Vaxcel Akron W0284 Handleiding
Pagina's 2 Lamp
Bekijk de handleiding van Vaxcel Akron W0284 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
W0435 / W0376 / W0284
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Metal Shade
Socket Ring
Bulb Type A Max.100W
(Not included)
Bolt Nut (D)
Fixture
Hardware Package (included):
Mounting Screw (B)Wire Connector (C)Bolt Nut (D)Crossbar Unit (A)
Backplate
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Headless Screw
Crossbar Unit (A)
Fixture Wire
Fixture Ground Wire
Wire Connector (C)
Page 1 / 2
230331

1. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B).
2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
• Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
• Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
• Attach the fixture ground wire (bare wire) to the crossbar unit (A) with the green ground screw, then
depending on local code, connect it to the house ground wire with the wire connector (C).
Carefully put all the wires back into the outlet box.
3. Attach the backplate to the crossbar unit (A) by inserting the headless screw, then secure it with the two bolt nuts (D).
4. Attach the metal shades onto the fixture and tighten them with the socket rings.
5. Install 2 X 100W Max medium base bulbs (not included). See relamping label at socket area or packaging for maximum
wattage allowed.
Installation Steps
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
The following parts are available for reorder if damaged or missing.
Assembly Kit
6625MM (1SET) for W0435
6297MM (1SET) for W0376
5904MM (1SET) for W0284
Spare Parts List:
B
A
C
Socket Ring
5906SR
Mounting Screw (B)Wire Connector (C)
Bolt Nut (D)
Crossbar Unit (A)
1 Year Warranty
How can warranty service be obtained?
1-800-482-9235
Vaxcel warrants all of our products against defects in workmanship and finishes for one year following the date of
shipment.
Exclusions: This warranty does not include the failure of products from extreme acts of nature; environmental conditions
not suited for the products intended use; operation in temperatures outside of the range specified in the instruction
manual; usage with improper power supply, power surges or dips. For coastal locations, some corrosion is considered
normal for the environment.
Vaxcel reserves the right to repair, replace or issue a credit for any properly installed product, provided it is returned per
RMA instruction. This warranty is limited to the cost of the product only and does not extend to transportation, installation
or replacement costs.
Page 2 / 2
230331
Product specificaties
| Merk: | Vaxcel |
| Categorie: | Lamp |
| Model: | Akron W0284 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vaxcel Akron W0284 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden