Vaxcel Acadia C0374 Handleiding


Pagina's 4 Verlichting

Bekijk de handleiding van Vaxcel Acadia C0374 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
P0474 / C0374
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Installation Steps for Pendant:
Loop
Canopy (D)
Collar (E)
Quick Link (F)
Quick Link (F)
Chain (G)
Threaded Pipe
Fixture
Threaded Pipe (J)
Outlet Box
Housing Ground Wire
Wire Connector (C)
Fixture Wire
Fixture Ground Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Threaded Pipe
Hex Nut
Washer
Top Loop
Coupling
Metal Pad (L)
Metal Pad (L)
Rubber Pad (K)
Rubber Pad (K)
Hex Nut (M)
Finial (O)
Cover (N)
Glass Shade
Mounting Strap Unit (A)Wire Connector (C)
Collar (E)
Mounting Screw (B)
Canopy (D)
Quick Link (F)
Chain (G)
Mounting plate Unit (H)
Set Screw (I)
Max. 60W
Medium Bulb
(not included)
Threaded Pipe (J)
Hex Nut (M)
Rubber Pad (K)
Cover (N)Finial (O)
Metal Pad (L)
1. Attach the mounting strap unit (A) to the outlet box
using two mounting screws (B).
2. Attach the loop to the fixture with threaded pipe.
3. Choose the length of the chain (G) you needed, then
weave the fixture wire and the fixture ground wire
through the chain (G), collar (E) and canopy (D).
4. Connect the chain (G) to the loop and the top loop on
mounting strap unit (A) with two quick links (F).
5. Thread the fixture wire and fixture ground wire through
the top loop, threaded pipe of the mounting strap unit (A).
Page 1 / 4
260604
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
Installation Steps for Semi-Flush Mount:
1. Unscrew the two set screws (I) from the mounting plate unit (H).
2. Attach the mounting plate unit (H) to the outlet box by using two
mounting screws (B).
3. Unscrew the two long set screws
from the canopy, then discard the
long set screws.(See Fig.1).
4. Cut excess fixture wires leaving only
8" (20cm) of wire from the top end
of the threaded pipe. Next, strip off
3/4" (2cm) of the plastic wire coating.
Remove the loop from the fixture
(See Fig. 2).
5. Pull out the source wires from the outlet box. Make wire
connections using wire connectors (C) as follows:
---Connect the smooth-coated wire (marked) from
the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from
the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting plate
unit (H) with the green ground screw, then connect it
to the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
6. Attach the canopy to the mounting plate unit (H), and then
secure it with two set screws (I).
7. Install 2 x 60W max. medium base bulbs (not included).
See relamping label at socket area or packaging for maximum
wattage allowed.
8. Secure the threaded pipe (J) into the coupling of the fixture.
House Ground Wire
Fixture Ground Wire
Wire Connector (C)
Mounting Plate Unit (H)
Green Ground Screw
Mounting Screw (B)
Outlet Box
Fixture Wire
Canopy
Set Screw (I)
Threaded Pipe (J)
Coupling
Metal Pad (L)
Metal Pad (L)
Rubber Pad (K)
Rubber Pad (K)
Hex Nut (M)
Finial (O)
Cover (N)
Glass Shade
A
Outlet Box
Support Brace
Canopy
Coupling Kit
6. Pull out the outlet wires and house ground wire from the outlet box. Make wire connections using the wire connectors (C):
---The smooth wire (marked) from the fixture to the black wire from the power source.
---The ribbed wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the house
ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
7. Attach the canopy (D) to the mounting strap unit (A) by inserting the top loop, then tighten the collar (E) to secure it.
8. Install 2 x 60W Max. medium base bulbs (not included).
See relamping label at socket area or packaging for maximum wattage allowed.
9. Secure the threaded pipe (J) into the coupling of the fixture.
10. Attach metal pad (L), rubber pad (K) the glass shade to the fixture by inserting the
threaded pipe (J) through glass shade, and then secure it with the rubber pad (K),
metal pad (L), hex nut (M), cover (N) and finial (O).
11. (Fig.A)Angled mounting recommended for a vaulted or angled ceiling .
Page 2 / 4
1
Canopy
Long Set
Screw
Loop
Threaded Pipe
Canopy
2
260604
Turn on the power at fuse or circuit box
Mounting Strap Unit (A)Wire Connector (C)
Collar (E)
Mounting Screw (B)
Canopy (D)
Quick Link (F)
Chain (G)
Mounting plate Unit (H)Set Screw (I)
Threaded Pipe (J)
Hex Nut (M)
Rubber Pad (K)
Cover (N)Finial (O)
Metal Pad (L)
9. Attach metal pad (L), rubber pad (K) the glass shade to the fixture by inserting the threaded pipe (J) through glass
shade, and then secure it with the rubber pad (K), metal pad (L), hex nut (M), cover (N) and finial (O).
The following parts are available for reorder if damaged or missing.
Spare Parts List
:
Mounting Hardware
7282MM (1SET)
Assembly Hardware
7283MM (1SET)
Glass Shade
10617FW
Selecting Main Light or Night Light Mode
1. The fixture has three fixed sequential modes:
Mode 1 (light bulbs only), Mode 2 (LED night light only) and
Mode 3 (both light bulbs and the LED night light turn on simultaniously)
a. Flip the wall switch ON after installation to enter Mode 1 (light bulbs only).
b. Flip the wall switch OFF and back ON in less than 3 seconds to enter
the Mode 2 (LED night light only).
c. Flip the wall switch OFF and back ON again in less than 3 seconds to
enter Mode 3(both light bulbs and LED night light)
This fixture is dimmable with a forward phase electronic dimmer. Dimmers
tested to be compatible with this Fixture are the Lutron:
SCL-153P, LECL-153P.DVCL-153P.
If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s).
NOTE: If the fixture is turned off for more than 6 seconds, the mode will automatically revert to the default
Mode 1 (light bulbs only).
1
Night Light
Main Light
Page 3 / 4
260604

Beoordeel deze handleiding


Product specificaties

Merk: Vaxcel
Categorie: Verlichting
Model: Acadia C0374

Heb je hulp nodig?

Als je hulp nodig hebt met Vaxcel Acadia C0374 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden