep the battery
charged, place it in the
telephone base or charger
when not in use.
When it is fully charged, you can expect the following performance:
Operation Operating time
While in handset use (talking*) Seven hours
While in speakerphone mode (talking*) Three hours and 30 minutes
While not in use (standby**) Five days
* Operating times vary depending on your actual use and the age of the battery.
** Handset is not charging or in use.
If you place the handset in the telephone base or charger without plugging in the
battery, the screen displays .No battery
Add and register a handset
This telephone system accommodates up to 12 devices, including a maximum of
two DECT 6.0 headsets. The telephone base recognizes and counts a headset the
same as a handset.
You can add new handsets ( /DS6071 DS6071-17 DS607V-1F/ /DS607V-1G/
DS607V-1H DS607V-1J/ , purchased separately) to your telephone system. Each
handset must be registered with the telephone base before use. Additional
handsets registered to the telephone base are assigned numbers in the sequential
order.
When first purchased and properly charged, each expansion handset shows
To register HS, see manual. Charge the handset before registering it to the
telephone base.
To register a handset:
Place the new/non-registered handset in the telephone base.
The handset shows Registering... Please wait Handset X Registered, then
and you hear a beep when the registration process completes. The registration
process takes about 90 seconds to complete.
1.
2.
Do not place the handset
in the charger.


Product specificaties

Merk: VTech
Categorie: Telefoon
Model: DS6071

Heb je hulp nodig?

Als je hulp nodig hebt met VTech DS6071 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Telefoon VTech

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon