QualGear QG-SB-001-BLK Handleiding
QualGear
luidsprekersteun
QG-SB-001-BLK
Bekijk gratis de handleiding van QualGear QG-SB-001-BLK (6 pagina’s), behorend tot de categorie luidsprekersteun. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.3 sterren uit 4 reviews. Heb je een vraag over QualGear QG-SB-001-BLK of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
Version May 2019Version May 2019
1 2
Parts Checklist
WARNING
Hardware ckagePa
IMPORTANT: Before starting installation, please check that all parts shown in this checklist
are included. If any parts are missing or damaged, contact your local distributor or
support@qualgear.com for replacement parts and do not start assembly and installation
until you receive all the parts.
Soundbar Bracket
M4x14 (x2)
E
M6x14 (x4)
K
M8x50 (x4)
O
5mm Small Spacer (x8)
P
15mm Large Spacer (x8)
Q
Plastic Washer (x2)
R
M6x20 (x4)
L
M8x20 (x4)
M
M6x30 (x4)
N
M5x14 (x2)
F
M6x14 (x2)
I
M6 (x2)
J
M6x14 (x2)
G
D5 Washer(x2)
H
M6x10 Screw (x4)
C
M6 Nut (x4)
D
A (x2)
Extension Arms
B (x2)
Do not begin to install your QualGear product
until you have read and understood all the
instructions and warnings contained in this
installation manual. If you have any questions
regarding the instructions, for US customers
please contact QualGear customer support
via email at support@qualgear.com. For
all international customers, please contact
your local distributor.
This product should only be installed by
s eone of good c nical aptitude, has om me ha
ex ence with basic ding construction, peri buil
and fully erstands these instructions.und
This product was designed to be installed
and utilized only as specified in this manual.
Improper installation of this prod
uct may cause
damage or serious injury. QualGear is not
liable for the improper use or installation of its
products.
Make sure that the s porting surface up
will safely s port the c ined load of the up omb
equipment and all attached ware and hard
c nents.ompo
Always use an assistant or mec nical ha
lifting ment to safely lift and position the equip
equipment.
Tighten screws firmly, but do not over tighten.
Over tightening can damage the items, greatly
reducing their holding power.
All QualGear products are intended for
indoor use only and any outdoor use voids the
limited ranty.war
All QualGear products are designed
and tested for residential use only and any
c ercial use voids the limited omm warranty.
For warranty information, please visit
http://www.qualgear.com/warranty.php.
Never exceed the maximum rated ight we
specified in this ual.man
All bolts and screws must be used at the
designated points in the installation instructions
to pre provent perty damage and/or personal
injury.
DO NOT install near air conditioner vents or
where there is exce
ssive dust or smoke.
Please read the entire installation manual. Check to ensure that all parts are included
before you start installation and assembly.
NOTE
3
4
For Smaller Soundbar Installation
1a
Attaching the Soundbar Brackets to the Soundbar
Attaching the Wall Mount Brackets to the TV and to the Soundbar Brackets
NOTE
Soundbar brackets are designed to be sandwiched in
between the back of the TV and the wall mount bracket.
If your soundbar has holes on the back, attach the teardrop
appropriate screws and nuts to the soundbar brackets.
Hang the soundbar on the screws, making sure the screw
heads fit properly in the soundbar's holes.teardrop
Adjusting the Soundbar Brackets on the Back of the TV
Align the soundbar brackets and the
mounting hole on your TV.
A
Soundbar Bracket
G
E/F
H
I
J
Choose the appropriate screws and washers
(if necessary) according to the type of your soundbar.
Screw the soundbar brackets onto the soundbar.
A
Soundbar Bracket
Wall Mount Bracket
(not included)
Choose the appropriate screws, washers, and spacers (if necessary) according to the type
of your TV. Attach the wall mount brackets to the mounting holes on the back of the TV and to the
soundbar brackets. See illustrations on page 4 & 5.
OR
OR
teardrop
hole
CONTINUE >
Speaker (not included)
Speaker
L/M
P
L/M
P
R
K
K
L/M/N
L/M/N
P
P
R
OR OR
1
2
3
Speaker (not included)
R
Product specificaties
| Merk: | QualGear |
| Categorie: | luidsprekersteun |
| Model: | QG-SB-001-BLK |
Heb je hulp nodig?
Als je hulp nodig hebt met QualGear QG-SB-001-BLK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding luidsprekersteun QualGear
16 Juni 2025
16 Juni 2025
Handleiding luidsprekersteun
- Valcom
- Philips
- Konig
- Toa
- Teufel
- Axis
- My Wall
- OmniMount
- Bose
- Multibrackets
- LD Systems
- Newstar
- Sanus Systems
- NeoMounts
- Tannoy
Nieuwste handleidingen voor luidsprekersteun
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
10 Juni 2025
6 Juni 2025
15 Mei 2025
13 Mei 2025
13 Mei 2025