USX-Mount SAS008 Handleiding
USX-Mount
luidsprekersteun
SAS008
Lees hieronder de 📖 handleiding in het Nederlandse voor USX-Mount SAS008 (2 pagina's) in de categorie luidsprekersteun. Deze handleiding was nuttig voor 2 personen en werd door 1.5 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
SAS008
INSTRUCTION MANUAL
If you have any questions along the way,
please leave us
message via Amazon.
We’re ready to help!
R
USA-B1
Before getting started, let’s check below lists to make sure it is just right for you!
1
2
3
4
Does your soundbar
(including accessories)
weigh MORE than
22 lbs. (10 kg)?
Do you have
all the tools
needed?
(NOT INCLUDE)
Tape
Measure
CAUTION
Pencil Electric
Drill
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs?
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete
?
3/8 in.
(10 mm)
Socket
Wrench
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
Message to us.
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
Level
If you want to mount
on the wall, you
should know what
your wall made of.
2
FRONT VIEW
3-D
3
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for Brackets Installation
x
2
￠
1.6
x
25
mm
Nail
Wall
Bracket
M
6
x5
0
mm
Lag Bolt
Allen Key
x
1
x
2
x
24
4
5
6
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR O USE AND SAVE THESE INSTRUCTIONS T
Parts and Hardware
Dimensions
!
STEP 1 Split wall bracket into 2 parts
Max:
22 LBS
(10 kg)
70mm
[2.76in]
72mm
[2.83in]
Contact us
and
message to us
to have these
additional pieces shipped directly to you.
Concrete Wall
Anchor
2pcs
Co
ncrete wall anchor (NOT INCLUDED)
06
03 04
05
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must exceed 3/8 in. (10 mm)
Loosen the screw (the screw remains on the hook) with allen key , and split it into two parts: the
wall plate and the hook .
06
01
02
05
Screw
Loosen
1. Please measure the length (L) of your soundbar .
Option 1 For Drywall
STEP 2 Wall plate installation
Stud
Finder
1/8 in.
(3 mm)
Wood
Drill Bit
Solid Drywall
Per
fect!
Per
fect!
Per
fect!
Wood Stud Install
Concrete Install
Drywall Install
RIGHT VIEW - RETRACTED RIGHT VIEW -
EXTENDED
105mm
[4.13in]
160mm
[6.30in]
2. Fixing the wall plates to the drywall with 24 steel nails .
IMPORTANT: The installation distance of the two wall plates should be less than the soundbar
length (L), and the distance between the wall plate and the ground is H.
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
01
04
L
＜
L
H
H
Drywall
Level
05
01
02
04
01
7
3. Insert 2 anchors.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
4. Install wall plate using 2 lag bolts . Tighten the lag bolts only until they are pulled firmly against
the wall plate.
9
Concrete Wall
Anchor
(Not included)
3/8"
(10mm)
2.16"(55mm)
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly directly onto the concrete surface
● Minimum
solid concrete
thickness: 8 in. (203 mm)
2. Drill 2 pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT:
The installation distance of the two wall plates should be less than the soundbar
length (L), and the distance between the drilling position and the ground is H. Pilot holes
must be drilled to a depth of 2.16 in. (55 mm).
8
10
12
11
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
Please
message to us
to
ask for
these
additional
anchors shipped directly to you.
Option 2 For solid concrete wall or brick wall
01
03
Level
03
01
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.16 in. (55 mm). Be sure to drill into the center
of the studs.The distance between the drilling position and the ground is H.
4.
F
ix wall plate
to the wall
with
lag bolts
.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
2.16"(55mm)
1
/
8
"
(
3
mm)
Level
NEVER USE ANCHOR FOR WOOD STUDS ASSEMBLY
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
01
03
03
01
Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum
wood stud
size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Stud center must be verified.
1. Please measure the length (L) of your soundbar.
2. Finding your wooden studs and mark the center of the wooden studs.
Option 3 For wood studs
1. Please measure the length (L) of your soundbar.
IMPORTANT:
The installation distance of the two wooden studs centre should be less than the
soundbar length (L), If it is longer than the soundbar length (L), you can finish the
installation on drywall directly as option 1.
Again, find another wood stud
Hang the hooks onto wall plate and tighten the screws.
If the width of your soundbar is within 3.5” ~5.6”, you can just simply put your soundbar on the hooks.
You can adjust the hook width by bolts as below drawing shown.
Tighten
Loosen
Soundbar
STEP 3 Hang the Hooks onto wall plate
02
05
Screws
Tighten
STEP 4 Put the Soundbar onto hooks
05
05
Concrete Wall
L
＜
L
H
H
L
＜
L
H
H
Concrete Wall Concrete Wall
Product specificaties
| Merk: | USX-Mount |
| Categorie: | luidsprekersteun |
| Model: | SAS008 |
Heb je hulp nodig?
Als je hulp nodig hebt met USX-Mount SAS008 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding luidsprekersteun USX-Mount
13 Mei 2025
13 Mei 2025
13 Mei 2025
12 Mei 2025
Handleiding luidsprekersteun
- luidsprekersteun Sonos
- luidsprekersteun Monoprice
- luidsprekersteun Canton
- luidsprekersteun Focal
- luidsprekersteun Bang And Olufsen
- luidsprekersteun Vimar
- luidsprekersteun Pyle
- luidsprekersteun Yamaha
- luidsprekersteun Vivolink
- luidsprekersteun Sanus Systems
- luidsprekersteun Bowers Wilkins
- luidsprekersteun Crestron
- luidsprekersteun Norstone
- luidsprekersteun Philips
- luidsprekersteun Barkan
Nieuwste handleidingen voor luidsprekersteun
6 Juni 2025
15 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025