Allnet ALL-SG9440MJ-10G Handleiding
Pagina's 5 Schakelaar
Bekijk de handleiding van Allnet ALL-SG9440MJ-10G gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
© ALLNET GmbH Computersysteme 20All rights reserved25 –
Errors and changes reserved
Quick Install Guide
ALL-- SG9440MJ10G
To access the web interface of the ALL-SG9440MJ-10G, please start
your browser.
This are the factory default settings:
IP-d Adress: 192.168.2.1
Username & Password : admin
Use this configuration to access the webinterface for your PC:
IP: 192.168.2.(X X = 2- 1254(don’t use , because it is reserved by
the switch) Subnetmask 255.255.255.0.
Next start your browser and type 192.168.2.1 into the browser
address bar. Apply with enter.
RESET TO FACTORY DEFAULT:
Press the “” button for about 0 seconds. All LEDs will light up Reset1
briefly. Now the switch can be accessed via the default login data:
192.168. – 2.1admin / admin
If you want to use the console, use these parameters:
Speed: 115200
Data: 8 bit
Parity: none
Stop bits:1 bit
Flow control: none
© ALLNET GmbH Computersysteme 20All rights reserved25 –
Errors and changes reserved
Safety Instructions
Please be sure to observe the following instructions:
General notes
•Only use the device for the purpose it was designed.
•Only use the device as described in the Quick Start Guide or manual.
•Any other use is considered improper and may result in property damage.
•Neither ALLNET
®
nor the dealer accepts liability for damage caused by
improper or incorrect use.
•All safety instructions must be read through.
•The manual should be kept for future reference.
Mounting instructions
•NEVER place the device near radiators, air conditioners or water sources.
This greatly increases the risk of electric shocks, short circuits or fire.
•The humidity should be between 20% and 80%, otherwise condensation
may occur.
•Protect the device from direct sunlight, extreme heat, open fire and dust.
Otherwise, the risk of electric shocks, short circuits or fire increases.
•Never place the device on surfaces that are sensitive to heat.
•Do not use the device in damp rooms and under no circumstances in
potentially explosive areas.
•The device is designed for use in enclosed spaces.
Operating notes
•Operate the device only with the voltage indicated on the device or on
the included power supply unit.
•Any batteries present are only to be replaced with the same or an
equivalent type.
•Do not use obviously defective devices. If the unit does not operate
normally – especially if unusual odors or noises occur unplug the power –
cord from the socket immediately.
•Never expose the device to direct sunlight during operation.
•Never operate the device near sources of heat.
•Protect the device from moisture, dust, liquids and vapors.
© ALLNET GmbH Computersysteme 20All rights reserved25 –
Errors and changes reserved
•Never open the device.
•Work on the device may only be carried out when the device has been
disconnected from its power source.
•The device may only be operated by persons who have read the
instructions or have been instructed in ioperation by a competent ts
person.
Instructions for repair and maintenance.
•Repairs may only be carried out by trained, authorized personnel.
•Regular maintenance is not necessary.
•Never open the device.
•For cleaning work, disconnect the device from its power source.
•Do not use any cleaning agents containing solvents for cleaning, but only
a soft, dry antistatic cloth.
•It is forbidden to make any modifications to the unit.
•Damaged devices or damaged components may no longer be used.
Product specificaties
| Merk: | Allnet |
| Categorie: | Schakelaar |
| Model: | ALL-SG9440MJ-10G |
Heb je hulp nodig?
Als je hulp nodig hebt met Allnet ALL-SG9440MJ-10G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden