Vonroc S_WC501AC Handleiding
Vonroc
Freesmachine
S_WC501AC
Lees hieronder de đ handleiding in het Nederlandse voor Vonroc S_WC501AC (9 pagina's) in de categorie Freesmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/9
WWW.VONROC.COM 2
A
B
3 6 7
2
1 0 11 1
4
5
98
12
312
765
13
WWW.VONROC.COM 3
C
D
16
15
17
18
19
14
20
21 5
76
10
EN
WWW.VONROC.COM
⢠Wait until the machine has reached full speed.
⢠Slowly move the machine along the pre-drawn
lines from top to bottom, ďŹrmly pressing the
guide roller (8) against the wall (ďŹg.H).
⢠Do not apply too much pressure on the machi-
ne. Let the machine do the work.
⢠Switch off the machine and wait for the ma-
chine to come to a complete standstill before
putting the machine down.
5. MAINTENANCE
Always disconnect the machine from the
main power supply before carrying out any
maintenance work.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt.
Remove very persistent dirt using a soft cloth
moistened with soapsuds. Do not use any solvents
such as gasoline, alcohol, ammonia, etc. Chemicals
such as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
⢠Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
⢠Normal wear and tear;
⢠The tool has been abused, misused or
improperly maintained;
⢠Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and ďŹtness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. SpeciďŹcations can be changed without
further notice.
Product specificaties
| Merk: | Vonroc |
| Categorie: | Freesmachine |
| Model: | S_WC501AC |
Heb je hulp nodig?
Als je hulp nodig hebt met Vonroc S_WC501AC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Freesmachine Vonroc
14 April 2023
20 Maart 2023
10 November 2022
Handleiding Freesmachine
- Freesmachine Bosch
- Freesmachine DeWalt
- Freesmachine Al-ko
- Freesmachine Alpina
- Freesmachine Bort
- Freesmachine Bruder Mannesmann
- Freesmachine Duro
- Freesmachine Einhell
- Freesmachine Elu
- Freesmachine Felisatti
- Freesmachine Ferm
- Freesmachine Festool
- Freesmachine Flex
- Freesmachine Fuxtec
- Freesmachine Gamma
- Freesmachine Gardena
- Freesmachine Grizzly
- Freesmachine Gude
- Freesmachine Hitachi
- Freesmachine Holzmann
- Freesmachine Kinzo
- Freesmachine Makita
- Freesmachine Maktec
- Freesmachine Parkside
- Freesmachine Powerplus
- Freesmachine Protool
- Freesmachine Rupes
- Freesmachine Scheppach
- Freesmachine Skil
- Freesmachine Stanley
- Freesmachine Stomer
- Freesmachine Texas
- Freesmachine Toledo
- Freesmachine Topcraft
- Freesmachine Triton
- Freesmachine Trotec
- Freesmachine Westfalia
- Freesmachine Worx
- Freesmachine Ozito
- Freesmachine Black And Decker
- Freesmachine Meec Tools
- Freesmachine Carat
- Freesmachine Eibenstock
- Freesmachine Power Craft
- Freesmachine Truper
- Freesmachine Mafell
- Freesmachine Yato
- Freesmachine Trend
- Freesmachine CMT Orange Tools
Nieuwste handleidingen voor Freesmachine
20 Maart 2024
12 Maart 2024
12 Maart 2024
21 Februari 2024
21 Februari 2024
20 Februari 2024
7 Februari 2024
30 Januari 2024
6 December 2023
6 December 2023