VTech RM5854HD Handleiding

Bekijk gratis de handleiding van VTech RM5854HD (2 pagina’s), behorend tot de categorie Médialejátszó. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over VTech RM5854HD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

latest VTech product news.

Congratulations

on purchasing your new VTech product. Before using this HD video monitor, please read

Important safety instructions.

For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, visit www.vtechcanada.com.

FrequencyBaby unit: 2412 - 2462 MHz

Channels11

LCD5’’ Color LCD

(IPS 1280x720 pixels)

Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirementParent unit/Baby unit power adapters:

VTech, VT05EUS05100

Rated output: 5V DC, 1000mA.

Parent unit battery: BP1763 (3.8V 2100mAh Lithium-ion battery)

ZhongShan Tianmao battery Co. Ltd.

Specifications are subject to change without notice.

© 2021 VTech Communications, Inc.

All rights reserved. 04/21. RM5854-XHD_QSG_V1

Technical specifications

Android

TM

and Google Play

TM

are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CONFORMS TO

RM5854HD

RM5854-2HD

5-inch Smart Wi-Fi 1080p

Video Monitor

What does HD Video Monitor do?

VTech 5-inch Smart Wi-Fi 1080p Video Monitor allows you to stay close to your baby when you

are on the move or away.

This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and

audio through the HD baby unit and 5-inch color screen parent unit. It allows you to maintain a

constant connection to your baby.

You can also monitor from your smartphone and mobile tablet.

VTech 5-inch Smart Wi-Fi 1080p Video Monitor uses MyVTech Baby Pro app to let you instantly

see and hear what’s happening with your baby from anywhere in the world.

The app can be downloaded from the App Store or the Google Play

TM

Store, directly from your

smartphone or mobile tablet.

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss

resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no

responsibility for any loss or claims by third parties that may arise through the use of this product.

Company: VTech Communications, Inc.

Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States

Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

Quick start guide

RM5854HD

RM5854-2HD

For more support information

S

m

Direct mode

The parent unit and the baby unit of your video monitor connect to each others in Direct mode

by default, which allows you to stream live video right out of the box. Direct mode connection

lets you stream live video from parent unit only.

• You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are

obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to

improve the signal strength. You can also set up Router modeto connect via your home Wi-Fi network to

improve the connection between your parent unit and baby unit.

Router mode

You can continue using your video monitor

with Direct mode connection, or you

can set up your monitor in Router mode

connection.

Router modeuses your home Wi-Fi

network to connect your video monitor.

It supports streaming live video through

parent unit and smartphone app.

We recommend that you set up your

monitor in Router mode to enjoy streaming

live video via your parent unit with better

connection.

If you want to stream live video remotely with your mobile device, download and install the

MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included) provides

Internet connectivity to your HD video monitor system. It serves as a communicating channel

between your baby unit and mobile device, allowing you to monitor and/or control your baby

unit wherever you are. For detail, see Download app for mobile access section in this quick start

guide.

• Your parent unit detects the connection signal strength. If you have connected your video monitor with

your home Wi-Fi network, your parent unit automatically switches to direct or router mode - the one that

has stronger signal strength.

• When both parent unit and app are viewing the camera simultaneously, the video quality will be

optimised to deliver the best possible viewing result.

Overview

What’s in the box

Connect, charge and power on the baby monitor

Protect your privacy and online security

x 2

x 2

Quick start guide

Your HD video monitor package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

How the system works

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of

industry-recommended best practices to help keep your wireless connection private and

your devices protected when online. We recommend you carefully review and consider

complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting

the “WPA2-PSK with AES” setting in your router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This

will ensure you always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other

network devices to open inbound ports without any intervention or approval from you.

A virus or other malware program could use this function to compromise security for the

entire network.

For more information on wireless connections and protecting your data, please review the

following resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips

–

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a New Computer to the

Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-fi.org/discover-wi-fi/security.

Parent unit icons

For mobile access:

MyVTech Baby Pro mobile app

NetworkWi-Fi

Wi-Fi router2.4GHz 802.11 b/g/n

Internet connection

1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Main

Menu

Options

Monitoring mode (* For RM5854-2HD only)

• View baby unit 1 or 2 in Single

mode.

• View both baby units in Patrol

mode.

• View both baby units in Split

screen.

Nigh light

• Select color 1, 2 or 3.

• Turn off night light.

Melodies and soothing sounds

• Select play all melodies, or play

one of the five melodies and

four soothing sounds.

• You can also set the timer to

stop playing after 15, 30 or 60

minutes, or playing non-stop.

Alerts - Sound, motion and temperature

• Select the sound and motion

sensitivity level.

• Turn on/off sound and motion

detection alerts.

• Select maximum and minimum

temperature for alert range.

• Turn on/off temperature alert.

• Turn on/off Auto Wake Up

function.

Parent unit settings

• Adjust parent unit screen

brightness.

• Turn on/off dim mode.

Baby unit settings

• Turn on/off Night Vision.

• Turn on/off baby unit’s status LED.

• Adjust baby unit’s speaker

volume.

• Update baby unit’s security key.

Main

Menu

Options

General settings

• Connect to home Wi-Fi network.

• Turn on/off Parent unit Wi-Fi

Connection.

• Connect mobile phone.

• Turn on/off Low Battery Alert Tone.

• Turn on/off No Link Alert Tone.

• Reset Settings to factory default.

• Software Update.

Baby unit overview

1Light sensor

2Camera lens

3Microphone

4Infrared LEDs

• Allow you to see clearly in a dark surrounding.

5Speaker

6

• Press to turn the night light on or off.

7LED indicator

• Orange is steady on when the baby unit

is connecting to the parent unit in direct

mode.

• Green is steady on when the baby unit and

parent unit are connecting to your home

Wi-Fi network via the Wi-Fi router.

• Flashes orange slowly during video

streaming in direct mode.

• Flashes green slowly during video

streaming via home Wi-Fi network.

8ON

• Power on/off switch.

9PAIR

• Press and hold for three seconds to enter

pairing mode.

• Reset the baby unit to factory default.

1. Press and hold PAIR key until you hear

a beep sound.

2. Release the PAIR key, and then press

the PAIR key again five times until you

hear another beep sound.

3. The baby unit will sound another beep

when the reset completes. Then, the

baby unit will reboot.

10

Night light

11Temperature sensor

12Slots for wall mounting

• Wall mount bracket is included in your

package.

13Power jack

1

2

3

4

5

6

7

8

9

10

12

13

11

1

2

3

4

5

6

7

8

9

10

12

13

11

1

2

3

4

5

6

7

8

9

10

12

13

11

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery before use

The parent unit runs on rechargeable battery or AC power. To continuously monitor your

baby, keep the parent unit connected to AC power. With the battery alone, the parent unit

can cordlessly run for a short time only.

• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When

the parent unit battery is fully charged, the battery icon becomes solid .

• The standby time varies depending on your actual use.

After the parent unit is fully charged, press POWER until the welcoming screen appears.

The battery icon indicates the battery status (see the following table).

Battery indicatorsBattery statusAction

The screen displays and

. The light flashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully

charged.

To keep the battery charged, connect

it to AC power when not in use.

Raise the parent unit antenna for better reception

Slide the switch to ON to power on your baby unit.

• When powering up, the baby unit’s status LED turns on.

It will turn off after a while and keeps off.

• The status LED is set to off by default. If you want to

keep the LED on, press MENU, then go to

> Status LED and turn it on.

1 set for RM5854HD

2 sets for RM5854-2HD

Status icons

Direct mode

Parent unit, baby unit 1 and baby unit 2

(*For RM5854-2HD only) are connected to

each others directly.

Router mode

Parent unit, baby unit 1 and baby unit 2

(*For RM5854-2HD only) are connected to

home Wi-Fi network.

Baby unit 1 and 2 are being viewed in

Patrol mode (*For RM5854-2HD only).

Baby unit 1 and 2 are being viewed in

Split mode (*For RM5854-2HD only).

Night vision is turned on.

Motion alert is turned on.

Sound detection alert is turned on.

Melodies and soothing sounds are turned

on.

Night light is turned on.

Parent unit speaker is muted.

Temperature alert is turned on.

NOTE:

Camera lens and surface may get

warm during normal operation.

WARM

WARM

Parent unit overview

1LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2

LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Off when the parent unit is

disconnected from AC power.

• Flashes when the parent unit battery is

low and needs charging.

33- level sound indicator light

• Green on when low sound level is

detected by the baby unit.

• Green and amber on when moderate

sound level is detected by the baby

unit.

• Green, amber and red on when high

sound level is detected by the baby

unit.

4

TALK /

• Press and hold to talk to the baby unit.

• While in a submenu, press to exit.

5

• Press to zoom in/out.

• While in a submenu, press to view the

help menu.

6Arrow keys

, , or

• Press to navigate leftward, upward,

rightward or downward, within the

main menu and submenus.

• While viewing zoomed image, press

to move the zoomed image leftward,

upward, rightward or downward.

7MENU/SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

8- VOL/ VOL +

• Increase or decrease parent unit’s

volume.

9Microphone

10Speaker

11POWER / LCD ON/OFF

12Power jack

13RESET

• Force reboot the parent unit.

14Antenna

15Stand

Local access

Mobile access

Enhanced local access

2

1

3

4

5

6

7

8

9

12

13

14

15

11

10

The applied nameplate is located at the bottom of the baby unit’s

base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and

injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 2

meters.

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be

used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water. For example, do not use

it next to a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement or shower.

7. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during use,

storage or transportation. Disposal of battery into fire or a hot

oven, or mechanically crushing or cutting or the battery can

result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of flammable liquid of gas. Battery

subjected to extremely low air pressure may result in an

explosion or the leakage of flammable liquid or gas. Dispose

of used battery according to the information in The RBRC seal.

8. Use only the adapters included with this product. Incorrect

adapter polarity or voltage can seriously damage the product.

Power adapter information:

Output: 5V DC 1000mA

VTech Telecommunications Ltd.

Model: VT05EUS05100

Rechargeable battery information:

3.8V 2100mAh Lithium-ion battery

ZhongShan Tianmao battery Co. Ltd.

Model: BP1763

9. The power adapter is intended to be correctly oriented in a

vertical or floor mount position. The prongs are not designed

to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power adapter)

shall be installed near the equipment and shall be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not cut off the power adapters to replace them with other

plugs, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supply in your home, consult your dealer or

local power company.

15. The equipment is to be supplied from an identified USB port

complying with the requirements of Limited Power Source.

16. Do not overload wall outlets or use an extension cord.

17. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

18. This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back or

bottom of this product are provided for ventilation. To protect

them from overheating, these openings must not be blocked

by placing the product on a soft surface such as a bed, sofa

or rug. This product should never be placed near or over a

radiator or heat register.

19. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage points

or create a short circuit. Never spill liquid of any kind on the

product.

20. To reduce the risk of electric shock, do not disassemble this

product, but take it to an authorized service facility. Opening

or removing parts of the product other than specified access

doors may expose you to dangerous voltages or other risks.

Incorrect reassembling can cause electric shock when the

product is subsequently used.

21. You should test the sound reception every time you turn on

the units or move one of the components.

22. Periodically examine all components

for damage.

23. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset the baby

monitor periodically by powering off and then powering on

the units, and power off the baby monitor if you will not use it

for some time.

24. Children should be supervised to ensure that they do not play

with the product.

25. The small parts of this monitor can be swallowed by babies or

small children. Keep these parts out of reach of children.

26. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 32

o

F and

104

o

F.

• Burn hazard, fire hazard, explosion hazard associated with

mishandling of the battery.

• Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

• Warning—Strangulation Hazard—Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 3 ft (0.9m) away).

Do not remove this tag.

• Never place the camera unit(s) inside the baby’s crib or

playpen. Never cover the camera unit(s) or parent unit with

anything such as a towel or a blanket.

• Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards regarding

electromagnetic fields (EMF). If handled properly and according

to the instructions in this user’s manual, the product is safe to be

used based on scientific evidence available today.

Important safety instructions

Install MyVTech Baby Pro mobile app

1. Browse the App Store or the Google Play store .

2. Search for the mobile app with the keyword “myvtech baby pro“.

3. Download and install the MyVTech Baby Pro mobile app to your mobile device.

OR

Scan the QR codes on the right to get the app.

• Make sure your mobile device meets the minimum

requirement for the mobile app.

Minimum requirement

The mobile app is compatible with:

• Android

TM

5.0 or later; and

• iOS 11.0 or later.

You can download the free MyVTech Baby Pro mobile app and install it

to a mobile device, then use your mobile device and the mobile app to

monitor your areas remotely.

1. Press MENU when the parent unit is idle.

2. Go to > Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your

mobile device.

4. Follow the instructions in the mobile app to set up and pair your baby

unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or

Google Play store.

1

Download app for mobile access

After installing the mobile app, follow the instructions in the mobile app and parent

unit to set up and pair your baby unit.

In your mobile device:

1. Tap to run the mobile app in your mobile device, and then create a user account.

2. We recommend that you use common webmail services, such as Google Gmail for

registration of your user account. Check your email (and Spam folder), and activate your

new camera account via the email link, then sign in to your account.

3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera in

the mobile app to get started.

2

Product specificaties