VTech RM5887HD Handleiding

Bekijk gratis de handleiding van VTech RM5887HD (2 pagina’s), behorend tot de categorie Médialejátszó. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over VTech RM5887HD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Transmit frequencyBaby unit: 2412 - 2462 MHz

Parent unit: 2412 - 2462 MHz

Channels11

LCD5’’ Color LCD

(IPS 1280x720 pixels)

Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirementBaby unit power adapter: Output: 5V DC, 1.5A.

Parent unit power adapter: Output: 5V DC, 2A.

Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Specifications are subject to change without notice.

© 2023 VTech Communications, Inc.

All rights reserved. 06/23. RM5887HD_US_QSG_V2

Technical specications

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting

from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility

for any loss or claims by third parties that may arise through the use of this product.

Company: VTech Communications, Inc.

Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States

Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CONFORMS TO

Android

TM

and Google Play

TM

are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Congratulations

on purchasing your new VTech product.

Before using this baby monitor, please read the Important safety instructions.

For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, visit www.vtechcanada.com.

RM5887HD

5” Smart Wi-Fi 1080p

Over-the-Crib Monitor

What does HD Video Monitor do?

Quick start guide

VTech 5” Smart Wi-Fi 1080p Video Monitor allows you to stay close to your baby when you

are on the move or away. This monitor is Wi-Fi enabled, using your home wireless network

to stream live video and audio through the 1080p baby unit and 5-inch color screen

parent unit. It allows you to maintain a constant connection to your baby.

You can also monitor from your smartphone or mobile tablet.

VTech 5” Smart Wi-Fi 1080p Video Monitor uses MyVTech Baby Pro app to let you

instantly see and hear what’s happening with your baby from anywhere in the world. The

app can be downloaded from the App Store or the Google Play

TM

Store.

Go towww.vtechphones.com

to register your product for

enhanced warranty support and

latest VTech product news.

RM5887HD

For more support information

S

m

Product Recycling

Recycle this product when you are done with it.

For more information, scan the QR code

or visit vtechphones.com/recycle.

VC2610 Floor Stand is available and sold separately.

For details, please visit: www.vtechphones.com

The applied nameplate is located at the bottom of the baby unit’s base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and

injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 6.5

feet (2 meters).

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be

used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to a

bath, sink, swimming pool or shower.

7. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during use,

storage or transportation. Disposal of battery in fire or a hot

oven, or mechanically crushing or cutting the battery can

result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of flammable liquid of gas. Battery

subjected to extremely low air pressure may result in an

explosion or the leakage of flammable liquid or gas. Dispose

of used battery according to the information in The RBRC seal.

8. Use only the adapters included with this product. Incorrect

adapter polarity or voltage can seriously damage the product.

Power adapter information:

Baby Unit Output: 5V DC 1.5A

VTech Telecommunications Ltd.

Model: VT07EUS05150

Parent Unit Output: 5V DC 2A

VTech Telecommunications Ltd.

Model: VT07EUS05200

Rechargeable battery information:

3.7V 5000mAh, 18.5Wh Lithium-ion battery

Zhuhai Great Power Energy Co., Ltd.

Model: GSP806090-5Ah-3.7V-1S1P

9. The power adapter is intended to be correctly oriented in a

vertical or floor mount position. The prongs are not designed

to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power adapter)

should be installed near the equipment and should be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not cut off the power adapters to replace them with other

plugs, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supply in your home, consult your dealer or

local power company.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

17. This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back or

bottom of this product are provided for ventilation. To protect

them from overheating, these openings must not be blocked

by placing the product on a soft surface such as a bed, sofa

or rug. This product should never be placed near or over a

radiator or heat source.

18. Never push objects of any kind into this product through the slots

because they may touch dangerous voltage points or create a

short circuit. Never spill liquid of any kind on the product.

19. To reduce the risk of electric shock, do not disassemble this

product, but take it to an authorized service facility. Opening

or removing parts of the product other than specified access

doors may expose you to dangerous voltages or other risks.

Incorrect reassembling can cause electric shock when the

product is subsequently used.

20. You should test the sound reception every time you turn on

the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset the baby

monitor periodically by powering off and then powering on

the units, and power off the baby monitor if you will not use

it for some time.

23. Children should be supervised to ensure that they do not play

with the product.

24. The small parts of this monitor can be swallowed by babies or

small children. Keep these parts out of reach of children.

25. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 32

o

F

(0

o

C) and 104

o

F (40

o

C).

• Mishandling batteries can cause burn, fire or explosion

hazards.

• Batteries should not be exposed to excessive heat such as

bright sunshine or fire.

• Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

• Warning—Strangulation Hazard—Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 3 ft (0.9m) away).

Do not remove warning label on the adapter cord.

• Never place the camera unit(s) inside the baby’s cot or

playpen. Never cover the camera unit(s) or parent unit with

anything such as a towel or a blanket.

• Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic elds (EMF)

This VTech product complies with all standards regarding

electromagnetic fields (EMF). If handled properly and according

to the instructions in this user’s manual, the product is safe to be

used based on scientific evidence available today.

Important safety instructions

What’s in the box

Quick start guide

Your baby monitor package contains the following items. Save your sales receipt and original

packaging in the event warranty service is necessary.

For mobile access:

MyVTech Baby Pro mobile app

NetworkWi-Fi

Wi-Fi router2.4GHz 802.11 b/g/n

Internet connection

1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

A

Mounting: second extension

Extension cover

Mounting cover

Cable cover

End cable cover

Cable cover screws

and anchors (wall plugs)

x 3

x 3

x 6

x 6

Wall mount screws

and anchors (wall plugs)

(inside bag with label)(inside bag with label)

H

I

Mounting bracket

(attach to wall part)

C

B

D

E

F

G

x 6

Parent Unit

Parent Unit adapter

(Output: 5V 2A)

Baby Unit

Baby Unit adapter

(Output: 5V 1.5A)

Extension cable

Mounting template

mount the baby unit

Install the Baby Unit onto the First extension, and connect the adapter to the end of the cable

and the power supply to power up the Baby Unit.

Install and power on the baby unit

Slide the switch to ON to power

your Baby Unit on.

• When powering up, the Baby Unit’s

status LED turns on. It will turn off

after a while and remains off.

• The status LED is set to off by default.

NOTE:

Camera lens and surface

may get warm during

normal operation.

WARM

WARM

Connect, charge and power on the parent unit

Charge the parent unit battery before use

The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep

the parent unit connected to AC power.

• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent

unit battery is fully charged, the battery icon becomes solid .

• The standby time varies depending on your actual use.

The parent unit turns on automatically after connecting to the power socket, and the welcome screen

appears. You can press

Power to turn the parent unit on or press and hold to turn it off.

The battery icon indicates the battery status (see the following table).

Battery indicatorsBattery statusAction

The screen displays and .

The LED light flashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about 30 minutes).

The battery icon becomes solid

.

The battery is fully

charged.

To keep the battery charged,

connect it to AC power

when in use.

Raise the parent unit

antenna for better

reception

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

• Connect the power adapters in a vertical or floor mount position only. The adapter prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapter may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Parent unit icons

Main

Menu

Options

Night light

• Turn on or turn off night light.

• Select a night light color.

• Adjust night light brightness.

• Set a night light timer.

Melodies and soothing sounds

• Select play all melodies, or play

one of the five melodies and five

soothing sounds.

• You can also set the timer to

stop playing after 15, 30 or 60

minutes, or playing non-stop.

Alerts - Sound, motion and temperature

• Select the sound and motion

sensitivity level.

• Turn on/off sound and motion

detection alerts.

• Select maximum and minimum

temperature for alert range.

• Turn on/off temperature alert.

Parent unit settings

• Adjust parent unit screen

brightness.

• Adjust Low Battery Alert Tone.

• Adjust No Link Alert Tone.

• Turn on/off Dim mode.

Baby unit settings

• Turn on/off Night Vision.

• Turn on/off baby unit Status LED.

• Adjust baby unit speaker volume.

General settings

• Connect to home Wi-Fi network.

• Connect mobile phone.

• Reset Settings to factory default.

• Software Update.

Status icons

Direct mode

The parent unit and baby unit

connect to each other directly.

Red bars indicate no connection.

Router mode

The parent unit and baby unit

connect via the home Wi-Fi network.

The red icon(s) on the baby unit or

parent unit, indicates no connection

between the respective unit(s) and

the router.

Night vision is turned on.

Motion detection alert is turned on.

Sound detection alert is turned on.

Melodies and soothing sounds are

playing.

Night light is turned on.

Auto night light brightness is activated.

Temperature alert is turned on.

Parent unit is muted.

Humidity is lower than 30%.

Humidity is within 30-60%.

Humidity is higher than 60%.

Temperature is lower than 68°F.

Temperature is within 68°F and 75°F.

Temperature is higher than 75°F.

Battery level indicator.

1. Insert the First extension (A) onto the Second

extension (B), aligning the slot in between. Make

sure the DC socket is out on opening of the

Second extension and ready for connection.

Cautions:

• Wall mount should be 1m above the bed sheet level or baby, and 1.7m

above the floor. You can use the mounting template (a paper ruler) for

measurement.

• Wall mount should install on the long side of the bed.

A

B

2. Insert the Second extension (B) onto

the Mounting cover (D).

B

D

3. Let the cable jack of the Extension cable pass through from the back of

the Mounting cover (D), to the opening of the Second extension (B).

B

D

Install the wall mount

Scan QR code to

watch wall mount

installation video.

6. Insert 3 plastic screw anchors (H) into the

pre-drilled holes, then insert the screws

(H) into the wall anchors. Tighten the

screws until only 1/4 inch of the screws are

exposed.

Then, attach the Mounting bracket (E) onto

the wall.

C

4. Connect the cable jack with the DC socket, then secure the cable with the Extension

cover (C).

5. Use Mounting template to measure the

location of the wall mount, and to mark the 3

holes for the screws.

Then, drill three holes on the wall (7/32 inch

drill bit).

3ft (1m)

Center of the crib (long side)

E

H

Up side, to attach the

Mounting cover

8. Install the Cable covers (F) to prevent baby

from touching the cable.

Utilize the adhesive tape on the back of

the cable cover to stick the covers onto the

wall, or alternatively screw (I) the covers

onto the wall.

7. Place the Mounting cover (D) on the Mounting

bracket (E), and then slide it downward until it

locks into place.

E

D

1

2

F

I

G

F

9. Install the End cable cover (G to F) at last.

The wall mount setup

is completed!

OR

: There is oor stand available to purchase.

Product specificaties