Vaxcel Melbourne T0323 Handleiding

Bekijk gratis de handleiding van Vaxcel Melbourne T0323 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over Vaxcel Melbourne T0323 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 1/4

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0323

WARNING:

TOAVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Metal Frame

Fixture

Ball Nut (G)

Rubber Pad (H)

1. Energy saving fixture.

2. Use the dim-to-bright illumination option where

you want some minimum illumination through out

the night, such as at your front entrance or garage

door. Use the dark-to-bright illumination option

where you do not need minimum brightness, such

as the backyard or back porch.

3. When in manual override mode, use wall switch

to keep the light ON till dawn.

1. Read all instructions carefully before installation and

operation.

2. If you are not familiar with state and local electrical codes,

it is recommended that you consult with a qualified

electrician.

3. Before installation, shut off power at the main fuse or

circuit breaker box. Be aware that simply turning off the

wall switch is not sufficient to prevent an electrical shock.

4. This fixture requires a 120 VAC, 60 Hz power source.

5. Do not attempt to take the lantern apart; there are no

serviceable parts inside.

6. To avoid sensor damage by lightning or electrical surge,

make sure the grounding wire is securely connected.

7. For general safety and to avoid any possible damage to

the sensor, be sure the power is switched "off" before

replacing the bulb.

Maximum Wattage: 11W Dimmable LED

Work Temperature: - 4°F~104°F

Hardware Package (included)：

Mounting Screw (B)

Green Grounding

Screw (E)

Wire Nut (F)

Lock Nut (D)

Ball Nut (G)

Rubber Pad (H)

Cross Bar(A)

Headless Screw (C)

Green Grounding Screw (E)

Outlet Box

Wire Nut (F)

Headless Screw (C)

Cross Bar (A)

Mounting Screw (B)

Lock Nut (D)

House Grounding Wire

Fixture Grounding Wire

Fixture Wire

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

161028

Important to Know

Features

Fig.1

Clip

Glass

Curved Arm

Back Plate

Set Screw

Rubber Pad

Product specificaties