Uniden EXAI 8580 Handleiding

Uniden Telefoon EXAI 8580

Lees hieronder de 📖 handleiding in het Nederlandse voor Uniden EXAI 8580 (17 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17

At Uniden, we'll take care of you!

Thank you for purchasing a Uniden product.

If you have any questions or problems,

please do not return this product to the place of purchase.

Having Trouble?

Our customer care specialists are here to help you! Visit our website at www.

uniden.com or call our Customer Hotline at during 1-800-297-1023

regular business hours.*

Need a Part?

To order headsets, additional handsets, replacement batteries or other

accessories, visit our website at or call www.uniden.com 1-800-554-3988

during regular business hours.*

Help for our Special

Needs Customers

Uniden provides a customer service hotline for accessibility questions. If

you have disability and need customer service assistance or if you have any

questions about how Uniden's products can accommodate persons with

disabilities, please call the accessibility voice/TTY line:

1-800-874-9314 (voice or TTY).

Accessibility information can be found on our website, , www.uniden.com

under the "Accessibility" link. If your call is received outside of our business

hours, leave us a message and we will call you back.

* Central Standard Time. Detailed customer service hours are available at www.uniden.com.

Contains additional foreign articles.

Printed in China UCZZ01066BZ(0)

UNIDEN

CORDLESS

TELEPHONES

EXAI8580 Series

CUT

REMOTE OPERATION CARD

Remote access away from home

1. Call your phone number from a

touch-tone phone.

2. During the outgoing message,

press and enter your PIN code.[0]

The answering system announces the

number of messages stored in memory

and the voice prompts. The phone

stands by for you to enter a command.

3. To quit, hang up the phone.

Turn on the answering system

remotely

1. Call your phone and let it ring

10 times until it answers.

2. Press and enter your PIN code.[0]

3. Press then to stop the [0] [5]

announcement.

4. Press then to turn the [0] [6]

answering system on.

Remote Operation Card

1) Installing the Phone

1-1. Choosing the Best Location

To get the best performance out of your new phone, put it in the best location:

Near an AC outlet

and a telephone

wall jack.

• Microwave ovens

• Refrigerators

• Fluorescent

lighting

• Dust

• Excessive

moisture

• Other cordless

telephones

In a

centrally-located

open area.

PLACE YOUR BASE

• TVs

• Other electronics

• Direct sunlight

• Extreme temperatures

• Personal computers

• Wireless LAN

equipment

• Dust

• Excessive

moisture

• Areas with

a lot of

background

noise

• Shock

• Vibration

• Shock

• Vibration

TRY TO AVOID

Notes: For maximum range

Keep both the base and handset antennas free of obstruction.

When the handset is not in use, place the handset in an upright position.

Metal and reinforced concrete may aect cordless telephone performance.

•

1-2. Plug in the Battery

Use only the Uniden BT-905 rechargeable battery pack supplied with your phone.

1Locate the battery pack,

battery cover and handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1Locate the battery pack,

battery cover and handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1-3. Plug in the Base

Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or

worn out, it can create a re or electrical hazard.

4Put the base's AC adapter cord through the hole in the stand

and connect the AC adapter to the jack.DC IN 9V

Connect the AC adapter to a standard 120V AC wall outlet.

DO NOT use an AC outlet controlled by a wall switch.

Route the cord

through the molded

wiring channel.

To AC outlet

AC adapter

(supplied)

To DC IN 9V

4Put the base's AC adapter cord through the hole in the stand

and connect the AC adapter to the jack.DC IN 9V

Connect the AC adapter to a standard 120V AC wall outlet.

DO NOT use an AC outlet controlled by a wall switch.

Route the cord

through the molded

wiring channel.

To AC outlet

AC adapter

(supplied)

To DC IN 9V

Note: For optimum battery life, charge your handset completely before you connect the telephone

cord. The rst time you charge a new battery, allow 15 to 20 hours.

1-4. Connect the Telephone Cord

Note: If the telephone cord does not t into your telephone wall jack, contact your local phone provider for

assistance.

If you receive high-speed internet service through your

telephone line (referred to as DSL), you should install

a DSL lter between the telephone base and the wall

jack. Standard telephones often can’t operate correctly

without a DSL lter.

Testing the connection

12 Make a quick test call, and then press to hang up.[END]

What if the call doesn't go through?

Try changing the dial mode (see below).

What if there is a lot of static?

Check the sources of interference described in section

1-1 on Choosing the best location: is the base near

any of those?

Changing from tone to pulse dialing (DIAL)

Your phone can communicate with the telephone network in two dierent ways: tone dialing or pulse dialing.

These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone

dialing.

If your phone company uses pulse dialing, you need to change your phone’s dial settings. If you don't get a dial

tone or can't connect to the telephone network, follow the steps below to modify your phone’s settings:

With the phone in standby, press and hold . [cid/menu]

Press to move the pointer to DIAL.[ ]

Press to set the phone to pulse dialing.[select/channel]

Press [END] put the handset back in the base and . The handset communicates the new setting to the

base.

Note: If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated

response system, for example), press to temporarily switch to tone dialing. When the call [ /tone/ ]

ends, the phone automatically returns to pulse dialing mode.

Now your phone is ready to use!

What if the charge LED doesn't

light up?

• Check AC adapter connection.

• Make sure you are not using

an outlet that's controlled by

a wall switch.

Place the handset in the base. Make sure that the

charge/in use LED

illuminates.

What if the charge LED doesn't

light up?

• Check AC adapter connection.

• Make sure you are not using

an outlet that's controlled by

a wall switch.

Place the handset in the base. Make sure that the

charge/in use LED

illuminates.

8Connect the telephone cord to the jack on the rear of the base.TEL LINE

Connect the telephone cord

to a telephone wall jack.

Route the cord through

the hole in the stand

and into the molded

wiring channel.

To telephone

wall jack

Telephone cord (supplied)

To TEL LINE

8Connect the telephone cord to the jack on the rear of the base.TEL LINE

Connect the telephone cord

to a telephone wall jack.

Route the cord through

the hole in the stand

and into the molded

wiring channel.

To telephone

wall jack

Telephone cord (supplied)

To TEL LINE

Telephone

wall jack

Telephone cord

DSL filter

Telephone

wall jack

Telephone cord

DSL filter

11 Pick up the handset from the base and press .[TALK/flash]

You should hear a dial tone, and the display should show TALK.

What if I can't hear a dial tone?

Check the telephone cord connection on the base.

What if the display doesn't show TALK?

Put the handset back in the base for at least five seconds.

Make sure the LED flashes.charge/in use

Talk 0:01

11 Pick up the handset from the base and press .[TALK/flash]

You should hear a dial tone, and the display should show TALK.

What if I can't hear a dial tone?

Check the telephone cord connection on the base.

What if the display doesn't show TALK?

Put the handset back in the base for at least five seconds.

Make sure the LED flashes.charge/in use

Talk 0:01

Product specificaties

Merk:	Uniden
Categorie:	Telefoon
Model:	EXAI 8580

Heb je hulp nodig?

Als je hulp nodig hebt met Uniden EXAI 8580 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon Uniden

Uniden D3588-2 Handleiding

15 Juni 2023

Uniden DCX400 Handleiding

14 Juni 2023

Uniden XS 1415+1 Handleiding

14 Juni 2023

Uniden DECT 1635 Handleiding

13 Juni 2023

Uniden EXI 2926 Handleiding

12 Juni 2023

Uniden DRX 402 Handleiding

6 Juni 2023

Uniden XDECT 7005 Handleiding

6 Juni 2023

Uniden DCT 746M Handleiding

5 Juni 2023

Uniden EXI 7246C Handleiding

31 Mei 2023

Uniden D2280 Handleiding

27 Mei 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

Samsung SGH-E490 Handleiding

16 April 2024

Gamdias Pheme M1 Handleiding

16 April 2024

Tador KX-T927-MT Handleiding

13 April 2024

Essentiel B Nivalis 15.1 Handleiding

9 April 2024

Essentiel B Nivalis 15.2 Handleiding

9 April 2024

Geemarc PhotoPHONE 110 Handleiding

9 April 2024

Lindy 42980 Handleiding

9 April 2024

Geemarc SOS-PRO 595 Handleiding

9 April 2024

Geemarc ClearSound CL60 Handleiding

8 April 2024

Geemarc DALLAS10 Handleiding

8 April 2024