Vemer Klima 3V Handleiding

Bekijk gratis de handleiding van Vemer Klima 3V (1 pagina’s), behorend tot de categorie ivópalack. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.7 sterren uit 9 reviews. Heb je een vraag over Vemer Klima 3V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User Manual

AMBIENT GAS MEMBRANE THERMOST

Read all the instruction carefully

This thermostats is designed to regulate the temperature in domestic and

industrial environments.

SAFETY WARNINGS

During installation and operation of the device, it is necessary to comply

with the following instructions:

1) The device must be installed by a skilled person, in strict compliance with

the connection diagrams

2) Do not power on or connect the device if any part of it is damaged

3) After installation, inaccessibility to the connection terminals without

appropriate tools must be granted

4) The device must be installed and activated in compliance with current

electric systems standards

5) Before accessing the connection terminals, verify that the leads are not live

Code Model Contact Functions

VE018800KLIMA 2 NA -

VE019600KLIMA 3 NA + NC -

VE020400KLIMA 3L NA + NC Power on warning lamp

VE021200KLIMA SI NA + NC ON/OFF + Power on warning lamp

VE022000KLIMA IN NA + NC ON/OFF

VE023800KLIMA SW NA + NC Summer/Winter

VE024600KLIMA 2V NA + NC 2 speed + Summer/Winter/OFF

VE268900KLIMA 3V NA + NC 3 speed + OFF

TECHNICAL SPECIFICATIONS

• Free mounted single-pole mechanical thermostat

• Setting range: +5 / +30°C

• Differential: Δ ≤t 1°C

• Capacity of the contacts: 16(2,5)A 250V ~ for models KLIMA 2 e KLIMA 3

10(1,5)A 250V ~ for models KLIMA 3L, KLIMA SI, KLIMA IN,

KLIMA SW, KLIMA 2V, KLIMA 3V

• Thermal gradient: 1°C / 15 min.

• Sensitive element: vapour expansion lung

• Class I equipment

• Protection degree: IP20

• Type of action: 1B

• Silver contacts 1000/1000

• Break or switching contacts

• Pollution degree: 2 (normal)

• Voltage pulse: 4kV

• Operating temperature: 0 ÷ 40°C

• Operating humidity: 20 ÷ 90 %RH noncondensing

INSTALLATION

The thermostat should be tted at approximately 1.5 m from the ground avoid positioning

it near doors, windows, sources of heat and in places where there is too much or too little

ventilation.

1)The thermostat can be tted directly to the wall or to the ush-mounting box (centre

distance 60 mm).

2)Remove the knob, unscrew the screw of the cover and remove it

3)a) x the base to the wall

b) connect the thermostat earth by using the terminal marked with the earth symbol

c) follow the wiring diagram inside the cover; x the exible inseparable wires to the

relative screw terminals

d) replace the cover, screws and knob.

USER’S GUIDE

1)Set the temperature required by turning the knob;

2)To limit the setting eld:

a) Isolate the power supply line

b) Remove the knob

c) Insert the limit markers in the housing

under the knob (17°C ÷ 23°C

d) Return the knob to its housing.

REFERENCE STANDARDS

Conformity with EU directives: 2014/35/EU (LVD), 2014/30/EU (EMCD)

is declared with reference to the following standard: EN 60730-2-9

DIMENSIONS

ISCOM004-2105 Mod. KLIMA

Vemer S.p.A.

I - 32032 Feltre (BL) • Via Camp Lonc, 16

e-mail: info@vemer.it - web site: www.vemer.it

83,7

76,5

82,9

60

60

31

39

CONNECTIONS

KLIMA 2

T

+°C

16(2,5)A 250V~

N

L

KLIMA 3

T

+°C

16(2,5)A 250V~

N

L

KLIMA 3L

T

+°C

10(1,5)A 250V~

N

L

KLIMA IN

ON OFF

T

+°C

N

L

10(1,5)A

250V~

KLIMA SI

ON OFF

T

+°C

N

L

10(1,5)A

250V~

KLIMA SW

T

+°C

N

L

10(1,5)A

250V~

KLIMA 2V

OFF

I

II

T

+°C

N

L

10(1,5)A

250V~

KLIMA 3V

T

+°C

III

OFF

I

II

N

L

10(1,5)A

250V~

Note:

for “heating” operation

mode, remove the cable

terminal which is inside

the device from terminal

3 to teminal 2.

information to users pursuant to art. 14 of the directive

2012/19 / EU of the european parliament and of the council

of 4 july 2012 on waste electrical and electronic equipment (WEEE)

If the crossed-out bin symbol appears on the equipment or packaging,

this means the product must not be included with other general

waste at the end of its working life.

The user must take the worn product to a sorted waste center,

or return it to the retailer when purchasing a new one.

Products for disposal can be consigned free of charge (without any new purchase obligation)

to retailers with a sales area of at least 400 m

2, if they measure less than 25 cm.

An efficient sorted waste collection for the environmentally friendly disposal of the used device,

or its subsequent recycling, helps avoid the potential negative effects on the environment

and people’s health, and encourages the re-use and/or

recycling of the construction materials.

Product specificaties